Roughly 1.5 years years back, I had to change my cone set from ArtOfMotorcycles. After a smooth 11,000 km covered within 6 months, I got them checked in AOM and they couldn’t identify any problems with it. Recently, I started to feel some resistance while steering Nora. I got SKF bearings fitted temporarily in a garage in Trivandrum. Even after replacement, I felt the bearings locking up and the handlebar was consistently stiff. Unhappy with this come set, I decided to head to ArtOfMotorcycles garage where Zoheb bhai replaces it with a new NTN cone set. Complete details are explained in this video.
Nice to see a professional approach to service n maintenance. However I soo wish they used a bearing press / compressor to fit those cones and not a hammer.
The particular issue which I'm facing currently in my Himalayan bro. It's just run around only 5300kms. But i felt this issue from 3500kms itself. Showrooms PPL are not good at this repair bro. Really fed-up with them. Now i can show this video with them🥰🥰
Hi. I'm also facing the same cone set issue with my relatively newer bike (1500 km). Most RE service centres said it is not an issue and that it is naturally like that and one centre tried to fix it but the issue started again after a few days. Should try it with some other service centres now.
Art of motorcycle is the heaven place for bikes which are reform and refurnished into such way they are brought to life again. Kudos to zoheb bhai and crew . Crew are much best than Enfield service center. 💯💯💥❤️
I have a question? If you replaced the bearing with them last ? How come you have run into this problem? Because when the bearings have been installed and sealed , they should not give this trouble. How many kilometres after 11000? Did you notice the trouble and had to replace it ? I don't get it? How did the lubrication wear out ?
Hi Brother- Can you tell me from which area in Bangalore did you purchase your RE Himalayan from. Also good places to install engine leg guards and headlights for Himalayan
@@SpilTrez because of the gap it creates between the chassis and the cap ..the default one creates a oil seal type thing as it is more snug than the plastic one and with the grease it creates a better sealing than the plastic one...trust me I've tried it earlier
Hey, is it possible to get a navigation tower for Himalayan. Ofcourse it needs to be road legal. I'm desperately thinking of getting one(which is not an option cos no one makes one for this bike) or make one even it takes me 6 months. Would like to know your thoughts on it.
Ask him to talk less and do work simply blabbering all stuff they will not wash bike properly only if u have TH-cam channel and subscriber they will do work, they services charge will be like BMW & Ducati bike charge simply waste of money self experienced. After serving i unfollowed they channel in all platforms.
Hi, I would like to mention that the main motive of Zoheb bhai is to ensure the best performance of the motorcycle at all times. The service provided by the team at AOM is curated in such a way that the motorcycle can be driven smoothly without any hassles for another 10,000km. Smaller service centres might provide cheaper service but only temporarily give a solution. Good, reliable service anywhere is always expensive. P.s. he wasn’t blabbering, he was trying to spread his knowledge to other riders and the rest of his team were working on other bikes.
AOM handlebar is the worst; I changed in my D390 and duke vibrates because of smaller diameter of the handle as compared to the stock one, it’s really overrated and jugaad work. It’s a salesman thing, they try to convince you and make you feel you have a problem. And workers there don’t respect your knowledge; they be like main sab jaanta hoon. 😂
Roughly 1.5 years years back, I had to change my cone set from ArtOfMotorcycles. After a smooth 11,000 km covered within 6 months, I got them checked in AOM and they couldn’t identify any problems with it.
Recently, I started to feel some resistance while steering Nora. I got SKF bearings fitted temporarily in a garage in Trivandrum. Even after replacement, I felt the bearings locking up and the handlebar was consistently stiff. Unhappy with this come set, I decided to head to ArtOfMotorcycles garage where Zoheb bhai replaces it with a new NTN cone set. Complete details are explained in this video.
Can you share shop address, My himalayan also Handles bar stiff, Royal Enfield showroom said neeed to change cone set.! I intrest to bhai shop.
i too got my brother Himalayan first chain for 36k km life.
and i have brought the same ntn conset this time.
