DIY Koi Tank Upgrade: Build Your Own Barrel Filter for Crystal Clear Water.

[@dagrind8710]

Nice video great set up

[@gtrsquared919]

Glad you enjoyed it and thanks for watching. Please subscribe if you haven't done so already.

[@JAGADISH.RR-JC]

Why are the barrels kept step by step? Can we keep all 3 barrels at the same level?

[@wainyone]

What power is your air pump used please

[@gtrsquared919]

It's a Matala air pump and has a volume of 65 litres per minute. Model HK-60L

[@8284tunguyen]

can i please have all the plumbing parts sir. please please

[@gtrsquared919]

I will put it together and then post it in the comments. Give me a couple of days. Thanks for watching the video.

[@gtrsquared919]

Here is the list of all of the plumbing parts you will need.
3- Barrels
9- Bulkhead fittings to match the diameter of the ABS pipe you will be using
21- ABS 90 Degree (Hub, Hub) elbow fittings to match the diameter of the ABS pipe you will be using
4- ABS (or compatible) Ball valves (Hub, Hub) to match the diameter of the ABS pipe you will be using
2- ABS T-Y fittings (Hub, Hub, Hub) to match the diameter of the ABS pipe you will be using
9- ABS Hub to MIPT adapter fittings to match the diameter of the ABS pipe you will be using
3- Hub drain screens to match the diameter of the ABS pipe you will be using
3- 3D printed cone screens
Approximately 20 feet of ABS pipe (we used 1 1/2", you could also use 2" if you want a allow for a higher flow rate)
1- 12" section of 4" ABS pipe with a 4" ABS cap
Section of corrugated flexible hose to connect your water pump to the filter.
Any specific fittings you need to connect your water pump and the corrugated flexible hose.
Drain hose and appropriate fittings to connect to drain line.
4 Cubic Feet of K1 Media
1 Air stone, air hose and air pump
Wood for step up bases and platform

[@Janstropical]

Need help with the screens
Great setup

[@nurrahman-g8l]

a