วีดีโอ

You didn’t identify or specify enough on how to identify what t case model you have with the adhesive tag, I got a 07 nbs gmc sierra with a blown mp3023 t case, that I’ve been trying to look for another, but I’m having trouble identifying what model they are because I don’t know how to “decode” the adhesive identification tag numbers. Please help!

I have a 2002 Chevy Silverado HD 6.0. I just picked up a transfer case that has 261 HD I was wondering if that would work in mine truck

150,000 on my 2006 TJ 4.0.

what did we all learn here?

165,000 miles on mine behind a supercharged 3.6. Still holding up fine for now.

Great video, it helped educate me a lot, thanks. So here’s an issue that I’m just started having with this very same transmission. I have a 06 jeep wrangler that won’t shift to 2,4,and reverse. I think it’s going into 6 but basically it won’t go into any of the bottom gears on the shifter. Any idea what could be causing this? Thanks for your time.

00:14 At first, I started to worry about those splines.

I have a 2008 Chevy Silverado 2500hd manual shift transfer case needing to know where tag would be located

lol… mines hammered and that just saved me a whole lot of questions. Great video💪🏼

Thank you!! 👍🏻💪🏼😂

CAN I REMOVE MY TRANSFER CASE NP8 FROM MY 2007 CHEVY TAHOE FOREVER ? IF SO WHAT DO I NEED 1 HAVE 3 AND NEED TO USE THEM AS LIMOUSINES 4X4 NOT NEEDED

How do you remove just the cover I have taken all the bolts out all the wires off all the harness everything got it loose there's a half an inch Gap but will not pop off

Him leaning over the spinning output shaft made me tense up big time. Mannnnn shut the machine off before you lean over something like that! You’ll get a limb ripped off!!!

Im a highschool student taking the automotive service tech course and we are working on this sort of thing. We have a 241 c transfer case and I’ve narrowed it down to 1988-1999 Chevy, GMC or Dodge does the “C” in 241 c mean its chevy specifically?

My transfer case in my 2010 GMC has been ok. Knock on wood. I am planning on servicing both front and read differentials and the transfer case with fresh AMSOIL fluids this weekend. I’ve never done this service prior, but it looks ridiculously easy and I was quoted $800 from a shop to use shop grade bulk fluids. No thanks. 😂😂😂

I see a T-Case rebuild in my future but a quick question. If only running in RWD, can I put the rebuild on a short delay and keep driving around as long as there is fluid? I have a small leak and am not sure how the previous owner took care of it. I replaced the input shaft seal and it stopped the majority of the leak already . Thanks!

Bro you have a job I wish I had 😮

I have trouble getting my jk 5 speed into 1st or 2nd. Sometimes it works just fine then all of a sudden it will go into any gear but 1st and 2nd. Any help would be appreciated greatly.

I have a 94 wrangler with the 4 cyl, when I got it the AX 5 trans sounded like it was grinding all the time, and no reverse. I found a "good deal" on an AX-15 so I ended up swapping that in using the Camaro clutch and the Dakota bell housing. It works, but goes clank clank clank in reverse which I assume is a missing tooth. I bought another "good deal" AX-15 for parts, but the shifter is locked up, so I'm going to try your tip, pop that plug out and see if I can move that gear around. If I'm able to shift it after that, I'll swap it into my YJ and see how it drives. Thanks for this

Thanks alot I really appreciate your help and the way you explain it to me , thank you so much

well, I spent around $6,500 parts and labor for a rebuilt NSG370, only to find out that my problem was likely in the Shift Tower (no OEM types available). The shift tower is NOT included as part of the transmission. Also - the shift lever adapter (fastens to shift tower) is no longer available (it was a lousy design with that rubber element).

I have a 2018 chevrolet traverse suv. How easy is it to service the transfer case if there's a leak? And what parts do I need to make it less likely to leak in the future?

Where r u located

How much for a new transfer case

My tags flat tag bolted to the back in the center. It stamped with"300596-20" and right below it is "945511" The case is casted "C18-15-24-2", What is this? My 1980 jeep j10 originally has a th400 automatic with a quadra trac. I want to get away from that so I'm wondering if I can use this first mentioned tcase instead??

I JUST LOVE HOW HE REACHED OVER THAT SPINNING SHAFT. 😮🤪🤯🤕

Were these ever used in a 2 wheel drive? I'd like to not buy then sacrifice a transfer case to make that happen.

What code on case or on white tag is a NP8

Are you builder 9094 cause that guy🤦‍♂️🤦‍♂️🤦‍♂️Cause he sent me wrong trans then sent me out another one and that replacement had metal shavings in it🤦‍♂️🤦‍♂️

Can I get a price on a AX15 conversion kit. I have the crappy transmission.

No offense but transmission dynos are boring

My 4th gear is gone after 20 years of floating. 1st 2nd 3rd 5th still ok

I rebuilt the NP246 on my 2007 Tahoe 5 years ago, about 25,000 Km since. At the time, I replaced the rear case half and installed the case saver. The problem I am experiencing now is the clutch is NOT slipping at all. When in 4wd, the front and rear are locked together pretty tight. Serious tire scrubbing when turning and I can really hear the front diff complaining from the gear train straining. What can I do to get the clutch to loosen up? What can I pour in there to encourage some slip? Yes, it has and always had blue autotrakII in it.

Good video very informative, easy to understand .

I have a 95 yj it hard going in 2nd

What about total loss of 5 and slight lose on 6th gear but all other gears are fine?

Does 243c have this issue?

Safety first let's have some guards around those rotating components

What the chances my 2001 gmc sierra won’t move because of the transfer case it shot ? It had no fluids so I refilled it but now my truck won’t move untill it hits almost 2500 rpm’s in drive or reverse.

Can I drive it without the front drive shaft attached? 03 Yukon 4x4 is the vehicle don’t have the money for a transfer case as this is my daily any temp fix?

Good Info!!!

What would make my truck when I accelerate it Slams on the brakes I've never ran into this problem

Okay I have a 1993 four-wheel drive Chevy Suburban I like when I go down the road when I accelerate my truck just Slams on the brakes all by itself what would that be transfer case rear end

What fluid goes in it ?

I have a silver rado 11 can't find identification

Also have some rattling sounds coming from the trans when idling in neutral. Pushing in the clutch makes it go away, sometimes pumping it a few times repeatedly and it’ll go away. Always figured it was the cage but now that I’m thinking about it is this likely clutch related and not trans?

My first gear used to slip out, put in amsoil and the issue went away. Why do you think this happened? Do I likely have rounded teeth on my first gear? Or do you think it was just shifter issues? I was debating on doing the b&m shifter upgrade to reduce all the slop in the shifter.

Best tutorial I've seen! Thanks man!

These transfer cases have more problems than just magnesium peckers internally. They are crap!!

These things were the worst junk. Had an 88 jeep with this pile of shit. Stripped out the reverse gears because the reverse idler didn’t mesh properly. Finally threw it away and swapped in an AX-15.