Welfare Wagon Repairs
Welfare Wagon Repairs
  • 28
  • 173 470
Eufy S1 Pro Robot Vacuum + Mop Unboxing & Technical Overview
Unboxing the Eufy S1 Pro and discussing how the revolutionary Mopping and Vacuuming mechanisms work.
Overall I am pleased with the way the robot functions and am only slightly disappointed with the noise output and with the risk averse navigation logic that prevents the vacuum from operating in reverse to mop tight spaces.
มุมมอง: 426

วีดีโอ

Keurig K-Supreme Plus No Power Fix (Thermal Fuse Reset) & Teardown
มุมมอง 8K6 หลายเดือนก่อน
The thermal fuse tripped on my Keurig k-Supreme plus as the water reservoir was removed while the machine was running causing the heating element to overheat and trip the thermal fuse. In this video we will reset that thermal fuse and briefly discuss the engineering behind how the machine works.
Eufy RoboVac Teardown, Deep Clean, and Side Brush Replacement
มุมมอง 6Kปีที่แล้ว
Side brush motor shown in video: ca.eufy.com/products/t2108111-90 Editors note: in the video it's mentioned that the bumper also has IR sensor(s). I have not confirmed this.
No Tools Needed: Oil Change With The Dorman Twist Drain
มุมมอง 1.9Kปีที่แล้ว
Dorman Twist Drain Review & Installation: th-cam.com/video/IWAuymY7hJ8/w-d-xo.html The vehicle in the video is a 2015 Mitsubishi Mirage
BlueDriver Bluetooth OBD2 Scan Tool Unboxing & Review
มุมมอง 910ปีที่แล้ว
With so many click bait videos on this device I figure I would check it out. Wikipedia OBD II PID code list: en.wikipedia.org/wiki/OBD-II_PIDs Bluedriver smog check instructions: support.bluedriver.com/support/solutions/articles/43000582817-how-to-run-a-smog-check California Air Resource Board OBD II Fact Sheet: ww2.arb.ca.gov/resources/fact-sheets/board-diagnostic-ii-obd-ii-systems-fact-sheet
Mitsubishi Mirage Battery Replacement
มุมมอง 2.8Kปีที่แล้ว
- The battery replacement starts at 4:20 - Here is a tutorial on how to modify the battery box to fit a physically larger battery: mirageforum.com/forum/showthread.php/6909 - Thanks for watching, please leave a comment below if you have any feedback.
2015 Macbook Pro Battery Replacement
มุมมอง 584ปีที่แล้ว
Replacing the A1618 battery in my 2015 Apple MacBook Pro 15" Retina A1398. IFixit guide (steps 6-48 were skipped): www.ifixit.com/Guide/MacBook Pro 15-Inch Retina Display Mid 2015 Battery Replacement/89284 Where I bought the battery (Not an affiliate link): www.aliexpress.com/item/1005003218989798.html
Complete Loss Of Brakes - Mitsubishi Mirage
มุมมอง 4.5Kปีที่แล้ว
Here is my video explaining how the drum brakes on the Mirage works: th-cam.com/video/xAOjB4tZkq8/w-d-xo.html Here are links to other people who have issues trying to get aftermarket shoes to fit: - mirageforum.com/forum/showthread.php/4820-Trouble-with-rear-brake-drums-(can-t-get-drum-back-on-after-changing-brake-shoes)?p=109849&viewfull=1#post109849 - mirageforum.com/forum/showthread.php/6203...
ASMR Trunk Cleaning (No Talking) - Mitsubishi Mirage
มุมมอง 521ปีที่แล้ว
An ASMR video on me cleaning my trunk, I do not know what the fluid being cleaned up is as this mess was in the car before I bought it. Fun fact: The circular plug covered in what appears to be some sort of silicon sealant in the far left corner of the trunk is covering a hole that is used during the production of the vehicle to allow excess paint to drain out of the spare tire well. Another fu...