@@suriyav5258 Art Of Motorcycles
No. 51, 7, 1st Main Rd, Pukhraj Layout, Adugodi, Bengaluru, Karnataka 560030
goo.gl/maps/45oERkv4GmhvM7yn9
@@SpilTrez .Thank you brother:)✨🙏
Nice to see a professional approach to service n maintenance. However I soo wish they used a bearing press / compressor to fit those cones and not a hammer.
The particular issue which I'm facing currently in my Himalayan bro.
It's just run around only 5300kms.
But i felt this issue from 3500kms itself.
Showrooms PPL are not good at this repair bro. Really fed-up with them.
Now i can show this video with them🥰🥰
Mechanic's English is on fire
Hi. I'm also facing the same cone set issue with my relatively newer bike (1500 km). Most RE service centres said it is not an issue and that it is naturally like that and one centre tried to fix it but the issue started again after a few days. Should try it with some other service centres now.
Yep, I did the same thing initially; I knew authorised service centres wouldn't do the job. As a result, I took it to Art of Motorcycles.
this is so cool!!
would love to see more uploads like this..👏✌️
Coming at you soon :D
Art of motorcycle is the heaven place for bikes which are reform and refurnished into such way they are brought to life again. Kudos to zoheb bhai and crew . Crew are much best than Enfield service center. 💯💯💥❤️
I saw where a Himalayan owner installed a zerk fitting to the steering head to grease it regularly.
Great fan of your content and especially your video quality 🔥 we need fan meet-up
Thanks, man. I had plans for a meet-up this month, but due to unfortunate issues, I have postponed it.
Hey man !
I'm a new sub .
Saw all your old videos .
You're just great .
Keep going . Happy and safe riding
Thanks a ton man :)
ONLY TRUE BIKE LOVERS WILL WATCH THIS VIDEO TILL END.... ❤🔥❤🔥
Only spiltrez lovers
😂
Yes yes😊😊
I understand. I'm leaving early
Good to see you after a long break❤❤
Good to be back as well.
Will visit the Art of motorcycles when I cross through banglore ✌🏼
Waiting for the next one to know about service charges as well 😉
Coming up soon :)
This is some surgical level of service at AOM. Worth.
1. Is there grease inlet for maintenance w/o dismantling the stem?
This is the type of guy I always wanted to service my bike....a dream unless I move to KA
Nice video man keep up the good work 😀😀
Thanks 😁
Best Service Team ❤️.
Finally he is back
Doctor of himalayan❤️
Spiltrez nice video as always 👍
very informative broo, need some more like these....!!!!!!!
Coming at you soon :)
Nice explanation..... I have Apache but when it comes bike the problem are same...
I have chain noice issues .... Soon i will be there 😁
Go on :)
Welcome back brother
Bro waiting for u r new videos and watch u r old videos again and again😄💥🔥🔥
Thank you so much 😀
Bro, did the Autoengina crash-guard lose all it's coating/paint? it looks dull now.
Service wale bhai ka TH-cam p kya name se channel h?
My bike 11500 km runed. sometimes feeling powerloss , showroom service is such a waste.
Plz get a video on adjusting the rear mono shock
I have a question? If you replaced the bearing with them last ? How come you have run into this problem? Because when the bearings have been installed and sealed , they should not give this trouble. How many kilometres after 11000? Did you notice the trouble and had to replace it ? I don't get it? How did the lubrication wear out ?
Please make a video about Himalaya timing chane issue...
Hey bro
What if we don't change the cone set ... what will be the problem
Bro your bike is super
Amazing video
sir inform me can i set those tnt cone set on r15 v3
which clutch setting is the best for gear shifting..half clutch or full clutch??
Do you experience any vibrations with AOM handlebar?
Not really
@@SpilTrez I’m referring to the vibrations post 3k rpm. Do you have that?
Is there a plan for a new bike?
how often do we need lubricant conset.
