Happy Graduation Day, Nic! Also next system test I dare you to pull the 2 pull stations in both buildings that are the closest to each other (yes, the shed and the shed under the deck count too). Just know your beloved viewers will NEVER unsubscribe. Your viewers love you and I do too! May all of your viewers like this comment. Like to make Nic happy on his graduation day! 👇
Congrats on the graduation man! I'm graduating tomorrow as well! Funny enough. This is definitely one of my favorite monthly test videos by far because of how in depth these testings were. I.e. the fire alarms, the emergency lighting, etc.
Happy Graduation from team Method! We're so proud of you. Amazing system test as always. Our manager wanted to add a comment along with this. "Very good! I love how in-depth you are along with your straightforwardness. Keep it up!"
Congratulations on graduating, Nic!!! I do have on idea that you should put the Carbon Monoxide portion of the Garage fire alarm system on Hazard Alert instead of supervisory. I don't know, just something to think about. Hey, I'll bet your coworker, Jamie is going to miss you
Nice that you're done with 12th grade and graduated out of this secondary school home of the Ravens seen in the school's gym and I'm done with 12th grade as well!
@@sterlinggarcia9859 no more that's why I said in my last replacement video it would be the last one as well as last summers testing videos I said that it would be the last time I would do some of those schools
There is EMT conduit that there is some data and low-voltage ran in as a sleeve and the code used to be that any metal conduit or raceway must be bonded however I believe the code has now changed where it only needs to be if it's more than 3 m or something like that
11:35 play it at the railroad tracks and I will stop for it.. Sincerely, Lifetime sponsor of the FFA who makes a lot of hay, very little pay Posted Statement (PS): It's a song.
That far ahead is unknown with the average cost of house around 1.2 million here and rent prices being ridiculous until I'm out of school in five years or so I won't even be planning moving out
- at my high school, a bunch of the newer exit signs never glow, but the status light on the side flashes. some of them flash 2 times and others flash 3. i have only seen 2 of the newer exit signs glow at the school (there are at least 20). but ALL the old ones glow. even one of the old ones that has a huge burn mark on it still glows. any idea what's happening here?
At 10:40 you mentioned that the detector "double blinked", what does that mean? Where I work we have the SK-PHOTO-W's and there was a time I was using the toaster and the person who used it before me didn't clean it properly so the room got a little smokey. I got worried that it would potentially set off the system so I began trying to fan out the room and that's when I saw the detector do the double blink thing. Does the "double blink" mean the detector started sensing something but not enough to fully set it off...? Or does it just do that when it's polling every so often...? Happy Graduation by the way, congrats!
I've noticed sometimes they start blinking a little quicker before they go off or if pre-alarm is set up it will go solid red if it's in pre-alarm at least on notifier flashscan.
60 bucks?! Nah you could have used that to get carbon monoxide. Also congratulations on your graduation! Next time I am thinking detector in the house garage.
I’m in a bit of a pickle and was wondering if you can give me any advice the panel I’m working on is having a problem where the acm annunciator is working but if I press the buttons they won’t do activate I’ve switched out the annunciator but to no avail 😢. any help would be very much appreciated
That's tough to say I guess just check programming and see what the buttons are programmed to do check address of the annunciator and communication protocol I can't think of much else other than dumping a new program in
Thank you I’ll see if that works for the panel although I don’t know how easy it will be to dump a new program in considering I’m using one of the legacy panels instead of an nfs panel
@@gamerboy12970 that would require tearing apart my entire first floor and parts of the second floor it would be a very damaging process and extremely expensive as well as risk of freezing
@@gamerboy12970you know the lights on the panels? Annunciators, panels etc. lamp test turns the lights on to make sure they work, doing a reset also works. I’ll be posting a video showing me resetting a system with a lamp test in abt a hour
Who wants to hear my past experience with fire alarms: I also grew up in Canada but I grew up with horns without strobes. In elementary school, I would always get nervous every day because my elementary school had Wheelock MT, and it effected my learning because I'm autistic and horns are so bad for my mentality. That's not even the worst part, when they went off I would go into full panic and would have to plug my ears because they were bleeding loud. When I was in second and third grade in the winter, they would go off unexpectedly to any occupants. Only anyone reading this comment who is autistic, you would understand. When I first heard my highschool alarm for the first time: NB-24 fire bells, they had strobes and sounded alot better and didn't need to plug my ears. I was so thankful to have bells in my high school. Does anyone understand having to deal with Wheelock horns get nervous all the time because of them?
Happy Graduation Day, Nic! Also next system test I dare you to pull the 2 pull stations in both buildings that are the closest to each other (yes, the shed and the shed under the deck count too). Just know your beloved viewers will NEVER unsubscribe. Your viewers love you and I do too! May all of your viewers like this comment.
Like to make Nic happy on his graduation day!
👇
Congrats on the graduation man! I'm graduating tomorrow as well! Funny enough. This is definitely one of my favorite monthly test videos by far because of how in depth these testings were. I.e. the fire alarms, the emergency lighting, etc.
For the July Testing, you should do the Panel Room Pull in the main house. For the garage, you should test the smoke detector in the common space.