How Drum Brakes Work - Mitsubishi Mirage
มุมมอง 9Kปีที่แล้ว
A how to on how the drum brakes work. This tutorial covers everything from the auto adjuster to the parking brake. please leave any questions, comments, concerns or feedback below. I will not be providing a part number for the shoes shown in the video as they did not fit the Mirage.
Dorman Twist Drain Review and Installation
มุมมอง 14Kปีที่แล้ว
The vehicle shown in the video is a 2015 Mitsubishi Mirage, to learn how to jack the car up and how to change your own oil you can watch my video here: th-cam.com/video/1O5BCFaELVo/w-d-xo.html To see how the valve has held up over 9 months of use you can check out this video: th-cam.com/video/OuJOohNMoO8/w-d-xo.html To learn why you should use the crowfoot wrench at an angle of 90 degrees(perpe...
Mitsubishi Mirage - Brake Light Bulb Replacement
มุมมอง 12Kปีที่แล้ว
The bulb shown in the video is a Philips "brake light bulb" Part number: P215WLL. It is a P21/5W bulb, its name is derived from the wattage of its two filaments. The brake filament is 21W and the parking filament is 5W. This bulb is also referred to as 1157. What's also interesting to note is the single filament (brake light only) bulb the 1156 has the two side pins at the same height as it is ...
Mitsubishi Mirage - Front & Rear Wiper Blade Replacement
มุมมอง 6Kปีที่แล้ว
Rear Wiper: Trico 55121 12 inch Front Wipers: Trico 32240 24 inch Trico 32160 16 inch
Garmin Dash Cam Mini 2 - Lowlight test footage
มุมมอง 2.3K2 ปีที่แล้ว
Driving down Bathurst street from Toronto to Newmarket. I recommend you watch the video in 1080p
Mitsubishi Mirage - The hiding spot you didn't know about
มุมมอง 7K2 ปีที่แล้ว
Mitsubishi Mirage - The hiding spot you didn't know about
Choosing and Hardwiring a Dash Camera - Garmin Dash Cam Mini 2
มุมมอง 1.8K2 ปีที่แล้ว
Choosing and Hardwiring a Dash Camera - Garmin Dash Cam Mini 2
Mitsubishi Mirage - New Stereo With Wireless CarPlay
มุมมอง 15K2 ปีที่แล้ว
Mitsubishi Mirage - New Stereo With Wireless CarPlay
Mitsubishi Mirage - Fender Turn Signal LED Upgrade
มุมมอง 2.3K2 ปีที่แล้ว
Mitsubishi Mirage - Fender Turn Signal LED Upgrade
Mitsubishi Mirage License Plate Light Replacement
มุมมอง 3.2K2 ปีที่แล้ว
Mitsubishi Mirage License Plate Light Replacement
Mitsubishi Mirage Dome Light Replacement
มุมมอง 4.1K2 ปีที่แล้ว
Mitsubishi Mirage Dome Light Replacement
Mitsubishi mirage - Luggage Compartment Light Replacement
มุมมอง 3.1K2 ปีที่แล้ว
Mitsubishi mirage - Luggage Compartment Light Replacement
Mitsubishi Mirage Coolant Check and Change
มุมมอง 10K2 ปีที่แล้ว
Mitsubishi Mirage Coolant Check and Change
Mitsubishi Mirage Oil Change
มุมมอง 24K2 ปีที่แล้ว
Mitsubishi Mirage Oil Change
Mitsubishi Mirage LED headlight install
มุมมอง 3.7K2 ปีที่แล้ว
Mitsubishi Mirage LED headlight install
Mitsubishi Mirage Transmission Fluid & Filter Change
มุมมอง 19K2 ปีที่แล้ว
Mitsubishi Mirage Transmission Fluid & Filter Change
Mitsubishi Mirage Blower Motor Cleaning
มุมมอง 5K2 ปีที่แล้ว
Mitsubishi Mirage Blower Motor Cleaning
Mitsubishi Mirage Front Brake Pads & Rotors
มุมมอง 4.9K2 ปีที่แล้ว
Mitsubishi Mirage Front Brake Pads & Rotors

