Can you show the 1500 compound finish. Can't get me ball right since I mess with the cover DV8 Brutal collision. Wondering if once the surface is gone is it dead.
I have a brutal nightmare that it is a 500 rough buff. And I am curious do I do the normal process for 1500 /3000/p5000d trucut to get the 1500 grit polished finish.
So that is what i was doing wrong . Using too long and ALOT more pressure then needed . So use the conditioner and do 3 passes by hand with light pressure to the point it is barely touching the ball.
Awesome information! Will have to adjust!
Cool video talk tech bowling ball sanding ctd creating the difference dustin
Thank you for this informative video. Could you do something similar for TruCut pads by hand without a spinner?
why can't we purchase that mitt?
Can you show the 1500 compound finish. Can't get me ball right since I mess with the cover DV8 Brutal collision. Wondering if once the surface is gone is it dead.
I have a brutal nightmare that it is a 500 rough buff. And I am curious do I do the normal process for 1500 /3000/p5000d trucut to get the 1500 grit polished finish.
So that is what i was doing wrong . Using too long and ALOT more pressure then needed . So use the conditioner and do 3 passes by hand with light pressure to the point it is barely touching the ball.
Old guy logic.
There should be little or no difference between 1/3 HP, and 1/2 HP spinners.
Why 3 to 1 pass differential?
I was wondering the same thing... the 1/2 HP must turn more RPM. Only thing that would make sense.
@@ianhart8101 could be.
450 RPMs is 450 RPMs and 600 is 600. Does not matter how much HP the motor has. Just harder to stall the higher HP motor. @RUSure2449