love what you do man keep it up! funny to see the Abs works plug and play mine just refuses to work . i think some ECu's are hard coded to a engine ECU and refuse to work if not found
Hi, doesn’t it just need a 12v constant and 12v trigger signal same as dsg transmission to enable it ? I’m in middle of an engine swap and thinking of ways to remove the bcm completely
Great job bro, congrats! I have an ABS mark20 also installed on my Golf 3 tdi with 288mm discs at the front, but the ABS light lamp is from the previous generation Teves mark04, it has only 2 pins to X4 (sw/ge) and X8 (ge/ro), the light only lights on only when connected to vcds, but with the ignition on, no way. Should I source a 4 pins ABS light lamp from a mark20?
I was thinking this would be a retro fit kida thing for some time. Im guessing with a little bit of fettling the system from the 6N/2 Polo will fit seeing as its a Mk2 Golf cross bred with a Mk4
Hello good job , i have a seat ibiza 6k which is similar to a mk3 golf can i add sensors to the seat belts and a bulb where it should be on the cluster to light up when you dont wear the seat belt and turn off when you do ? And also how do i add heated seats ?
hi, the seat belt light/sensors from the mk3 is a North America thing, I don't see why you shouldn't be able to get it to work on your 6k, you'll need the full seat belt system wiring and relay, heated seat is easy, you'll need to find a 6k or 6N heated switch, the wiring loom is the same as the mk3 one, so loads for sale(even on my site) plus the relays that are under each seat and then get seat heater elements.
Can you please help me with ABS light on on mk3 golf. I run diagnostic, and it says front left speed sensor (intermittent and another code permanent) 00283. I tryed 2 different new abs sensors, and light still on (but not always, only sometimes). I tryed to grind abs semsor to make air gap to abs ring smaller, but now abs light is always on. I cleaned aba ring, and checked wires to abs module, everything fine. What else can I try?
Nice to see that your not using that horrible teves system that you can't get parts for. Could you sell me a complete kit so that I can upgrade my rallye
No it's cool mate, they are Golf mk3.5 heated colour concept Recaros which have been retrimmed in 'new old stock' cloth to match the rear seats.th-cam.com/video/WaIDSLdtPxI/w-d-xo.html jump to 10:15 👍🏼
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Very nice job🎉 Now waiting for tempomat (cruise control) retrofitting from passat b3 or etc..
Thanks a lot👍🏼
love what you do man keep it up! funny to see the Abs works plug and play mine just refuses to work . i think some ECu's are hard coded to a engine ECU and refuse to work if not found
Thanks! Maybe because this one is from an early Passat B3 🤔 I was lucky.
Hi, doesn’t it just need a 12v constant and 12v trigger signal same as dsg transmission to enable it ? I’m in middle of an engine swap and thinking of ways to remove the bcm completely
Great job bro, congrats! I have an ABS mark20 also installed on my Golf 3 tdi with 288mm discs at the front, but the ABS light lamp is from the previous generation Teves mark04, it has only 2 pins to X4 (sw/ge) and X8 (ge/ro), the light only lights on only when connected to vcds, but with the ignition on, no way. Should I source a 4 pins ABS light lamp from a mark20?
I was thinking this would be a retro fit kida thing for some time. Im guessing with a little bit of fettling the system from the 6N/2 Polo will fit seeing as its a Mk2 Golf cross bred with a Mk4
Good video! What terminal tool are you using please?
Thanks, its a "LASER" terminal Tool 3932
Hello good job , i have a seat ibiza 6k which is similar to a mk3 golf can i add sensors to the seat belts and a bulb where it should be on the cluster to light up when you dont wear the seat belt and turn off when you do ? And also how do i add heated seats ?
hi, the seat belt light/sensors from the mk3 is a North America thing, I don't see why you shouldn't be able to get it to work on your 6k, you'll need the full seat belt system wiring and relay, heated seat is easy, you'll need to find a 6k or 6N heated switch, the wiring loom is the same as the mk3 one, so loads for sale(even on my site) plus the relays that are under each seat and then get seat heater elements.
Diagram of X plug to Passat ind and to Mk2 indicator would be nice.
very nice job and thanks for info. is there duty I have to pay on item arrival if I order something to be delivered in France?
I am based in Portugal, so no duty👍🏼 only import tax to the UK and US.
@@RestoDesignsnando thanks!
Hi does this work for regular golfs like 90 91 92 cl/GL 1.8 (RP engine)
Can you please help me with ABS light on on mk3 golf. I run diagnostic, and it says front left speed sensor (intermittent and another code permanent) 00283. I tryed 2 different new abs sensors, and light still on (but not always, only sometimes). I tryed to grind abs semsor to make air gap to abs ring smaller, but now abs light is always on. I cleaned aba ring, and checked wires to abs module, everything fine. What else can I try?
Where did you get the pinout from
a2 resources.com
Can you sell me that Non-abs setup?
Hi there, you can message me on my site, www.restodesigns.com/services
Nice to see that your not using that horrible teves system that you can't get parts for. Could you sell me a complete kit so that I can upgrade my rallye
Yep this system is better than those early setups. Message me thought my site restodesigns.com 👍🏼
Esse ABS é de qual carro??
Paasat B3
@@RestoDesignsnando thanks
Wow this is cool
Thank you 👍🏼
No hate mate but those seats arent recaros
No it's cool mate, they are Golf mk3.5 heated colour concept Recaros which have been retrimmed in 'new old stock' cloth to match the rear seats.th-cam.com/video/WaIDSLdtPxI/w-d-xo.html jump to 10:15 👍🏼
@@RestoDesignsnando oh yea they are recaro. Couldn’t see the side bolsters properly
@@xprayforapugx851 A lot of people miss them due to the retrim. Thanks for watching 🙏🏼
@@RestoDesignsnando thanks to you for uploading✌🏼