ความคิดเห็น

  • @jeyang3131
    @jeyang3131 3 ชั่วโมงที่ผ่านมา

    Had new brake shoes plus refaced but sound goten worst

  • @larrymcdonald5219
    @larrymcdonald5219 วันที่ผ่านมา

    In the time it takes you to disassemble and reassemble I could already just buy a new one 😂

    • @welfarewagonrepairs
      @welfarewagonrepairs 21 ชั่วโมงที่ผ่านมา

      That is true. I can also buy a car in the time it takes me to do an oil change. Unfortunately I do not make money as fast as I can spend it. Thank you for watching!

  • @anthonyvictoriano3048
    @anthonyvictoriano3048 วันที่ผ่านมา

    In-depth info and details if you don't want a bare bones breakdown on Mirage coolant changes... Could've learned more about covert wetworks techniques @ 0:40 though. 😅

  • @Zimmsters
    @Zimmsters 2 วันที่ผ่านมา

    Spare battery is available for purchase on Eufy website with included instruction video.

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 วันที่ผ่านมา

      The battery is replaceable. This video was released before eufy began to sell the battery. Unfortunately unlike on other eufy models the entire vacuum bottom needs to be removed to access it

  • @joonajks
    @joonajks 3 วันที่ผ่านมา

    Are you currently happy with that Dorman twist oil drain plug?

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 วันที่ผ่านมา

      I do not do much driving maybe a couple thousand km a year but so far this has never leaked so I would say it’s working ok. My only concerns are ground clearance and that the dirt at the bottom of the oil pan may not be coming out as this has threads that likely protrude into the pan and because I no longer jack the front of the car up when I change the oil.

    • @joonajks
      @joonajks 2 วันที่ผ่านมา

      @@welfarewagonrepairs OK thank you!

  • @AmigoSecular
    @AmigoSecular 5 วันที่ผ่านมา

    I have a g40 which is very similar to the one you show here, my step son ran it without the dust bin on and now I can hear little rocks inside the machine, do you think it will ruin the suction motor or should I try disassembling just like this?

    • @welfarewagonrepairs
      @welfarewagonrepairs 4 วันที่ผ่านมา

      I think it shouldn’t be a problem long term to keep using it with the rocks in it. If the sound bothers you. You can try pulling the exhaust filter out without disassembling the machine like I do in the video and shake the rocks out.

  • @insunreliable7875
    @insunreliable7875 11 วันที่ผ่านมา

    So does no one just make a plug and play adapter kit for these head unit swaps? I really don't want to cut into my factory wiring.

    • @welfarewagonrepairs
      @welfarewagonrepairs 11 วันที่ผ่านมา

      The one shown in the video is plug and play. No wires were cut, no soldering done

  • @phippscrossing
    @phippscrossing 12 วันที่ผ่านมา

    Thank you - this fixed my machine!! 😊

    • @welfarewagonrepairs
      @welfarewagonrepairs 11 วันที่ผ่านมา

      Glad to hear you found the video helpful. Thank you for watching

  • @cowlinli
    @cowlinli 12 วันที่ผ่านมา

    Thank you! I was able to fix my Keurig following your instructuin but I must say it was pretty tough to remove the outer wrap.

    • @welfarewagonrepairs
      @welfarewagonrepairs 11 วันที่ผ่านมา

      I agree, the machine is designed with cost and rapid assembly in mind and not for serviceability. Glad to hear you fixed your machine. Thank you for watching

  • @EqyanSaeed701
    @EqyanSaeed701 13 วันที่ผ่านมา

    I have my mirage imported from Japan my Coolant was green why was yours blue?

    • @welfarewagonrepairs
      @welfarewagonrepairs 11 วันที่ผ่านมา

      Blue is the OEM coolant color, you can see me add coolant I purchased directly from a Mitsubishi dealership near the end of the video.

    • @EqyanSaeed701
      @EqyanSaeed701 11 วันที่ผ่านมา

      @@welfarewagonrepairs I have mine Imported used Green Coolant I think green is Fine the Green was Also OEM it overheated the Red Temp light came on it was on water but Now I use the coolant that it was before on the car Green

  • @Schanyee2
    @Schanyee2 13 วันที่ผ่านมา

    From where do you get documents like the one you used at 10:00 ? I am new at doing repairs by myself but i want to do it more profesionally like you but i lack Documentation and very often i cant find parts for my car other than from shops like Autodoc and then they often dont have the parts i need ....

    • @welfarewagonrepairs
      @welfarewagonrepairs 11 วันที่ผ่านมา

      Go to mirageforum.com and search for “factory service manual”. Parts shown In the video are from Partsouq, Mitsubishi dealerships and Rockauto.

  • @aikz5
    @aikz5 13 วันที่ผ่านมา

    Brilliant video, love all the details.

