- 243
- 1 491 852
Resto Designs
United Kingdom
เข้าร่วมเมื่อ 8 ส.ค. 2018
Welcome to your #1 Destination for real continuous Golf MK2 & MK3 & mk4 content on TH-cam!
Been modifying and building cars for over a two decades and helping others with their project cars also, I mainly cover Golf mk2's and mk3's at the moment with future plans to do other 80's & 90's hero cars!. Project's will be done from start to end and mixed up with 'How to' video's.
Ego's are left at the door on this channel, it's all about the love of all things 80's & 90's. Welcome and I hopefully you will find something that will be of instead to you and thank you for your support!
Been modifying and building cars for over a two decades and helping others with their project cars also, I mainly cover Golf mk2's and mk3's at the moment with future plans to do other 80's & 90's hero cars!. Project's will be done from start to end and mixed up with 'How to' video's.
Ego's are left at the door on this channel, it's all about the love of all things 80's & 90's. Welcome and I hopefully you will find something that will be of instead to you and thank you for your support!
Project Freebie Super 1400 pt2
If you're enjoying the content, please consider subscribing to the channel!
Resto Designs website : www.restodesigns.com
Gone is the 2.0 16V with 02S 6 speed gearbox and in it's place I dropping in a light weight E111 small block 1.4 engine from the Golf mk3 ABD 60hp, This engine looks the same as the mk2 1.3 55hp motor, but this 1400s build has the 3F Muti point injection inlet manifold, dbilas 272º cam and standalone k-date ECU. My aim is 100hp and hopefully a lot of fun to drive due small high rev motor and a drop in weight of some 50-60kg over the front wheels.
Resto Designs website : www.restodesigns.com
Gone is the 2.0 16V with 02S 6 speed gearbox and in it's place I dropping in a light weight E111 small block 1.4 engine from the Golf mk3 ABD 60hp, This engine looks the same as the mk2 1.3 55hp motor, but this 1400s build has the 3F Muti point injection inlet manifold, dbilas 272º cam and standalone k-date ECU. My aim is 100hp and hopefully a lot of fun to drive due small high rev motor and a drop in weight of some 50-60kg over the front wheels.
มุมมอง: 435
วีดีโอ
Project Freebie IS BACK With a New Engine Build!
มุมมอง 810หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com Gone is the 2.0 16V with 02S 6 speed gearbox and in it's place I dropping in a light weight E111 small block 1.4 engine from the Golf mk3 ABD 60hp, This engine looks the same as the mk2 1.3 55hp motor, but this 1400s build has the 3F Muti point injection inlet manifold, dbila...
Golf mk2 GTI 16V ABF Subframe Issues
มุมมอง 2K2 หลายเดือนก่อน
This super clean Golf mk2 GTI 16V project came in last week and it's still here, So this has turned into a how to Golf mk2 front subframe bolt fix and Golf mk3 with Audi TT/S3 lower arm bushes. If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com
Golf GTI mk2 16V ABF
มุมมอง 1.3K2 หลายเดือนก่อน
This super clean Golf mk2 GTI 16V project needs a few small touches. If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com
Golf mk1 2 0 8V Standalone ECU Pt2.
มุมมอง 5593 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com This early 1981 Golf mk1 GLI came into Resto Designs, the customer has had this sitting around for about 5 years and really would like it back up and running once and for all. K data ECU
How Golf mk2 Steering Column Refresh
มุมมอง 2.1K4 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Also checkout the Resto Designs website : www.restodesigns.com
How Golf mk4 Heater Leaking No Hot Air
มุมมอง 8504 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Also checkout the Resto Designs website : www.restodesigns.com Does your Golf 4 Bora Jetta 4 you have a leaking heater, are you getting no hot air, well you need to checkout this amazing step by step how to video made here at Resto Designs.
