![DotNetWorker](/img/default-banner.jpg)
- 33
- 364 233
DotNetWorker
เข้าร่วมเมื่อ 4 ม.ค. 2008
Foster Connector Conversion - Ghost Trap cable
My version of how to convert the Foster connectors into electrical connectors for Ghostbusters Ghost Trap Cable, using 2mm banana plug contacts and 3D printed inserts.
3D parts printed with 0.2mm nozzle and are very tight tolerance, sand or use glue if your printer prints them over or under sized.
Good idea to glue the male contact into the housing too with superglue. Mine all friction fit without glue. Be very careful not to glue the connector together, I did that in prototyping and couldn't get it apart again.
More details on thing page on thingiverse.
www.thingiverse.com/thing:5027197
maker.timwappat.info/ghostbusters-ghost-trap-using-raspberry-pi-pico/
3D parts printed with 0.2mm nozzle and are very tight tolerance, sand or use glue if your printer prints them over or under sized.
Good idea to glue the male contact into the housing too with superglue. Mine all friction fit without glue. Be very careful not to glue the connector together, I did that in prototyping and couldn't get it apart again.
More details on thing page on thingiverse.
www.thingiverse.com/thing:5027197
maker.timwappat.info/ghostbusters-ghost-trap-using-raspberry-pi-pico/
มุมมอง: 595
วีดีโอ
3D printed Ghost Trap and footpedal built with Raspberry Pi Pico & Circuit Python
มุมมอง 6812 ปีที่แล้ว
Using a Raspberry Pi Pico to bring the 3D printed ghost trap to life with Circuit Python Blog with more details here: maker.timwappat.info/ghostbusters-ghost-trap-using-raspberry-pi-pico/
ALDI So Crafty Sewing Machine - beeper modification
มุมมอง 9835 ปีที่แล้ว
The beeper in the So Crafty ALDI sewing machine is far, far too loud if you sew at midnight when the rest of your house is asleep. As with every stitch selection or length/width selection a beep penetrates the walls and ceilings of the house to annoy those that choose to try and sleep. I decided to tackle the problem or else it would curtail my midnight hobby. Taking the machine apart was not e...
ALDI So Crafty Digital Sewing Machine - Self Threading Needle
มุมมอง 2.7K5 ปีที่แล้ว
The ALDI sewing machine (like many others) has a self threading needle. There is a tiny hook that swings through the eye of the needle to catch the thread. The thread is then pulled through the eye in a loop automatically. However there is a problem in that is is very hit & miss. To show why I've zoomed right in on what is going on so you I and others can see how it works. You can see the probl...
ALDI So Crafty Digital Sewing Machine [1] - Getting started overview
มุมมอง 38K5 ปีที่แล้ว
Quick and rough video brain dumping what I know about the machine. This is a Medion MD15694 digital machine also known as; Medion MD15694 EASY® HOME MD 15694 Singer MC9200A Levivo NC1 Morse 2600A Goldstar 2600A Tuffsew 2600 Blaupunkt comfort 930 Eagle AE 2600A TecStar MD 15694 Necchi MP2600 Aldi So Crafty 2600A Acme 2600A Heureux Z6 Platinum Plus 200 Millepunti by Necchi Mp200 (original referen...
Fix Hoover HFI3012 dishwasher stops mid-cycle and beeping
มุมมอง 7K5 ปีที่แล้ว
Dishwasher was intermittently stopping mid-cycle, flashing the program LEDs and beeping. On restarting wash it would often work, or choosing another wash program would work. Having a good look at the machine, checking for blockages etc, my gut said it was the temperature sensor. The temp sensor (Dishwasher Ntc Thermostat 41022107) is located below the door at the front, behind a removable panel...