  • @maryuaervaf4916
    @maryuaervaf4916 15 วันที่ผ่านมา

    Thank you! This is very helpful.

    • @welfarewagonrepairs
      @welfarewagonrepairs 15 วันที่ผ่านมา

      Glad to hear you found the video helpful. Thank you for taking the time to leave this comment.

  • @katarina6418
    @katarina6418 15 วันที่ผ่านมา

    do i need to do all those extra steps or can i just fill it up if it’s empty ?

    • @welfarewagonrepairs
      @welfarewagonrepairs 15 วันที่ผ่านมา

      You can fill the radiator all the way up and the overflow tank to the high line whenever it’s empty. Remember to only open the radiator cap if the engine has not been started for a few hours (is cold). Opening the radiator cap to fill may only be necessary if the car ran out of coolant at some point.

  • @Lil_Dickens
    @Lil_Dickens 19 วันที่ผ่านมา

    Thank you... solved the issue!

  • @AngelaWilliamsoncva
    @AngelaWilliamsoncva 25 วันที่ผ่านมา

    Thank you! This is what was wrong with my machine. So nice to fix it rather than toss out until it's really dead. One disassembled, so easy!

    • @welfarewagonrepairs
      @welfarewagonrepairs 24 วันที่ผ่านมา

      Glad to hear you found the video helpful. Thank you for watching!

  • @atleastmypalmsarewhite9960
    @atleastmypalmsarewhite9960 27 วันที่ผ่านมา

    Why do you say 4.35l.. Don't you mean 4.35 quarts?

    • @welfarewagonrepairs
      @welfarewagonrepairs 26 วันที่ผ่านมา

      The video says to use 3.2 litres in the bottom corner at 9:50 I have no idea where you get the 4.35 number from. I measured in litres as that is the unit the measuring cup I used provides. You can see in the video that 3.2 litres is exactly enough to bring the level up to the high mark.

  • @Wolf-hp1vh
    @Wolf-hp1vh หลายเดือนก่อน

    I took a bat to my k supreme plus. But good video may be useful next time as I will be purchasing my 3 keurig in 2 years

    • @welfarewagonrepairs
      @welfarewagonrepairs หลายเดือนก่อน

      😂😂😂 Thanks for taking the time to leave this comment!

  • @PongbyAtari
    @PongbyAtari หลายเดือนก่อน

    The reason this happens is when the water resavior isn't seated properly the machine will get hot in a matter of seconds and shut down. I can only imagine how many Keurigs have been scrapped that needed this simply fuse reset. Fantastic video thumbs up thank you 😅

    • @welfarewagonrepairs
      @welfarewagonrepairs หลายเดือนก่อน

      Thank you for watching. The machine in the video had its reservoir removed while it was brewing which caused the failure.

  • @2aminitials
    @2aminitials หลายเดือนก่อน

    The robot needs a couple coats of silver paint and a Mitsubishi emblem on the front of it to maximize cleaning power.

    • @welfarewagonrepairs
      @welfarewagonrepairs หลายเดือนก่อน

      A 10 year powertrain warranty would also be very confidence inspiring 😂

  • @claudiugabrieltrofin2334
    @claudiugabrieltrofin2334 หลายเดือนก่อน

    Can you tell me what size the oil filter is?

    • @welfarewagonrepairs
      @welfarewagonrepairs หลายเดือนก่อน

      In the video I install a Bosch 3323 oil filter from Rock auto, they are a great place to buy car parts from. I recommend googling around for a 5% discount code.

  • @manulucky027
    @manulucky027 หลายเดือนก่อน

    all of my lights are working well, except the plate lights. how to fix?

    • @welfarewagonrepairs
      @welfarewagonrepairs หลายเดือนก่อน

      The plate lights are wired to the parking light circuit(the dim rear brake and front orange and white lights that are always on when parking or headlights are switched on). Have you tried changing the bulbs? I would be surprised if all your parking lights worked but both plate lights had wiring problems.