Type 19 Golf GTI 2.0 8V ECU Part 2
มุมมอง 1.2K5 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com VW Golf mk2 type 19 GTI 2.0 8V standalone ECU
Type 19 Golf GTI 2 0 8V Standalone ECU
มุมมอง 1.8K5 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com
My Dream Garage Build Pt2
มุมมอง 7055 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com My Dream garage build with a few great ideas and getting it ready for the new year ahead 2024.
How To VW Golf Oil Cooler mk2 mk3
มุมมอง 2.3K6 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com How to VW Golf Oil cooler issues, in this video a see why oil has gotten into the coolant system. Golf mk1 Golf mk2 Golf mk3 Golf mk4
All the VW's @ Essen 2023 Resto Designs
มุมมอง 5986 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com
Golf mk2 2 0 16V Year Two
มุมมอง 1.1K6 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com
Golf mk1 GTI What a Mission!
มุมมอง 6877 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com This early 1981 Golf mk1 GLI came into Resto Designs this week, the customer has had this sitting around for about 5 years and really would like it back up and running again.
K1 Max 3D Printing Car Parts
มุมมอง 8477 หลายเดือนก่อน
If you're enjoying the content, please consider subscribing to the channel! Resto Designs website : www.restodesigns.com Creality K1 MAX 3D Printer nightmare....maybe?
1981 Golf mk1 GLI 2 0 Will it start!?
มุมมอง 5098 หลายเดือนก่อน
1981 Golf mk1 GLI 2 0 Will it start!?
Dummy gets a 3D Printer to make car parts!
มุมมอง 3.8K8 หลายเดือนก่อน
Dummy gets a 3D Printer to make car parts!
Golf mk2 GTI 16V Koni Sports or Bilstein B12
มุมมอง 1.7K9 หลายเดือนก่อน
Golf mk2 GTI 16V Koni Sports or Bilstein B12
VW Golf mk2 GTI 8V Project Joker pt8.1
มุมมอง 1.2K9 หลายเดือนก่อน
VW Golf mk2 GTI 8V Project Joker pt8.1
Golf mk2 GTI 8V 2.0 Project Joker Pt8
มุมมอง 1.1K10 หลายเดือนก่อน
Golf mk2 GTI 8V 2.0 Project Joker Pt8
Golf mk2 GTI Resto Project One Step Closer
มุมมอง 1.1K10 หลายเดือนก่อน
Golf mk2 GTI Resto Project One Step Closer
Golf mk2 2 0 16V Project Freebie NEW Seats and NEW Look...
มุมมอง 2K10 หลายเดือนก่อน
Golf mk2 2 0 16V Project Freebie NEW Seats and NEW Look...
Wiring day and night, Golf mk2 GTI CE1 to CE
มุมมอง 3.2Kปีที่แล้ว
Wiring day and night, Golf mk2 GTI CE1 to CE
Golf mk2 GTI Time to drop the motor in Project Joker
มุมมอง 1.7Kปีที่แล้ว
Golf mk2 GTI Time to drop the motor in Project Joker
Hello, thanks for the info. May the release bearing cause the clutch to not disingage properly? Ive been having headaches for weeks trying to find the issue. The clutch is fairly new
Seriously awesome
Thank you👍🏼
Muito curioso!!!!! 🎉
Lets see what happens
Hello, I have a golf mk2 kr with an ABF engine and I have problems with the dealer, how exactly were you able to make it perfect, thank you
Hello, I need more information, what is your problems?
Traducir texto con tu cámara Hello, thank you for responding, my problem is that the delco of my KR is not related to the ABF engine because the stroke is too long and I have no way of getting it ready for maximum performance. I see that you name a device for the distributor. That solves this problem, thank you.
It does not relate to the ignition timing because it is different and I see that you manage to fix that problem
I just swapped my clutch and now gearbox runs all the time unless i push clutch on the floor, is this a sign on this bearing breaking or did i do something wrong
Sorry I don't understand "gearbox runs"?
