วีดีโอ

I have my K80 running on a Gigabyte B550 with a cheap Asus GTX 1050 video card just for the display... I put 3 Noctua fans onto the K80, runs OK!

All phone can work with cellular conected with Xlink bluetooth 2

thank you much, Although if you might have any thoughts on the following: I am having issues where despite wiring 1 pin of each R,G,B So 1 on GP0, 1 on GP6, etc And the only color I get is red, any thoughts? Im thinking its triggering every other pin but the ones I have wired up, but not even the test pattern shows more than just Red (and black)

very very great I am trying to make this

The color of the Bat Phone was inspired by the US military use of color coded phones during the Cold War. Using a red phone without proper security clearance could get you court martialed.

it doesnt work for me for some reason. flashed multiple uf2s my monitor isnt even detecting a cable being plugged in

What is the purpose of this device ? I just acquired one, possible in error !!

Or you could just get a regular telephone line, so you’re not dependent on the internet.

Got a set of K80s to assist me with 3D rendering - I got my PC to boot up with it detected by the system, but the problem I am facing now is my PC will NOT allow me to install the latest driver for my RTX 3090 AND the k80 together, and even if I get the 3090 drivers back up running, the k80 drivers automatically install, and I'm stuck in this perpetual loop of having to reinstall the drivers for my 3090. What must be done?

might rig something similar for something similar

Some great content here. Hwvr, the setup_default_uart() tip no longer seems to work: pico_stdlib/stdlib.c:110: undefined reference to `stdio_uart_init' Has the pico lib changed since you looked this?

Amazing video, you just killed any second thoughts I had on doing the same on a remote desktop for myself

I need this but then 2+2+2 bit for 64 colours, and the 7th bit for SYNC, and then 320x240 on PAL 50i.

From the GPU, why does it split x1 8 pin -> x2 8 pin, but then, x2 8 pin -> x1 8 pin? A clarificaiton would be appreciated. How is it connected (in detail) from power supply to GPU?

Would this card be good for AI training applications?

This thing is so slow in Arduino mode. Slower than Arduino nano. I am deeply disappointed.

What model computer and operating system do you use, that have the proper wiring, I would like to have a computer that can run this Tesla K80

I used a riser like yours and my card started sparking on boot and no longer works, so be careful about that

Wow! $100!!

Cool! Well done!

Sir, could you please share all the names of the component that make up this dektop PC. The motherboard, the cpu, the case, etc? I have never built a PC, but am looking to build one for the Tesla K80 GPU, so this information would be very valuable for me, as you have had success with this setup.

I'm looking to build a dektop specifically to use this GPU, and the question of how many PCIes it should have has arisen. I was thinking maybe buying 2-4 GPUs. Your DIY solution increases the width of the GPU, does that mean, regardless of the number of PCIe x16 ports, a desktop PC can only have 1 nvidia tesla k80 gpu? Unless the cooling is done on the side instead of on top, thereby not increasing the width, and allowing more space between GPUs. But these GPUs are already pretty thick, so even if I did this, do you think you could stack 2-4 of these GPUs side by side on a motherboard that has the PCIe ports? Thanks for sharing your solution.

so it's probably a cruder PSU with less clean power if i had to guess out of my ass, hence the simpler design.

Imagine dying and this is the only option for calling 911 😭🤣🤣

Awesome easy

I have installed the original circuit of Boris in my phone Heraldo in Spain and it works fantastic! Great work. It is fantastic to make these old phones work again.

amazing demo

Hi, thanks for this great video. Can you please share beeb_1080p.uf2 and master_1080p.uf2 files ? I am struuggling to compile them.

Does this work with the Pimoroni Pico DV Demo Base?

Bit big to put in the pocket.

Is DVI.

how much oxi clean you use in that container?

Would this project also work using the Pimoroni Pico DV Demo Board instead of the VGA Demo Board?

this card trains ai to be a jet engine, and you hear it

It’s got a 300w TDP, I’m not sure this will quite cut it.

I know this video is old, but could I use this device to increase the frequency of ac? I see this is used for speakers, but to me it looks like I could use this for said reason

Very underrated channel about raspi-pico.

If anyone is coming to this video, I found I kept getting a blank display. But it was actually the wiring that was wrong. Based on the current code in the PicoDVI repo (going by the date of this comment), the wiring is: B+ GP12 B- GP13 CL+ GP14 CL- GP15 R+ GP16 R- GP17 G+ GP18 G- GP19 Assuming you're wiring up as the DIV_Sock is laid out (as per this video).

Could you make all those schematics as large as possible so we can read them on our tele wifi ,i dont know how you would get it to me

K80 have 2 eCPU on them so need 2 fans or 3 on them ... Also on you video that demo it's used CPU and not GPU ... not normal to get 70-80% cpu usage .

I realise this is a couple of years old now, but is it possible to play 16bit samples using pwm with this code?

how to increase font size for "dht logging" application ? can anyone please help?

how can we change font size for "dht logging" example?

Nice video thanks

I have HP Z440 workstation and Quadro K2200, want install Tesla K80 on this machine. plz help me what settings can does run Telsa K80 on my machine

I have a question for you man :-) so I want to hook up a m40 Tesla to my HP computer but I want to set the Tesla on the top of the computer not mount it inside and use one of those brackets you have to take out of the back of the tower so you can insert the card or the Tesla and just have the wires from the power supply the motherboard going out of that hole in the back of the computer now up to the top of the tower where the Tesla GPU is sitting. Okay now on to the real point would it be possible to 3D print a new fan housing for the m40 and k80 etc where you take all of those things off of the casing and expose the chips and whatever you were talking about and reverse the fans so that they are sucking air out of the GPU and blowing it straight up so it would be kind of heating my bedroom not just blowing hot ass air around inside the tower.?? What do you think about this Am I crazy and dumb I'm new and kind of dumb and a little crazy but what do you think about this idea

Hi Robin, I have got a K80 and ordered fans for it. I have a Dell Optiplex and can't enable above 4G decoding but I am running Windows 11. I know I will need external power to run this and will have to use a PCIe extension lead as the computer is only compatible with low profile GPUs. I am not worried about how fast things are processed - but it will need to work. Do you think it will be possible to run if I buy this extra kit?

why cant we just use 2x1ohm paraller 2x1ohm series 3x1ohm series 4x1ohm series 8x1ohm series it will be more in scale than try match these and have more than 1% error for 8k thats 8oms LOL 499ohm 1000ohm 2000ohm 4020ohm 8060 ohm

Hey, I am building a Raspberry Pico Gameboy Emulator, would this solution work for me? I am using Pico-GB from YouMakeTech

Thanks for posting this video... I would like to run LLM (LLama 2 model) on my local machine and looking for a way where a cluster of GPU can be built... I understand that the model would require at least 32GB on a single card to load the entire model in the memory... Could you please confirm how did you create a Arduino circuit board or is it available in the Amazon marketplace and what's the name of it?