    • @manulucky027
      @manulucky027 หลายเดือนก่อน

      @@welfarewagonrepairs yes i have change bulb to LED, i now know the problem. LED is not contacting well to the socket

  • @alexshatner3907
    @alexshatner3907 หลายเดือนก่อน

    How do you check your 12 Volt Battery charging system with the Blue driver? If anyone knows please respond

    • @welfarewagonrepairs
      @welfarewagonrepairs หลายเดือนก่อน

      You can turn on all the electrical loads like high beams, lights, fan, and see if the voltage drops below the range shown in the factory service manual

    • @alexshatner3907
      @alexshatner3907 หลายเดือนก่อน

      @@welfarewagonrepairs Yes but I was wanting to see the actual voltage on the screen like 13,8 Volts or 12.8 Volts etc

    • @welfarewagonrepairs
      @welfarewagonrepairs หลายเดือนก่อน

      Voltage is shown at 8:14 in the video within the graph

  • @fourbirdstos
    @fourbirdstos หลายเดือนก่อน

    Thank you for making this video. : )

  • @elcano9l52
    @elcano9l52 หลายเดือนก่อน

    I recently bought a brand new 2024 SE, and I immediately noticed that it had horrible long dry starts every next morning, the oil lamp would take a couple of seconds to turn off after starting and you could hear the dry rattle of the engine, just like when you start up with an empty filter after an oil change, and I live in tropical 90F+ climate. I discovered that the OE Mitsu filters don’t have an anti-drain back valve, what the heck? I pulled the factory filter off and yup! It doesn’t have one. I replaced it with a Champ Labs USA made filter (my favorite brand, they make filters OE and aftermarket filters for a bunch of brand names). Problem solved, now it starts up and builds pressure almost instantly. Thankfully mine was just 187 miles in 😂. What I’m still concerned is of that 0w-20 recommendation for all temps, I live in Puerto Rico, we get 120F+ heat indexes almost all year round… Why does the US spec Mirages get 0w-20 recommendation in the manual, when the rest of the world gets the multi grade/temp graph up to 10w-30? I’m pretty sure it is the exact same engine…

    • @welfarewagonrepairs
      @welfarewagonrepairs หลายเดือนก่อน

      Oil viscosity is likely chosen to meet fuel economy goals and takes into account the weather of the North American market. There’s a lot of discussion around oil viscosity and the different recommendations in different markets on Mirageforum.com I personally do not think that high ambient temperature will have a big impact on the recommend oil viscosity as the operating temperature of the engine is always much higher than ambient. I personally only use the oil viscosity recommended by the owners manual as I would like to keep my warranty valid. Thank you for watching!

  • @pieroluciano3272
    @pieroluciano3272 2 หลายเดือนก่อน

    Excellent! Thought this thermal fuse was a one time only! Cheers! 😎👍

    • @welfarewagonrepairs
      @welfarewagonrepairs หลายเดือนก่อน

      Glad I could help, Thanks for watching!

  • @The-BigWeebowski
    @The-BigWeebowski 2 หลายเดือนก่อน

    How do you get those diagrams and all that detailed info (like torque NM)

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      They are from the factory service manual. You can find one by searching for it on mirageforum.com

    • @The-BigWeebowski
      @The-BigWeebowski 7 วันที่ผ่านมา

      I got really busy last month but I wanted to come back and thank you!​@@welfarewagonrepairs

  • @ComeIntoTheOut
    @ComeIntoTheOut 2 หลายเดือนก่อน

    Thank you for this how to video! Same thing happened with mine. Followed your steps and reset the switch. Good as new!

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      Glad you found the video helpful. Thank you for taking the time to leave this comment.

  • @justingrobner8272
    @justingrobner8272 2 หลายเดือนก่อน

    And when the car is on the ground tighten the lug bolts to 90lbs torque BY HAND. You tire "techs" gotta stop using your air ratchet and you impact drivers to over tighten the lug nuts. I've never in my life snapped a lugbolt until I snapped 2 out of four after a tire "tech" mounted tires on my daughters car. You can also warp the rims when you over tighten the lugnuts, numbnuts. 90lbs on the ground by hand every tire every lugnut.

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      I recommend tightening the nuts while the car is in the air as the weight of the car may prevent the nuts from tightening

  • @kp7100
    @kp7100 2 หลายเดือนก่อน

    I have OEM Mitsu mirage LED floor lights. I need major help installing them since the instructions are not always so good. Make a video please lol

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      I appreciate the kind words. According to Mitsubishi’s US website the floor lighting is 152 USD, the Center console lighting is 84 USD. Unfortunately I cannot spend 200+ dollars to make a TH-cam video. I do not earn any income from TH-cam. I recommend leaving any installation questions you have on mirageforum.com Thank you for watching!