@@RestoDesignsnando sorry, what i mean is, even when i dont have a gear on, cv flanges keep spinning. I have not yet installed axles just in case i need to take it apart again
@@johannesperkio1829 ok that is normal. that's just the friction of the gearbox oil. Put the shafts on. 👍🏼
Nice job bro!! Did you need to reprogram the climate control? I didn’t understand the last step
Thank yous, no you'll need to turn on the cruise control in the ECU.
Looks backwards. Wrong side of road. Driver in passanger seat. Lol
Nice video! In the rear back seats, did you car have a lower backseat bracket? Mines doesnt have, not sure how you solve this. I guess you welded it, right? Thank you!
Thanks, the rear seats are Golf mk2 60/40 split, if you are going to use the rear seats from the Golf mk3 then yes you will need to find a way to fix the centre bracket to hold the seats. I would drill holds are use m8 rivnuts.
I got a glove box to put in my cabrio that didn’t come with a glove box but I can’t seem to get it to fit
It should just be 'plug n play' they have 3 hooks at the top which need to go in at an angle to hold the upper bit.
Hi, great vid. Do you have the part number for the top radiator cover at all please?
Interesting content! I m currently restoring a 4 door MK2 GTI type 19, I got every piece to its original state. I had a problem sourcing door cards and decent seats, so I decided to restore its recaro seats and door cards and put on black leather upholstery instead of textile. Do you think that it will lose its authenticity as a classic with that leather interior ??
Hi,did you also replace the half axles with golf 3 ones?aren't they longer than the golf 2 axles?
Thank you for video.
Great eye and job well done 👍💪
Thank you so much 👍🏼
Very informative, my 1.9 pd has recently started coughing out blue/grey smoke on start up and the fumes coming from exhaust smell slightly oily even when the smoke clears (it’s there for about 30 seconds 💨 and doesn’t show any as I’m driving). I’ve read on forums, injector seals, tandem pump, turbo bearing seals. I’ve just dipped my oil (changed 3 weeks ago) and yep, it stinks of diesel 😞. In your opinion would this point more towards the seals than T pump ? The oil level hasn’t risen, it just smells. 1.9 ATD PD 2003, 118k miles. Thank you 🤙🏼🤙🏼 Edit…. Thankfully I have a place near me called “Just German Parts”, they do Febi etc.
Hi man please can you give me some contact i need help?
Hi dude, you can contact me on here👍🏼
@@RestoDesignsnando okey so i bought a mfa speedometer and im on old installation golf so what changes do i need to do to connect all that like fuel and that info sorry for bad english its not my native language
@@RestoDesignsnando i found mfa switch but idk how to connect cables with old installation
@@RestoDesignsnando but besides that first i want to connect a cabble from alternator to rev counter how i can do it and witch wire on the jack is the for revs?
@@RestoDesignsnando if i cant make it show the fuel and that stuff i dont care i just need to connect rev counter its 1.6 petrol
You never showed how to do the other 2 seals?
Hi where do u buy led
There is a link in the description
Ever considered doing the 1.4 tsi (turbo and supercharged) swap?
Would love that, even just the Polo 6N 100hp 1.4 16v, but here it needs to look as close OE as possible. It's this or the Polo 1.6 8V motor.
Where did you get the extended hub bolts from? Standard is 10x32 so guessing it would be 10x42 for use with this plate?
Got them off eBay m10x45 12:9
@@RestoDesignsnandothanks! And did you buy the hub with the ABS ring fitted already?
intercooler oil coller is better than the water one.
There is also a 1.4 16v in the polo 6n and it has if a remember correctly 101hp. Now i know why you are putting back the original engine but it would have been interesting for sure to put that 1.4 in there. Keep up the good work.👍
Thanks, yes I think it's engine code is AFH, great little motor so I've heard, driven a few, revs well, only issue is it looks too modern. This engine is a 1.4 ABD 8V from the mk3, it should hopefully see 100hp.
