WE had the blitz programming language for ours. My son who was about 5 or 6, could make it tell knock knock jokes and drove us all crazy. My daughter loved thomas the tank and played it all the time with that music that just repeated on and on. We survived to tell the tale and so did they. The A500 went as a trade in for an a1200 a few years further on. Happy days when you could still do programming with the kids.
@@rossandrews8218Same here, but I am 47😀 A shame that you cant get the kids to play the games because they are so spoiled with high tech computers etc🇸🇪
Still have mine and the separate disk drive (along with all my games). Hasn't been on in years but maybe one day I'll fire back up TV Sports Football :)
A big compliment i can give you, is that even though i know nothing about wiring, or capacitors, this was still very enjoyable to watch, and i will be watcing your channel again
Outstanding repair job, the logical approach you use for troubleshooting along with your consistent insistence that you're not a professional makes this seem so easy and accessible, yet I know it's not easy, so hats off to you!
Been a long time subscriber and must admit, I skipped the raps in the past. But now, I find myself appreciating the effort Steve puts in. Good on yer man! One of my fav channels this one 👍🏻
I posted in the main thread the best way to play Pinball Dreams is the GP32. It is so much more intuitive and fun in the handheld format. The flippers are the shoulder buttons, which feels much more natural to pinball. Your thumbs are right there to do English. Britain was one of the few places with an official GP32 release (it was a South Korean handheld). A ton of emulators and homebrews are out for it as well. But the PD game is native and not emulator.
And next time on StezStix Fix, how to repair the track damaged and now flapping around after removing the capacitor at 11:37 . Easily done, think most have at some point!.
If the power bank goes into safe mode, is totally a short somewhere. I don't even try multiple times anymore (burn a ram that way). I need a capacitor bible like yours.
The Zero resistors are not fuses. They are more like jumpers. Since most boards today are populated by a pick and place machine and would cost more to have a person inserting jumpers zero resistors are used.
Adding to that is the cost of a multilayer board with more then 2 layers is more expensive then a couple of zero ohm resistors placed by a pick and place machine. You do still see a bunch of stuff made in china with single layer construction and wire jumpers. Recent Chinese "boombox" teardown from EEVblog comes to mind.
That upper register suits you well for the karaoke sections. Good work finding the blown cap. In general, the tiny ones going from the plus rail to the ground rail are going to be decoupling caps and are nominally 100nF. And incredibly hard to not blow off the board, so good job on that.
These things are simply not meant to be repaired. Paying a qualified repairman who would have a lot more overhead would be more expensive than just buying a new or used one. This drives ever smaller parts, since they ain't repairable anyway.
I'm glad I wasn't able to access TH-cam the last few days, it means I get a StezStix Fix video on a Sunday, softening the blow of having work on Monday. Thanks for this Steve, great vid as always!
Attempting my first fix tomorrow.. my blue yeti mic needs a new mini USB port and I’ve been watching these kinds of vids and they’ve inspired me to try… It’s only a backup mic as I now use an Elgato Wave 3 as my main…
I look so forward to your videos, I've been tinkering myself lately and you make it so clear how to troubleshot these issues and admit you don't know sometimes and it's awesome!
Hello Steve. Would be nice If you buy that solder tweezers to desolder an solder small SMD parts. I think they would be Very Handy for you. Great Videos.
It would be awesome if you could make the little keyboard actually work. I'll bet you can do it! Give it a shot. That would be a really cool video. Speaking of which, all your videos are great. I've watched the one where you put Alexa on that old clock radio at least 5 times. Thanks for the fun videos.
Ceramic capacitors sometimes only have 20% tolerance, especially as they get smaller. Since the good one measured 120nF then replacing the bad one with 100nF was the right thing to do!
Wouldn't a 200nF been just as good choice if not better? Excess capacitance isn't after all too huge deal in most applications. Would think a smaller cap could possibly be too weak to supply whatever component that its feeding. Or have I understood this wrong?
@@wryyyy Remember there were 3 capacitors in parallel, hence Steve had to check each one in turn to find the shorted one. The large one is for smoothing (tens or even hundreds of μF) , the smaller ones are for high frequency noise filtering and are pretty much always 100nF.
I know its not the most elgant solution but puttinf two 220nF in series by tilting them up in an "A" shape to make them fit the pads will give you 110nF wich will do the job ...