Happy Graduation from team Method! We're so proud of you. Amazing system test as always. Our manager wanted to add a comment along with this. "Very good! I love how in-depth you are along with your straightforwardness. Keep it up!"
Yay! I love these videos. ❤ You make my day not as boring with these videos. ❤❤❤
Congrats Nic!
Lol I was gonna say "June testing?" But you have it, love your channel, keep up the good work
Love the videos man. Congrats on graduating
YES! Finally! Just the vid i needed while being sick! Also cool that you graduated:)
another great video, these are absolutely amazing, keep it up! ❤
Nice Video Nic, i love your videos, you matter, and everyone loves you and your videos, keep it up with the amazing work.
GOOD JOB
Nicely explained😊 Nice system test🤩 and Congrats Nic 😁 🎉
Congratulations on graduating Nic!
You should do the duct detector, and the tower pull station for July testing. And congratulations on you graduation🎉
Great video!
oh wow! happy graduation!!!! you graduated after my brother graduated at the end of May!
On the July test in the house do the Cor door smoke detector and for the garage do the storage room detector
Awesome video. Thanks for doing my request for the pull station in the shed of your house. Congratulations on your graduation too
Congratulations Nic on your high school graduation.
It's time to move up in the world, and go to college soon.
Congrats on the graduation Nic. You should do the panel room pull station and water flow
Congratulations on graduating, Nic!!! I do have on idea that you should put the Carbon Monoxide portion of the Garage fire alarm system on Hazard Alert instead of supervisory. I don't know, just something to think about.
Hey, I'll bet your coworker, Jamie is going to miss you
Nice
the garage supervisory sounds like a high pitched railroad crossing!
oh yeah it does lol
Nice I wish I had fire alarms 😊
Congratulations
congrats
nice video
For July, you should do the emergency light test at night for the garage.
My brother graduated from grade 12 also. Happy graduation, you are the future
Congrats on the grad! Nice video I'm 1 year younger
11:34 sounds like a Railroad crossing bell
This is awesome
Congrat's on passing 12th grade
Had to edit the message it was saying awsome instead of awesome... sometime's i have auto correct on my phone...
Nice that you're done with 12th grade and graduated out of this secondary school home of the Ravens seen in the school's gym and I'm done with 12th grade as well!
Do the high.tower pull station😊
For the July test you should open the fire sprinkler drain.
congratulations on graduating!!!🎊🎊🎊 Are u still planning to work for the company/school district doing fire alarms and emergency & life safety stuff?
I am gone from the school district once I am out of school
@@nics-systems-electric so no more school fire alarm videos. I will miss them
@@sterlinggarcia9859 no more that's why I said in my last replacement video it would be the last one as well as last summers testing videos I said that it would be the last time I would do some of those schools
Can you explain the grounding/bonding going on above the Garage fire panel?
There is EMT conduit that there is some data and low-voltage ran in as a sleeve and the code used to be that any metal conduit or raceway must be bonded however I believe the code has now changed where it only needs to be if it's more than 3 m or something like that
Second hi nic
11:35 play it at the railroad tracks and I will stop for it..
Sincerely,
Lifetime sponsor of the FFA who makes a lot of hay, very little pay
Posted Statement (PS): It's a song.
How loud are the Low Frequency Alarms compared to the High Frequency Alarms?
Congratulations Nic! Question. How come you don't have a Carbon Monoxide alarm in your house and only have one in your garage?
There is no risk of carbon monoxide in either building the garage was done more as a demonstration and for fun
@@nics-systems-electricyou shoud add a carbon monoxide system in both of your houses
@@thunderbolttdmplayz6750 did you not read my previous comment?
Congratulations on graduating! Have you decided where you will go for college or trade school?
Yes I am enrolled in level one electrical
Hey nic question what will you do with the fire alarm systems when you move out. Plus congratulations on finishing high school
That far ahead is unknown with the average cost of house around 1.2 million here and rent prices being ridiculous until I'm out of school in five years or so I won't even be planning moving out
Could you set up a generator running supervisory in the garage building?
It could be done with a relay and monitor module
Nic can you do the pull station in the panel room in the house
I see you blurred your Remote Head so you wouldn't spoil it for the installation video! 😂
Yes there would have been to many questions it's sometimes easier just to blur things out
WOWO
I wanna make a demo system how many devices would you recommend me putting up?
As many or as little as you'd like
My Suggestion I Wonder If You Can Put A Fire Alarm Horn Strobe In The Generator Room
Yes it's theoretically possible
Should I either get a MS5 or MS10? All it’s gonna have is like 5 pulls a couple of smokes and 5 alarms
Depends if you need 5 or 10 zones the 10 UD also has filtered power vs the 5ud is fwr so the 10UD is better if you want to use mechanical devices.
He should get more likes
- at my high school, a bunch of the newer exit signs never glow, but the status light on the side flashes. some of them flash 2 times and others flash 3. i have only seen 2 of the newer exit signs glow at the school (there are at least 20). but ALL the old ones glow. even one of the old ones that has a huge burn mark on it still glows. any idea what's happening here?