Megasaurus AZ State Fair
มุมมอง 6085 ปีที่แล้ว
Stands 3 Stories Tall Weighs Over 50,000 lbs. 15,000 lbs. Crushing Force In Each Claw 15,000 lbs. Biting Force His Heart Pumps 50 Gallons Per Minute Blood Pressure of 2500 lbs. Per Sq Inch Over 800 Feet of Veins and Arteries 30,000 lbs. of Lifting Force Over 200,000 BTU's of Burning Power www.megasaurus.com/megasaurus.html
Dynamics GP Extension for developing Dynamics GP Add ins
มุมมอง 5265 ปีที่แล้ว
There is a buggy search in visual studio, see how going back and forwards through the search results makes the extension eventually appear...
SG90 Servo ball release mech for makerfaire
มุมมอง 7226 ปีที่แล้ว
Allows a 11mm ball to be released one at a time 3D model can be downloaded here www.thingiverse.com/thing:2814842
Cylinder marble ball release mechanism 3D printed with Servo SG90 part 1
มุมมอง 1.5K6 ปีที่แล้ว
I needed to design a release mechanism for reliable release of balls one at a time. This is what I came up with. www.thingiverse.com/thing:2814842
Cylinder marble ball release mechanism 3D printed with Servo SG90 part 2
มุมมอง 1.9K6 ปีที่แล้ว
I needed to design a release mechanism for reliable release of balls one at a time. This is what I came up with. 3D files: www.thingiverse.com/thing:2814842
Opening a Samson Meteor Microphone to fix broken USB connector
มุมมอง 3.5K6 ปีที่แล้ว
Video support for fuller guide found here www.timwappat.info/codeitmakeit/post/Repair-Samson-Meteor-Microphone-PCB
Taking the daughter board out of the Samson Meteor Microphone
มุมมอง 2K6 ปีที่แล้ว
See full guide here: www.timwappat.info/codeitmakeit/post/Repair-Samson-Meteor-Microphone-PCB
Flickering Dynamics GP 2013R2 on Group Policy Update
มุมมอง 4408 ปีที่แล้ว
Flickering Dynamics GP 2013R2 on Group Policy Update
Manchester Mini-MakerFaire 2013 Time-lapse (full screen tablet view)
มุมมอง 6711 ปีที่แล้ว
Manchester Mini-MakerFaire 2013 Time-lapse (full screen tablet view)
Fix Indesit IDL40 Dishwasher Flashing Lights 1 and 3
มุมมอง 231K11 ปีที่แล้ว
Fix Indesit IDL40 Dishwasher Flashing Lights 1 and 3
Testing of Mumbo Jumbo Roller Coaster Flamingoland June 09
มุมมอง 1.8K15 ปีที่แล้ว
Testing of Mumbo Jumbo Roller Coaster Flamingoland June 09
Fix Indesit IDL40 Dishwasher Flashing lights 2 and 4
มุมมอง 68K15 ปีที่แล้ว
Fix Indesit IDL40 Dishwasher Flashing lights 2 and 4
Newcastle Gateshead Glowmobile parade New Year 2009
มุมมอง 14315 ปีที่แล้ว
Newcastle Gateshead Glowmobile parade New Year 2009
Ты дебил😂
Brilliant! These steps fixed my IDL40 dishwasher. I'm so grateful to you! And I'll be more diligent with cleaning my filters from now on.
It’s been 15 years, but you’re still saving us from expensive callouts! Thank you from New Zealand :)
Massive thanks to you. After wasting several days and initially dismissing your solution as too simple to be true, today I returned to it and voila, it worked. You saved me an unnecessary spend on a new dishwasher and also from wasting a reasonable fine dishwasher.
Thank you this worked thought i would have to buy a new dishwasher!!
awesome!
Might seem obvious to others but it just solved my issue. Had someone out recently who pulled out our dishwasher and when they put it back the clean water pipe got kinked and stopped drawing through water causing it to give lights 1 and 3 error. When I pulled the dishwasher out and no kinks ran fine so just taped pipe the wall to remove any risk of kinks and now runs perfectly.
After follow the tip, dishwasher (although was switched off) start making a pump noise and the water was pushed down until disapeared. Now it seems sounds like at normal cicle👍👍👍
key points your missing in the video and 3d file comments. what guage wire you using. also what size insulated dual wire your using. also the two different connectors to the female foster. name? product code? thread size?