Sometimes you have to go the clever way, I have sold my mk2 TDI, also because here in Denmark you have to pay a registration tax over again for the car, I it will be around 2k, so I have decided to bring my edition one 16v on the road again next summer, the benefits of waiting to next year is the car will be 35 years and I will only pay 1/4 in road tax and insurance. Anyway good luck with your project 😊
Yep in some parts of the world we have it very hard, thank you for you comment👍🏼 and you have an edition one 16V! that is amazing.
Left on a knife edge...to be continued😂...she's gonna need g60 brakes up front👍lookin foward to this build...the intake is a nice addition with the cam
Thank you, it's something a little different, I really loved the handling when the little underpowered 1.3 was in the car, hopefully this 100hp 1.4 will be a rev happy motor with character.
PS the car as it stands, all poly bushed, rear discs and rear Eibach arb, Koni yellows, full mk3 4x100 front wide track, subframe and 256mm brakes.
Good luck with the new project! 👍
Thank you.
❤🏴
How do we get the B and C pillars off? I really don't want to take off bottom panels to clear seat belt buckles.
hi, you make great videos! I'm busy with a 20vt swap myself. what intercooler did you use?
I have a 1995 mk3 cabrio . What exactly is needed to change it to 5 lug front and back
Everything shown in pt1 of this video and this video.
What steps are different for the 16v 2.0 ABF GTi engine?
The selector cables, the clutch slave cylinder, speedo wiring plug, and the angle to remove the gearbox due to the bigger flywheel.
What angle does it need to be as I’m struggling to get the gearbox off
@@BrandonhamonHD you need drop the engine slightly then with the gearbox loose, clock the gearbox anti clock wise.
Hi you mentioned in the video that you were going to be selling the chips is that still going to happen? if not can you recommend one, keep up the good work Cheers Tony
Ich habe mein ❤️an dieses Auto verloren.
Nice work!
Thanks!
I have qwestion does damage if we wash all engine or not i own AfN tdi inj pump
Hello and good evening to you, are you please be so kind to let know know what BV43 Turbo that was. Could you get me the part number of it so that I could search and get the right one please. Cheers
One of the best cars ever built. You must’ve gotten a lemon.
More than likely, loads of owners and mileage doesn't help.
Are these steps the exact same for a 96 2 liter GTi?
yep as the 8V GTI has the same 020 gearbox.
Dali je potrebno dizne poslije servisa vratiti kako su bile ili je bitan redoslijed
please tell me what is the number of the green cover
Here you go 020 141 073 A
@@RestoDesignsnando Thank you 🤝👍
Thank you so much, I almost have the transmission out. When replacing the rear main seal, do you have to pre-lubricate it? I have the elring replacement seal for the engine. I also was wondering if the input shaft seals are worth replacing. The larger black one behind the splines of the input shaft.
Yes 100% once the gearbox is out for the low price of them replace both those gearbox input shaft seals. I never have lubed the rear main seal. But doesn't main you can't.
Great tutorial on the cluster wiring
Thank you!
Great teacher 👌
Thank you
Do you take on jobs doing these conversions on mk2's? Im looking to buy a 20vt conversion when I move house next year but there are not many garages locally who would carry out this kind of work. Nice to see these kind of expertise still exist.
Thank you for your comment, unfortunately I'm based in Central Portugal( I take it you're from the UK?) and I'm also fully booked up till early 2025.
@@RestoDesignsnando yeah I'm in the UK. I'm not suprised your busy fair play. Enjoy the sun 👍
Even with a new injector you can pull the spring and plunger out don’t think that was your problem
I strongly recommend that you consider putting in some Wall Control pegboards in your alcove area. They are super strong and you could do full wall height and create lots of storage flexibility including shelves so store your parts and materials.
So it is just plug and play I don’t have to change anything ?
Nice video. I have Audi 100 ACE
That is a very cool car 👍