  • @jeffj6815
    @jeffj6815 2 หลายเดือนก่อน

    How the Hell did you install that filter from the top???

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      I am left handed which makes it much easier as there’s a radiator hose in the way if you try to use your right hand.

    • @jeffj6815
      @jeffj6815 2 หลายเดือนก่อน

      @@welfarewagonrepairs I managed to get mine attached from the top today!!! Lol. It's impossible to do it from underneath. You can't see what you're doing!!! Great videos!!!

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      @@jeffj6815 my Mirage is missing the black plastic piece on the bottom which makes replacing the filter from the bottom easy. Thanks for watching!

  • @KillinGroundz22
    @KillinGroundz22 2 หลายเดือนก่อน

    is it really necessary to remove the cylinder block drain plug or we can just refill a new coolant again after draining the radiator?

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      Only changing the radiator and reservoir fluid is definitely an option. Within the video I show how much fluid comes out of the engine drain plug to give you an idea of how much fluid you will be leaving within the engine.

  • @CadeBrazil
    @CadeBrazil 2 หลายเดือนก่อน

    Thank you for the video! Awesome instructions and great explanation of instructions.

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      I am delighted to hear you found the video helpful. Thank you for watching!

  • @Fahad-rm1im
    @Fahad-rm1im 2 หลายเดือนก่อน

    I have cabin filters with arrow mentioned on them... should filter be placed so tha arrow be upside down as mentioned on blower motor an upside arrow on it ???

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      Yes the arrow should be pointing down and the side with the larger surface area will be pointing up so there is more room to catch the dirty outside air that is sucked from above the filter down into the blower motor. This is discussed at 5:55 in the video.

  • @TibberAndFriends
    @TibberAndFriends 2 หลายเดือนก่อน

    Your hands must be tiny 😆 i cant even fit through the opening.

  • @crystalgulotto3838
    @crystalgulotto3838 2 หลายเดือนก่อน

    I appreciate the through explaining and thank you for your time

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      Glad to hear you enjoyed the video. Thank you for the kind words!

  • @doreennelson852
    @doreennelson852 2 หลายเดือนก่อน

    Wonderful video! Saved my machine from the scrap heap. Found I could reach in and reset the fuse without having to completely remove the outer wrap. Thankyou I am now going to enjoy a cup of coffee!

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      Glad to hear the video helped you fix your Keurig. Thank you for watching!

  • @davidschwarz1196
    @davidschwarz1196 2 หลายเดือนก่อน

    You should play "bound for the floor " in the background of your videos

    • @welfarewagonrepairs
      @welfarewagonrepairs 2 หลายเดือนก่อน

      I listed to the song and agree it would be appropriate 😂. Unfortunately it does not appear to be royalty free, TH-cam would likely give me a copyright strike if I used the song. Thank you for watching!

  • @torysticklee2133
    @torysticklee2133 3 หลายเดือนก่อน

    Thank you so much. I just finished resetting my coffee maker thanks to this video now i can enjoy my coffee and dont have to go buy a new maker

    • @welfarewagonrepairs
      @welfarewagonrepairs 3 หลายเดือนก่อน

      Glad you found the video helpful. Thank you for watching!

  • @MorreskiBear
    @MorreskiBear 3 หลายเดือนก่อน

    I change these bulbs so rarely it's always good videos like these exist to remind me what to do. My own "welfare wagon" just hit 300,000 kms last week. It's a pizza-delivering MACHINE.

    • @welfarewagonrepairs
      @welfarewagonrepairs 3 หลายเดือนก่อน

      Glad to hear you are enjoying your Mitsubishi Mirage. Thanks for watching!

  • @jarodsaucedo78
    @jarodsaucedo78 3 หลายเดือนก่อน

    You saved my butt man. A bunch of leaves fell in my blower! Thanks!

    • @welfarewagonrepairs
      @welfarewagonrepairs 3 หลายเดือนก่อน

      Glad you found the video helpful! Thanks for watching!