It's one of those cheap Retro Tribute console things, just running an emulator. They're good, but the selection of games is usually a bit low. Most can usually be hacked to add your own ROMS tho, which makes them useful. Sadly, the controllers that come with such tribute machines are utterly awful and almost always use a proprietary connection so you can't use your own. And the descaler is usually pretty junk too.
Ahh the best computer ever made. I had the A500, A600 and A1200 and I loved them to bits. Good times. Wish I had my old ones now... Spent too many hours with Pinball Dreams, Illusions and Fantasies. Oh, Stupid Autofocus!
Yeah, agree on all counts. I still have my OG A500 somewhere. I should really dust that off and see if it still works! And yes, the autofocus let me down again! I think I need to fiddle with the settings... 😁
Thanks for a great channel with great videos! You inspired me to learn and repair my own and others stuff. These SMD capacitors are a pain though with no markings. I have done some research and I believe that the exact value is mostly needed in clockcircuits and motors. In most usercases a higher farad capacitor will still work but lower may be insufficient. In some cases it is still better with lower than original if not exact. I feel that it leaves some room for trial and error if you don't have a complete working unit to measure, or am I wrong? /Much love from Sweden
Hey Steve! I've recently hit the jackpot and found your videos. I love your content and it reminds me how much I love to open electronics to see how they tick, been an interest of mine since I was a kid. Keep up the awesome job! Also since I'm new to your channel, can you or someone tell me who is the little fella that pops up in most of your videos? he makes me laugh 😂 I've also seen Minions and Beaker make an appearance.
I've been using a brush on flux called RF800, grabbed it when my Amtech tube ran out and actually found it extremely good producing good results on solder jobs so am kinda stuck on that brand if you ever want to try it out.
Great, great videos, I have nothing to do with fixing 'stuff' and yet I find myself gravitating to your videos many a time. Just one question for the time being. In at least one of your videos I noted you using a small low-profile vice for holding PCB's but I just cannot find anything online similar (I have an Andostar so low profile is important). DO you have a model no or brand for that?
looking into buying a digital microscope for myself, and was curious about your custom stand you use for your microscope. it looks better than the stands that come default with it. was wondering if you could do an update video of your whole setup?
hmmm. looks like those capacitors go bad within about two years LOL (incidentally i guess) means all of my original Amigas have lasted longer. but I think it's about time those get recapped one day soon by now. love those little A500, but I cant wait for a full size from RETRO GAMES LTD to get released. hey @Steve i guess you aminimiga runneng on yours to? yes! no? or pandora500
Good work Stevo. But why didn't you just inject 1v 1a into the main power rail and use your thermal cam to see which cap it was, why go the random route? Also, you can not replace that cap and it would still probably work just fine. 90% of ceramic capacitors are there for to comply with EMF standards and the board can run just fine without most caps. All in all good job mate.
Hi, Interesting the cap and resistor in series. With the cap shorted won't that resistor have seen some heat? 5v 0.15a gives 0.75W across that resistor.
...and it was all yellow
They need some retrobritin’
You need an esr meter to measure caps in circuit 🙌. Though that is small might be tricky 😂
Stupid burnt capacitor
Should use a grain of white rice to show components size lol
Quality content 👌
Oh the A500 was a gift from the gods for any computer nerd back in the day, including myself.
Came here for the repair stayed on for the music
WE had the blitz programming language for ours. My son who was about 5 or 6, could make it tell knock knock jokes and drove us all crazy. My daughter loved thomas the tank and played it all the time with that music that just repeated on and on. We survived to tell the tale and so did they. The A500 went as a trade in for an a1200 a few years further on. Happy days when you could still do programming with the kids.
Bought mine when i was 12, cost me 500 quid, and a further 50 quid for the 256mb ram upgrade, still have it to this day, am 46 now.
@@rossandrews8218Same here, but I am 47😀 A shame that you cant get the kids to play the games because they are so spoiled with high tech computers etc🇸🇪
Still have mine and the separate disk drive (along with all my games). Hasn't
been on in years but maybe one day I'll fire back up TV Sports Football :)
@StezStixFix... see at 11:38... you disconnected the capacitor pad on the second amiga
Oh dang, he did too. At least he's got a spare now!