Please, I need a help, I can't operate my machine, I bought it new but I find it so difficult to operate it.
Nothing saying how you find this area ,what tools are needed what is actually happening? Give us a clue
It is the lower front of the dishwasher between the front legs.
The best solution ever! Worked fine for me.
Another Christmas miracle, looking at the comments it appears I'm not the only one!
Thanks for posting - for a quick spur of the moment video - its sure helped a lot of people out.
hello. This is an awesome trap, and if i may ask, what electronics did it use, and if used any coding, what was it and where can I find it? also, how did you make the trap open, did you use any kit or did you use a mish mash of elcetronics.
Oh, i get it now. Thanks!
That's the 2nd time I have come back to this video in order to fix my Indesit Dishwasher🤣 (Memory is on the blink obviously !) Worked like a charm both times. Kudos to you. No faff video, tells you how to diagnose & fix with the minimum of frills or fuss. 5*****
Thanks - I'm astonished how a spur of the moment thought to video something, before it was as common to video this kind of thing has had some much attention for so long.
A 9 year old video saved my bacon, thank you :)
It's crazy when it was literally a spur of the moment, I'll just experiment with you tube and post this type moment.
Buddy. Had my IDL40 for over TEN years now! Had this problem. I almost went and spent £££ on a new dishwasher. This has it working like new!!! THANKYOU :)
Does she know how to get the feed dogs to work correctly. Mine do not come back up once theyve been put down for freehand embroidery and been switched over to the up position. Personally I think this is why Necchi got rid of their extra stock as it's a common problem in the Necchi MP200 but no one knows how to correct it
You just start sewing and they will pop up automatically, this is one of the most common questions on the facebook group, so you are not alone.
@@DotNetWorker but it doesn't! If it was that easy they would have popped back up when I started to try and sew. They've been stuck in the down position for ages now. It's a useless piece of rubbish and from what others have said, it's a common problem.
@@denisedavies3575 have you tried turning the hand wheel toward you rght after putting the feed dog switch back to "up"? That's the normal way to raise feed dogs up. Just a thought.
So, I'm looking to upgrade my ten year old ghost trap to something a bit more stable. what files did you use and any step by step build video? GBFans was too toxic for me, and left about 10 years ago. havn't looked bakc.
Hi. I used the www.thingiverse.com/thing:1394492 and the pedal is linked from there, for the print files. I used fidget spinners to get bearings for the wheels. I sourced the chains and sprockets for the doors in the UK. I used a Raspberry Pi Pico for the brain and MCPMCP23017 port expander to drive the LEDS. Used a standard 10 seg bar graph for the display, with my own custom bezel. I found an aquarium pump and ecig for the smoke, glycerine for the smoke. It uses standard USB power bank for power. Has a rotary encoder for the knob on the side. I did my own thing with the Foster connectors as none of the solutions I could see on you tube or forums were up to my standard, i wanted a good connection and it to be not as fragile as some of those solutions. You can see a video linked from my Thingiverse about all that, I was really happy with the result and found it very reliable in public. I made my own belt mount to allow the trap to sit very securely on my belt. The new movie has brought a new generation of kids costuming which is really nice. Any questions or help give me a message and I'll exchange details. I do this for fun and am not trying to be movie accurate and just want to enjoy the build, so no high drama. www.thingiverse.com/thing:5027197 www.thingiverse.com/thing:4916971 www.thingiverse.com/thing:4916963 www.thingiverse.com/thing:4911163 www.thingiverse.com/thing:4894960 www.thingiverse.com/thing:4897811
I just wanted to know how to thread the top as the manual is confusing. Its the only thing you didn't show which is surprising for a basics tutorial video. But thanks for showing the rest.
Yes! Couldnt find the solution anywhere else. Godsend, thanks!
Very nice !
