วีดีโอ

Muy bien video!, yo sigo buscando cómo controlar una tira led IC CCT, con wled 😢

1:58:00 they’re on your left side 😂

Fantastic video. Here is an extension to the API toggle command that I found useful: If you want to toggle to a specific color, you can use RGB values in the command. For example, if you want it to toggle red, the line is win&T=3&R=255&G=0&B=0

Hey mate, I built this and it is my best 3D printed project so far! Are you OK if I promote this build on my channel and link back to your video for viewers to get the printer files?

I noticed you are using a breadboard jumper for a data w a wagu connector. Do you find that combination to give a reliable data signal? I'm not sure if my setup in wled is causing a "glitching" or "spasm" kind of behavior or if my data pin connection is lacking

Great video. I'm wanting to program to momentarily light up individuall electronic drums. I have them installed and using wled. I was hoping to use the piezos used for sound to trigger the lights. Hi do I trigger multiple pins?

I don't know if it's the same in reality or if it's just in the video: The pixels look terrible, it would be better if there were no partitions for the pixels, and they merged a little at the edges, the fire effect is just pathetic, for many animations it's better to have the diffuser removed and no pixel separations.

Considering the level of frustration, that was a really fun night anyway!! Oddly, though when we got off Warzone I had a notification of an offensive chat warning which makes no sense because I had my mic set to party only, and had all the other last words/prox chat off. I thought party only means that even random teammates that we squad up with are not hooked up to chat, unless that has changed and now randoms get added to the party until they quit on us.🤷‍♂

Did you ever figure a way to show multiple animations... i.e. a playlist og playlists... :P

Does this design include enough space for a Esp32 board inside it?

Found this about the EN BUTTON….. On an ESP32 with a USB mini port, the "EN" button stands for "Enable" and essentially acts as a reset button, meaning pressing it will restart the ESP32 by momentarily cutting power to the chip, allowing you to reload code or reinitialize the device; it's essentially a way to trigger a power cycle without physically disconnecting and reconnecting power.

Great video! Very informative.

Why can I install SR version on any of my devices esp32 ? I tried esp32 s3 and after installation it never boots to interface or ask for WiFi

Zombies turned out to be quite a hoot once I started to have an inkling of wtf is going on--still have no idea how half the damn stuff in that game works even after playing all night!!

Hola si el color no es exacamente el que se muestra como se hace para corregirlo

Light-switch dimmer functionality? I've been trying to use WLED for the control of a single white LED driven with PWM and a MOSFET. Ideally, I'd like two buttons, high and low. Touch the high button (with light off) and the light comes on at 100% brightness, hold the high button and it dims from 100% to 0% in about 3 seconds, depending on when you release the button. Touch the low button (with the light off) and the light comes on at 2% brightness, hold the high button and it increases from 2% to 100% depending on when you release the button. Short press (0.5s) either high or low when the LED is on, toggles it off. Hold either high/low (with light on) and the light will dim/brighten until released. Most dimmer I have work similarly and you have to turn it on full or to the last unknown setting before dimming it, but sometime I don't want 100% first thing in the dark morning. I have a lot of ESP based dimmers running Tasmota but couldn't figure out a way to provide this functionality. I think this might be possible with API commands but haven't figure it out. Using a ESP32 with Touch buttons seems to work well enough, no need for physical buttons. Maybe overkill to use WLED but I use it for all other LED projects. Thanks for the video.

What are you using for powering this Matrix? I've bought everything, but only powering with a DC 5V 3A or a USB Piggytail seems not enough from the specification. In you design you go with a DC IN Plug, but what kind of power supply are you using? Are you powering it down via WLED software?

I am not much smart about these things but I like when people play with things like these. As I watched DIY Perks channel before and he used to replace backlight on the TV with some really powerul LEDs. What do you think could it be possible to combine multiple of these matrix panels and use them as a backlight for the TV?

Thanks for this! When I save, I keep getting Syntax Error: The string did not match the expected pattern. Any ideas what might be going on?

Thanks!

Thanks!

Jraphics Interchange Format is such a weird name. Better switch to animated pings.

How much to print me a couple of these?

Thanx, I was Searching for this video all along

Super!!!

Many thanks!!!

I bloody missed it.

Opening my 3D software try to make one, ok...wait, how about google first and landed here :)

is it possible to play gifs in a TFT ili9431 display instead of led matrix ?

@mybritishcomputerguy can other versions of ESP-32 be used? We can't seem to get our computer to recognize the device. Even after installing supposedly the correct drivers.

Do you need any heatsink plate on the back of led stripe? If yes, how could you join the sink and the stripe?

I think good idea button 3 level brightness white & other button for RGB thing for bed side lamp 3D printer. Bit hard setup make 3 level brightness off > 1 > 2 > 3 > off > 1 > 2 > 3 like my bed side lamp. I got crappy bed side lamps with 3 level brightness don't have RGB effects.

I did everything here (Great video Btw) but when I generate the Image, pretty much everything gets assigned white color, have tried different amount of frames and configurations, but same result, any idea? Thanks

Is there a way to override the current preset with a different preset as long as the button is pushed?

Nice work, I would like you to share the software code.

Hell yeah! No dubs though 😢

😂😮🤕💥

Fantastic!! Is it possible to control virtually those buttons using a smart switch on the wall?

where is the code for esp32?

So they say it can draw 15amps running all white, what about stringing multiple boards together? Would we need an even bigger power supply?

I was there

Yo

Yo

Gonzalez Kenneth Hall Elizabeth Hernandez Dorothy

Moore Dorothy Martinez Jason Robinson Karen

Excellent video and really helpful, keep it up! I have a question. I'd like to use a push button to control some SK6812 for desk backlight. Thanks to this video I can easily use the button to also toggle the leds on/off, I am trying to decide whether to also add a toggle switch that handles power for both the leds and the board. Should I just use a single button and keep the board running 24/7?

I use cheaper one panels with wled, its industrial panels with hub75 can order single panel 128*64 for 20 usd

just gotta invest in 3d printer, keep seeing cool things to print.

Fantastic video! Thank you so much for making it and breaking down the code meanings … you saved me from a lot of headaches just now. 😂

Jones Carol Rodriguez Shirley Martin Gary