Yeah I notice that as well (but wasn't 100% sure).
@@mintpalmer Easy pad fix.
I saw that as well probably not connected, but I don’t think it will make a lot of difference
It's lifted, but it's still attached. Should be fine.
I can't wait for the day when you get so many patrons that you need to start doing a 20 minute prog rock epic with every video.
Don't encourage him😅
Gonna have a Patreon hip hop album.
"In The Mix With Monkey Joe Tokyo."
It blows my mind how you can be so accurate with such insanely minuscule bits! You have some serious skill!
My original A500 still works fine almost 40 years later. Different build quality back then.
That's freaking impressive! :)
A big compliment i can give you, is that even though i know nothing about wiring, or capacitors, this was still very enjoyable to watch, and i will be watcing your channel again
I just replaced three 0402 capacitors and one resistor on an Xbox One S. Those things are impossibly small! Good work!
Outstanding repair job, the logical approach you use for troubleshooting along with your consistent insistence that you're not a professional makes this seem so easy and accessible, yet I know it's not easy, so hats off to you!
Standard decoupling capacitor was always 100nF (0.1uF) Always a pretty safe bet - 100nF + tolerance -> 120nF so go for 100nF
I had the original Amiga A500 years ago, I use to love the Backlash game
great video and repair
Been a long time subscriber and must admit, I skipped the raps in the past. But now, I find myself appreciating the effort Steve puts in. Good on yer man! One of my fav channels this one 👍🏻
I still skip them. I love the videos, though.
Wouldn't it be handy if there was an online database where you could add resistor values of consoles as you find them for the repair community‽
the 100nf is called a decoupling capacitor, you usually find them across the supply +vcc to 0V, near chips etc, smooths spikes in the supply line.😃
PINBALL DREAMS! I have fond memories on that one!
I posted in the main thread the best way to play Pinball Dreams is the GP32. It is so much more intuitive and fun in the handheld format. The flippers are the shoulder buttons, which feels much more natural to pinball. Your thumbs are right there to do English. Britain was one of the few places with an official GP32 release (it was a South Korean handheld). A ton of emulators and homebrews are out for it as well. But the PD game is native and not emulator.
Psp has portrait mode @@christo930
Stez is a cute guy. I hope he is as kind and gentle as he seems. I love your work.
My like is for the Coldplay cover at the end. 10/10
And next time on StezStix Fix, how to repair the track damaged and now flapping around after removing the capacitor at 11:37 . Easily done, think most have at some point!.
You're going to need a new "days since" sign, this one for lifting pads. You definitely lifted the pad of that capacitor on your own a500.
If the power bank goes into safe mode, is totally a short somewhere. I don't even try multiple times anymore (burn a ram that way). I need a capacitor bible like yours.
The Zero resistors are not fuses. They are more like jumpers. Since most boards today are populated by a pick and place machine and would cost more to have a person inserting jumpers zero resistors are used.
Adding to that is the cost of a multilayer board with more then 2 layers is more expensive then a couple of zero ohm resistors placed by a pick and place machine.
You do still see a bunch of stuff made in china with single layer construction and wire jumpers.
Recent Chinese "boombox" teardown from EEVblog comes to mind.
Just shows the value of having a "golden" unit to have as a reference. Good job there.
That upper register suits you well for the karaoke sections.
Good work finding the blown cap. In general, the tiny ones going from the plus rail to the ground rail are going to be decoupling caps and are nominally 100nF. And incredibly hard to not blow off the board, so good job on that.
These things are simply not meant to be repaired. Paying a qualified repairman who would have a lot more overhead would be more expensive than just buying a new or used one. This drives ever smaller parts, since they ain't repairable anyway.
I'm glad I wasn't able to access TH-cam the last few days, it means I get a StezStix Fix video on a Sunday, softening the blow of having work on Monday. Thanks for this Steve, great vid as always!
Attempting my first fix tomorrow.. my blue yeti mic needs a new mini USB port and I’ve been watching these kinds of vids and they’ve inspired me to try…
It’s only a backup mic as I now use an Elgato Wave 3 as my main…
I look so forward to your videos, I've been tinkering myself lately and you make it so clear how to troubleshot these issues and admit you don't know sometimes and it's awesome!
weekend, beer, steve video. life is good.