Just opened mine, I will NEVER buy another Samson product ever again, I'm an electronics engineer working in the automotive industry, what I saw when I opened this device is utterly disgraceful.
your guide is a godsend this is exactly what i need there's no other place to find any of this info
If its like the Necchi mp200 it'll be crap. The Feed dogs won't when after a couple of times. I wasted money in the necchi one and wild but anything necchi ever again
Can you make the blipping stop or be quieter?
I had the same problem as I use it late at night when others are in bed, doing applique or lettering where changing stiches all the time was a problem due to the loud beep. I went in and did a hardware modification as shown in the video th-cam.com/video/j3Y21QCCYvE/w-d-xo.html but this would void your warranty and I really couldn't recommend it, unless you are used to taking consumer electronics apart as the case is tricky to spit open.
Amazing! The servo is controlled by arduino?
Can I make the letters bigger
No it's not a "proper" embroidery machine so you are stuck with the small letters.
Hola podría hacer un tutorial de como hacer ojales con esta máquina, no tengo manual de instrucciones y no se como hacerlo. Y como podría conseguir el Manual?. Gracias
Trying this right now, fingers crossed.
It worked, it worked my hands are so happy, my kid is sooo happy. Thank you.
Demonstration of the symptom would be informative don’t you think?
If you are still around- big shout-out saved us a lot of euros -thank you!
No worries - glad it helped
Thanks for video. I have just fixed my indesit dfg262. Thanks a lot!!!!
Hi, is this sewing machine good for sewing denim material? Thanks!
I find the position you put the thread arrester better and logical but the manual says the opposite way. Could this be a misprint?
Worked an absolue treat, Many thanks (wish I''d found video before stripping machine down!)
This is a good go to video but unfortunately completely missed how to thread the machine up.
Asking why does a tick appear on the screen and it doesn't work for me please help
I had an accident, it fell and the tripolsr cable it has (white, black and yellow cable) was disconnected. I don't know where it connects, could you send me how to connect it, thank you very much Juan Soria, Argentina.
Might've been an idea to sew something? I would've liked to hear it in action.
Will it also work if only the first one light shining rapidly?
Thank you. I just put a bottle of caustic soda and boiling water in two drainings and it appears to have sorted it. Thanks again
What was that ? Wow man! Well , thanks for sharing 0 knowledge
Hello Thank you for taking us through the machine. It helped me alot. However i need help with a problem that has occured. The upper thread has been stucking on the bobbin holder/ feeder, hence it can't sew. Can't even make a single stitch. The thread stucks and it shows Lo at the screen display. Thank you. Hope to hear from you soon.
Quick question....How much was this machine and is it still working well over a year after you posted this video?
Mine was £90 down from about £140 end of the lidl offer period. The source for the list was referenced below on the description.
@@DotNetWorker ...Thank you for the reply. I edited the comment before seeing your reply, but I also wanted to ask, how is the machine still working over a year after this video was posted?
It gets moderate use and has been oiled and cleaned regularly, quick and easy to do. Apart from tightening a screw in the bobbin holder, it's been fine. It's good value for money at this price but obviously isn't a Brother for example, just set your expectations appropriate to the price point.
@@DotNetWorker ...Ok, thanks for that.
I have the necchi mp200 which is the save machine and its a piece of crap. The Feed dogs crease to work so no good at all. Wouldn't touch one with a badge pole unless also customer service is better that Necchi
Thanks so much for this upload, dishwasher up and running now 👍👍👍
Your tutorial really helped me, thank you
Thank you so much for this!
I had this issue, filter had minimal debris. I had to remove the right side panel to reveal the pressure switch. Remove the pressure switch and blow the pipe. For good measure I flushed water using a hose pipe back through the pipe and into the main wash chamber. It dislodged some build gunk build up which was hidden in the lip of the sump. Once removed I reconnected the pipe to the pressure switch and the machine runs perfectly. The sludge/gunk was blocking the pressure pipe opening in the sump, this meant that the pressure switch was unable to detect the pressure difference once the machine started filling causing the fault code. 10 min job max and saves £££££