Lots of love for Zoef Vi
Me too man, love 'Zoef Vi'
@@SpilTrez Means a lot sir ❤️
Love from West Bengal ❤️❤️
Waiting for next part ❤️❤️
This is the most annoying problem for Himalayan iam tired of going to change again & again to the service centre
Hi Brother- Can you tell me from which area in Bangalore did you purchase your RE Himalayan from. Also good places to install engine leg guards and headlights for Himalayan
Very informative ❤️
zoheb bhai doing best
Bro first ntn bearing only lasted 11k km..how does it happening??
It is just showing that ntn bearing not as good as og.
Give a insight on this
Do they service Dominar 400
Yep, they do :)
Bro can i ride with you in Bangalore i also have Himalayan 2022 model
Bro bike ಗ್ಯಾರೇಜ್ nema
Approx how much did it cost
Beautiful video .. how did u learn Kannada ?
Bro can you give some information about adjusting the rear mono shock
Next video :)
Use the default metal cone joint cap not the blue plastic one
Why do you say so?
@@SpilTrez because of the gap it creates between the chassis and the cap ..the default one creates a oil seal type thing as it is more snug than the plastic one and with the grease it creates a better sealing than the plastic one...trust me I've tried it earlier
Zoheb bhai knows the himalayan better than RE
Art of motorcycle ♥️
How many kms you covered with your bike's previous NTN cone set bearings?
I think around 18-19k kilometres.
Hey, is it possible to get a navigation tower for Himalayan. Ofcourse it needs to be road legal. I'm desperately thinking of getting one(which is not an option cos no one makes one for this bike) or make one even it takes me 6 months. Would like to know your thoughts on it.
Zana has a nav tower that sits behind the speedo. Check it out.
@@sinuslebastian6366 are you referring to the GPS mount?
@@loheshpawar yes
@@sinuslebastian6366 i checked that already. It's not what I was referring to.
Namaskaraa Bengaluru 🙏
When is next?
Today evening/tomorrow :)
🙌🏻
Bro you talk kannada too wow
I was born and brought up in Karnataka.
10:30 no no! no!!! Stop killing your bearing
At least use a mallet or keep a wooden plank inbetween before striking with the hammer
They should be using mounting tools to fit the bearings. In a clean room 😅. As per manufacturer's manual.
Bro where is this service center i also wanted to visit them ,,, i am impressed by there work 😌😀😀😀😀🔥🔥
Art Of Motorcycles
No. 51, 7, 1st Main Rd, Pukhraj Layout, Adugodi, Bengaluru, Karnataka 560030
goo.gl/maps/45oERkv4GmhvM7yn9
Ask him to talk less and do work simply blabbering all stuff they will not wash bike properly only if u have TH-cam channel and subscriber they will do work, they services charge will be like BMW & Ducati bike charge simply waste of money self experienced. After serving i unfollowed they channel in all platforms.
How much do they charge for servicing?
Hi, I would like to mention that the main motive of Zoheb bhai is to ensure the best performance of the motorcycle at all times. The service provided by the team at AOM is curated in such a way that the motorcycle can be driven smoothly without any hassles for another 10,000km. Smaller service centres might provide cheaper service but only temporarily give a solution. Good, reliable service anywhere is always expensive.
P.s. he wasn’t blabbering, he was trying to spread his knowledge to other riders and the rest of his team were working on other bikes.
@@debadattabhattacharjee3171 15,795 for servicing , fork service, hande bar
After long time bro why wt happened
Nothing happened :)
The actually stock one is better than this useless plastic mine came for around 28k kms
First comment😍
Thanks :)
Over rated and arrogant staff !!!
Until and unless you own a TH-cam channel with good no of subscribers
Really?
Yes
AOM handlebar is the worst; I changed in my D390 and duke vibrates because of smaller diameter of the handle as compared to the stock one, it’s really overrated and jugaad work. It’s a salesman thing, they try to convince you and make you feel you have a problem. And workers there don’t respect your knowledge; they be like main sab jaanta hoon. 😂
Don't Like Himalayan it's too Heavy n Slow with a sea of its Own problems , 18000kms crossed No coneset Problems with My Dominar400.
Art of motorcycle broo,, i changed my highness bikes full chain sprockets in just 13k broo, what to do broo 🥹🥹