  • @CloudDog1113
    @CloudDog1113 3 หลายเดือนก่อน

    Thank you for showing this video I have a 2017 Mitsubishi Mirage G4 140 K miles

  • @abigaildunsmore5047
    @abigaildunsmore5047 4 หลายเดือนก่อน

    It was my first time replacing a bulb and this video made it so easy! I feel like a true mechanic lol

    • @welfarewagonrepairs
      @welfarewagonrepairs 4 หลายเดือนก่อน

      Glad to hear it went well! Thank you for watching!

  • @contactben
    @contactben 4 หลายเดือนก่อน

    Thanks for providing this video!

  • @AshAragam
    @AshAragam 4 หลายเดือนก่อน

    Awesome help; thank you for patiently walking us through the fix. Wonder why Kuerig doesn't provide a accessible reset button, it will save them a lot of money with the returns.

    • @welfarewagonrepairs
      @welfarewagonrepairs 4 หลายเดือนก่อน

      There are also automatically resetting fuses available. It’s likely setup like this to force users to disassemble and inspect the machine before resetting it. It’s also causes the machine to fail when the user does something inappropriate. For this particular machine the water reservoir was removed making the user feel at fault for its failure and more likely to replace it. If the reset button was accessible people could also try and leave something in the hole disabling the fuse. Thank you for watching!

  • @extralock1045
    @extralock1045 4 หลายเดือนก่อน

    Did you need to reset the CVT Degradation level?

    • @welfarewagonrepairs
      @welfarewagonrepairs 4 หลายเดือนก่อน

      I did not reset the degradation level. I am not sure if there is a benefit in doing so.

  • @artlovgren5045
    @artlovgren5045 4 หลายเดือนก่อน

    This guy is perfect! Knew all the answers to questions and hurdles i had as i watched it. Worked!! Ty so much!

    • @welfarewagonrepairs
      @welfarewagonrepairs 4 หลายเดือนก่อน

      Thank you for watching and taking the time to leave this comment!

  • @Gunner-qz9sh
    @Gunner-qz9sh 4 หลายเดือนก่อน

    Hey can anyone tell me what the voltage should be on my 2014 mirage O2 sensor bank1 sensor 1 . I have some very seems to be high voltage in the 2.3-4.5V range and I don’t know if this is normal for my vehicle or now it’s hard getting information from Mitsubishi. Any help would be great, if you felt like making a video with live data from the scanner looking at the o2 sensors that would be great also, cheers!

    • @welfarewagonrepairs
      @welfarewagonrepairs 4 หลายเดือนก่อน

      I have a video reviewing the blue driver obd2 scanner where I show some of the live data available. Do you currently have a check engine light/trouble code? What made you want to check the O2 sensor voltage? If you search on mirageforum.com you can find a factory service manual which might tell you what the appropriate voltage/diagnostic steps are

  • @mjeirio
    @mjeirio 4 หลายเดือนก่อน

    How is the reception of gps goes? Which you install it inside the dashboard panel. Thank you in advance for your reply.

    • @welfarewagonrepairs
      @welfarewagonrepairs 4 หลายเดือนก่อน

      I installed it where the factory one would go if I had the higher trim with the touch screen radio. It’s all plastic above it. GPS quality is not good. Using Waze the gps works much better but the phone also gets warm. I think they are using the phones gps in combination with the radio. Newer cars will use the can bus data for speed and steering position to help with gps. An aftermarket radio can never compete. The radio gps works fine as long as I don’t drive downtown. I would compare it to maybe a Samsung s4 from a decade ago.

    • @welfarewagonrepairs
      @welfarewagonrepairs 4 หลายเดือนก่อน

      Thank you for watching!

  • @Timiscool1321
    @Timiscool1321 4 หลายเดือนก่อน

    Hey man could you please tell me how tight you installed the pan bolts? I have the same pan gasket but it’s still leaking for me

    • @welfarewagonrepairs
      @welfarewagonrepairs 4 หลายเดือนก่อน

      5.9 newton meters it’s shown in the diagram at 9:57 in the video. It is not very tight. I was very scared of stripping the bolts as there is very little thread. Your problem is likely that the pan is either warped or that some sort of dirt is trapped between the pan and the transmission. My car didn’t even come with a gasket.

    • @Timiscool1321
      @Timiscool1321 4 หลายเดือนก่อน

      @@welfarewagonrepairs interesting, I also applied 5.9Nm and in the order it asked for. I’ll give it a clean and check the pan is straight. Thank you