Total respect to you sir, great diagnostics and it's fixed great job!!!
Brilliant repair Steve turn the cap over you took off of your board you broke the bottom of the lower side of the cap 😊
I will never get sick of the A500 Mini startup music at 15:19
Just found your channel
Loving it
Good to see the old things coming back to life
Hi , just an idea try repair an onkyo amplifier or sony or something fun. Would be fun to watch
Back of the net! Good job Steve with a ridiculously small cap
@StezStixFix A good practice is always to replace a Capacitor with one that is of equal or greater value, and never below.
I like your sense of humour 👌 well done with the fix, good cheap price and a quick fix!
You're ace. Love this channel I found only today.
Of course, it's always the last component you test but that was literally the last component it could be. Nice job!
Hello Steve. Would be nice If you buy that solder tweezers to desolder an solder small SMD parts. I think they would be Very Handy for you. Great Videos.
Nice machine.. Best purchase i made the last year...enjoy it...
Out bloody standing repair job, Steve.
Pinball Dreams is my Favourite Amiga game, Steve! Still have working(?) Disks for it even
Excellent fix Bodge. Those stupid small components.
MAN... your rhymes and beats are FRESH !!!
Pinball Fantasies is where it's at.
I remember how chuffed I was when I got my A500. It was a big deal!
Wild to see it on such a tiny board X)
Well done Steve this time you got it 😊
It would be awesome if you could make the little keyboard actually work. I'll bet you can do it! Give it a shot. That would be a really cool video. Speaking of which, all your videos are great. I've watched the one where you put Alexa on that old clock radio at least 5 times. Thanks for the fun videos.
You need a milliohm meter to check which is the faulty capacitor, theyre mostly connected in parallel here, meaning they will all show as shorted.
I'm glad I didn't skip :D that was epic!
these are wonderful bits of kit
Ceramic capacitors sometimes only have 20% tolerance, especially as they get smaller. Since the good one measured 120nF then replacing the bad one with 100nF was the right thing to do!
Wouldn't a 200nF been just as good choice if not better? Excess capacitance isn't after all too huge deal in most applications. Would think a smaller cap could possibly be too weak to supply whatever component that its feeding. Or have I understood this wrong?
@@wryyyy Remember there were 3 capacitors in parallel, hence Steve had to check each one in turn to find the shorted one. The large one is for smoothing (tens or even hundreds of μF) , the smaller ones are for high frequency noise filtering and are pretty much always 100nF.
I know its not the most elgant solution but puttinf two 220nF in series by tilting them up in an "A" shape to make them fit the pads will give you 110nF wich will do the job ...
Great video, also amusing and entertaining. I didn't even know there was an a500 mini. I only ever had a500+ and a1200 back I the day.
It's one of those cheap Retro Tribute console things, just running an emulator. They're good, but the selection of games is usually a bit low. Most can usually be hacked to add your own ROMS tho, which makes them useful. Sadly, the controllers that come with such tribute machines are utterly awful and almost always use a proprietary connection so you can't use your own. And the descaler is usually pretty junk too.
A great little system.
Your videos are always great, have you ever considered ceramic tweezers? They don't wick the heat from the component your desoldering.
no way!! paintball dreams!! that was my fav game when kid!
Invest Soldering Iron TWEEZERS. Makes removing surface mount parts VERY EASY
until you squeeze too hard and they still ping.
They make a tip for a soldering iron that is a set of heated tweezers. They make help you with these capacitors and fuses.
As an electronic technician, and almost engineer, some filter capacitor, you don't need replace all the time, on this case will works fine without.
Pinball dreams. The music on the nightmare table was epic!
Ahh the best computer ever made. I had the A500, A600 and A1200 and I loved them to bits. Good times. Wish I had my old ones now... Spent too many hours with Pinball Dreams, Illusions and Fantasies.
Oh, Stupid Autofocus!
Yeah, agree on all counts. I still have my OG A500 somewhere. I should really dust that off and see if it still works! And yes, the autofocus let me down again! I think I need to fiddle with the settings... 😁
@@StezStixFix Maybe with your TH-cam success revenue you can just hire a cameraman. Called Dave.
😂
C64 is the best computer ever made!
Always entertaining and educational. You are the best.
Nicely done Steve!