They are probably flashing a error code usually they should still be on in most cases but those may be different.
❤
At 10:40 you mentioned that the detector "double blinked", what does that mean? Where I work we have the SK-PHOTO-W's and there was a time I was using the toaster and the person who used it before me didn't clean it properly so the room got a little smokey. I got worried that it would potentially set off the system so I began trying to fan out the room and that's when I saw the detector do the double blink thing. Does the "double blink" mean the detector started sensing something but not enough to fully set it off...? Or does it just do that when it's polling every so often...? Happy Graduation by the way, congrats!
I've noticed sometimes they start blinking a little quicker before they go off or if pre-alarm is set up it will go solid red if it's in pre-alarm at least on notifier flashscan.
60 bucks?! Nah you could have used that to get carbon monoxide. Also congratulations on your graduation! Next time I am thinking detector in the house garage.
They both cost about the same I got the smoke pen for finding airflow and other purposes then fire alarm testing
Bro, I’m sorry for the way I’ve been treating you
Are you gonna put a Home alarm chime strobe in the Garage
No it's not needed because you can hear the panel from anywhere in the garage
In July test the pull station by the panel in the house for the garage test the pull station in the tower
Please nic
I’m in a bit of a pickle and was wondering if you can give me any advice the panel I’m working on is having a problem where the acm annunciator is working but if I press the buttons they won’t do activate I’ve switched out the annunciator but to no avail 😢. any help would be very much appreciated
That's tough to say I guess just check programming and see what the buttons are programmed to do check address of the annunciator and communication protocol I can't think of much else other than dumping a new program in
Thank you I’ll see if that works for the panel although I don’t know how easy it will be to dump a new program in considering I’m using one of the legacy panels instead of an nfs panel
Why does the L series in the garage have French fire lettering? Is that a code in your area?
Because that's one of the languages spoke in Canada
@@nics-systems-electric Oh you're in Canada? I forgot about that. That device is a P2RLA I'm guessing right?
Can you show the generator power on the actual house?
The generator doesn't power the house.
Tower Pull Station
I would like to have the same house than yours
Why is the barns panel on supervisor so loud?
I don't understand what you mean
@@nics-systems-electricwhat’s the point of the garages panel being loud when the house alarm is going off?
@@Jasiri533 so if I'm in there I know that the fire alarm is going off in the house and my house is potentially on fire?
@@nics-systems-electric so that’s why it beeps so if your in there you know that the fire alarm in the house went off
Are you going to install a sprinkler system in the house?
No I won't be
@@nics-systems-electricwhy
@@gamerboy12970 that would require tearing apart my entire first floor and parts of the second floor it would be a very damaging process and extremely expensive as well as risk of freezing
saying first so little kids can’t
Understandable
lol
THAT IS NOT A FURNACE IT'S AN AIR HANDLER I HATE WHEN SOMEONE MESSES THAT UP!
It's not wrong though... a furnace that is supplying conditioned air is an air handler.
@@nics-systems-electric oh ok and also I SEXUALLY IDENTIFY AS A SYLVEON!
@@nics-systems-electric also happy 🏳⚧🏳🌈
Crongrat on graduation 🎉 love you so much ❤❤❤hey quick question don’t need to answer but do you vape
No i don't
@@nics-systems-electricokay just a question please do never 😊
@@nics-systems-electricwhat is a lamp test
@@gamerboy12970you know the lights on the panels? Annunciators, panels etc. lamp test turns the lights on to make sure they work, doing a reset also works. I’ll be posting a video showing me resetting a system with a lamp test in abt a hour
@@gamerboy12970I is pretty obvious 😅
Who wants to hear my past experience with fire alarms: I also grew up in Canada but I grew up with horns without strobes. In elementary school, I would always get nervous every day because my elementary school had Wheelock MT, and it effected my learning because I'm autistic and horns are so bad for my mentality. That's not even the worst part, when they went off I would go into full panic and would have to plug my ears because they were bleeding loud. When I was in second and third grade in the winter, they would go off unexpectedly to any occupants. Only anyone reading this comment who is autistic, you would understand. When I first heard my highschool alarm for the first time: NB-24 fire bells, they had strobes and sounded alot better and didn't need to plug my ears. I was so thankful to have bells in my high school. Does anyone understand having to deal with Wheelock horns get nervous all the time because of them?
I had to deal with a horn strobe in my elementary school
Well, there be a video today is Wednesday you post on Wednesday
Do you still have your railroad crossing gate if you do can you please use it😀
It's around
@@nics-systems-electric can you use it in the next video please
@@nics-systems-electric so I would like to see it again and I really like your videos
@@user-cj4zj4bw4o I did a video on it last year if your interested
@@nics-systems-electric can you do a new video with it please
Hiiiiiii
Ceiling Fan??? 4:44
Yup
First her fire alarm video!
his ❎ her✅
Second
Dude, why you put? Fire alarm house.
Doo. The. Co monitor
I did
Hey nick I love your videos
Hi nick😊 to day is my first holiday I live in Canada and went to Vietnam
On the July test in the house do the Cor door smoke detector and for the garage do the storage room detector