Double check that you didn't rip a pad on yours when testing the CAP. When putting it back on, the bottom pad looked funky.
He's more Coldplay than Coldplay themselves. Nice save on the Amiga.
You Sing very well anddrepaiir very well. Nice One, Steve! ,👍
I was literally just rubbing some Himalayan rock salt onto my roast pork joint as you was comparing the size hehe. Talk about minuscule!
that rap was the best of them so far! great fix too
Thanks for a great channel with great videos! You inspired me to learn and repair my own and others stuff. These SMD capacitors are a pain though with no markings. I have done some research and I believe that the exact value is mostly needed in clockcircuits and motors. In most usercases a higher farad capacitor will still work but lower may be insufficient. In some cases it is still better with lower than original if not exact. I feel that it leaves some room for trial and error if you don't have a complete working unit to measure, or am I wrong?
/Much love from Sweden
Love Pinball Dreams (Nightmare table)! Might by a mini now just to play that and Fantasies!
Fun to follow you along as always, thx for sharing 😊
Hey Steve! I've recently hit the jackpot and found your videos. I love your content and it reminds me how much I love to open electronics to see how they tick, been an interest of mine since I was a kid. Keep up the awesome job! Also since I'm new to your channel, can you or someone tell me who is the little fella that pops up in most of your videos? he makes me laugh 😂 I've also seen Minions and Beaker make an appearance.
what is that measurement tool you used? is there a link? please and thank you?
I've been using a brush on flux called RF800, grabbed it when my Amtech tube ran out and actually found it extremely good producing good results on solder jobs so am kinda stuck on that brand if you ever want to try it out.
I must have issues, as I find your humour and patreon-rap too good... and I like your fixing of things. 👍 Subscribed.
We had the a500 in the 1990s , it had a 3 1/4" floppy drive which was quite new back then. Im guessing this mini has its own hard drive of some sort.
YES!!! GET IN THERE! 😅
Great, great videos, I have nothing to do with fixing 'stuff' and yet I find myself gravitating to your videos many a time. Just one question for the time being. In at least one of your videos I noted you using a small low-profile vice for holding PCB's but I just cannot find anything online similar (I have an Andostar so low profile is important). DO you have a model no or brand for that?
GET IN THERE!!!
nice, I paid around £35 on sale for mine brand new, sometimes you get lucky.
Great vid!, quick question, where do you get a mix of caps and resistors etc but not have to buy a reel of 5000?
I look forward to your TH-cam vids. Keep it up. 💯 😊
Get in there !!!!! Nice work !
Couldn't you test those capacitors for a short in place? Good video thank you.
Good job!
Great job
looking into buying a digital microscope for myself, and was curious about your custom stand you use for your microscope. it looks better than the stands that come default with it. was wondering if you could do an update video of your whole setup?
Yo bro, that blue lacoste fresh af! We call em Louisiana POLO down here😂
I had the original back in the day. What a thing thst was for the time.
@StezStixFix love the videos. I'm curious, what do you do with the consoles and such that you fix? Do you put them back up on eBay or hang on to them?
When you were putting the cap back in place, you actually tore off a bit of the capacitor.
Hello, nice work👍👍, greetings from Italy 🤗🤗
hmmm. looks like those capacitors go bad within about two years LOL (incidentally i guess) means all of my original Amigas have lasted longer.
but I think it's about time those get recapped one day soon by now.
love those little A500, but I cant wait for a full size from RETRO GAMES LTD to get released.
hey @Steve i guess you aminimiga runneng on yours to? yes! no? or pandora500
Good work Stevo. But why didn't you just inject 1v 1a into the main power rail and use your thermal cam to see which cap it was, why go the random route? Also, you can not replace that cap and it would still probably work just fine. 90% of ceramic capacitors are there for to comply with EMF standards and the board can run just fine without most caps. All in all good job mate.
The amount of times I had my real A500 open, it seems incredible to me how small the board for the mini is.
Nicely done!
I did a double take when you reached for the "aluminum" tape, and not the "aluminium" tape.
The *best* way to play Pinball Dreams is on a GP32. It's native to the GP32 and the control is just much, much better.
Hi,
Interesting the cap and resistor in series. With the cap shorted won't that resistor have seen some heat?
5v 0.15a gives 0.75W across that resistor.
Great job mate!