I dont think it was but you never know! Also, We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART Pocket Blow Gun- FREEAIR Fastcap GluBot- FREEBOT Knee pads- FREEPADS Blum tape measure- FREETAPE Blum Screw driver- FREEDRIVER Blue Light Safety Glasses- FREEVISION
Installing cabinet hardware is not an emergency. Even if your wife says it is. Just buy a $20 jig. Even with a speed square, a level and drilling slightly larger holes to make adjustments it's too time consuming and level of precious too high. Even if you measure perfectly your drill holes can not be off in any direction. Consider your cabinet s might not be level horizontally and vertically. Same with the doors. Especially for a vertical
You are very welcome! We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART Pocket Blow Gun- FREEAIR Fastcap GluBot- FREEBOT Knee pads- FREEPADS Blum tape measure- FREETAPE Blum Screw driver- FREEDRIVER Blue Light Safety Glasses- FREEVISION
I was gonna say…;-p, a few of em looked crooked! The jig is the secret, but use a square versus the tape when possible and never ever drill a door that is closed!!!!
I am trying to reinstall the same bar handles. The company that sold me the house put screws in that are too long so the “housing-the two legs attached to the handle”from the handle separated and you can’t get the screws out so you can install new handles correctly. Any quick fix?
You would drill all the way through with a 3/16" drill bit like this one- www.woodworkerexpress.com/bosch-b14602-brad-point-bit-3-16-dia-3-1-2-overall-length.html
But if you do decide to get a templete, We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART Pocket Blow Gun- FREEAIR Fastcap GluBot- FREEBOT Knee pads- FREEPADS Blum tape measure- FREETAPE Blum Screw driver- FREEDRIVER Blue Light Safety Glasses- FREEVISION
Fail to see why people are suggesting a level for a handle. It'd be crooked to the cabinet using a level, unless the cabinet is fine in which case a level isn't needed.
@@Woodworkerexpress LOL! I'm just playing, it's not a difficult task but a crafty one for sure. Just the thought of poking the hole wrong is nerve wracking🫣 😂
I blame the webcam! LOL. The camera stretches the room to get a wide angel shot and distorts everything. I looked at it in real life and the handles are all pretty much perfect. But they doo look crooked in the video, you are absolutely correct!
This doesn't show the inside of the cupboard which can loose facia as the drill comes through. So too much being clever on the outside, not thorough enough on the inside of the cupboard.
3/16" drill bit and We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART Pocket Blow Gun- FREEAIR Fastcap GluBot- FREEBOT Knee pads- FREEPADS Blum tape measure- FREETAPE Blum Screw driver- FREEDRIVER Blue Light Safety Glasses- FREEVISION
No, i haven't tried that! We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART Pocket Blow Gun- FREEAIR Fastcap GluBot- FREEBOT Knee pads- FREEPADS Blum tape measure- FREETAPE Blum Screw driver- FREEDRIVER Blue Light Safety Glasses- FREEVISION
It really is, just the camera was set on wide shot and warped everything. ALthough the video is getting views thanks to that warp so ill take the crooked!!!
Waste not want not! We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART Pocket Blow Gun- FREEAIR Fastcap GluBot- FREEBOT Knee pads- FREEPADS Blum tape measure- FREETAPE Blum Screw driver- FREEDRIVER Blue Light Safety Glasses- FREEVISION
That handle looked mighty crooked 🤔
lol all of them actually lol
Lol I thought I saw it crooked and then boom I saw the commentaries confirming
All of them 🥴
Parece que las instalo con el culo
Same.
Thank you so much. I never put handles on before and I’m building a tiny home and you were a great teacher.
This worked perfectly for me. Thanks!!
Create tips! Thank you!
Nice work! You made that look like a pretty easy project that I could do myself.
The first one you did looked crooked to me. That would drive me crazy.
I dont think it was but you never know! Also, We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
it's the shadow/light reflection on the top that makes u think it's crooked. It's brighter at the top and dark at the bottom
I see that too
It's not crooked. The set came from a studio used to film episodes of Batman.
How do you know size of hole and how deep to drill?
Yep!!! That TP jig is an awesome jig!!!
Great work. plz can you tell me what is the bit size you used for hole
What size was the drill bit? How do you know which size is the drill bit to be? Great job!
Thanks! You can use a 3/16" drill bit. Here is one -www.woodworkerexpress.com/bosch-b14602-brad-point-bit-3-16-dia-3-1-2-overall-length.html
Installing cabinet hardware is not an emergency. Even if your wife says it is. Just buy a $20 jig. Even with a speed square, a level and drilling slightly larger holes to make adjustments it's too time consuming and level of precious too high. Even if you measure perfectly your drill holes can not be off in any direction. Consider your cabinet s might not be level horizontally and vertically. Same with the doors. Especially for a vertical
it is an emergency, I'm pulling the cabinet drawers off track 😆. But I guess my husband agrees with you.
To the point. Good video
Appreciate it!
This will change your life.
Great job
Thank you!!
Great video
Thank you! 😊
You are very welcome! We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
Tank for help me
What about when doors are not even but you still want handles still even
You think if I put a laser line on it it would be more straighter🤔
I was gonna say…;-p, a few of em looked crooked! The jig is the secret, but use a square versus the tape when possible and never ever drill a door that is closed!!!!
Thank you!!!! 🙏
Thank you. Very helpful info.
Glad it was helpful!
I used a template on my install
Ty
YW
His wide angle lens did that 😂
3:30 is it out of plumb?
Nice job but your door pull is crooked, why not make or use a template? Much, much faster and more accurate.
What is crooked?
I am trying to reinstall the same bar handles. The company that sold me the house put screws in that are too long so the “housing-the two legs attached to the handle”from the handle separated and you can’t get the screws out so you can install new handles correctly. Any quick fix?
not sure if i understand the question.
Great video! Does it have to be the blue tape? Also, I only have a sharpie with a thick point end. Can I use a pencil instead?
Great questions! You can use any color tape that your heart desires and a pencil is probably a better choice actually.
Thank u 🙏
good job. those are HUGE handles! lol
Yes they are!
How about a right handled ruler & a jig?
How do you know how deep to drill? What drill bit size did you use for the holes?
You would drill all the way through with a 3/16" drill bit like this one- www.woodworkerexpress.com/bosch-b14602-brad-point-bit-3-16-dia-3-1-2-overall-length.html
I hold my bits up to the hardware and just eyeball it. If it fits inside of the handles screw holes snug it’s a little too small
Buy a template. No need to waste your time measuring.
But if you do decide to get a templete, We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
You didnt show what you used to predrill the holes.
Handles are crooked. Also, the main thing I needed help with was what drill bit is used. He passed right by that.
Nice job
No it wasn't! That first handle was crooked, or are your eyes out of alignment?!
Fail to see why people are suggesting a level for a handle. It'd be crooked to the cabinet using a level, unless the cabinet is fine in which case a level isn't needed.
why measure every time instead of making a jig that is exact
ROFL< Its wonky, I already know how to do that!
Learning shit like this, gets you laid!!! Ladies love this shit for some reason lol
Lol!!!! Let me guess you do not have a girlfriend? 😅
Actually women like it when men do physical activity!!!!!
Absolutely it does!!
Re-title the video to: How to ruin a cabinet door
😂😂😂
I dont think people will search for that though 😑
@@Woodworkerexpress LOL! I'm just playing, it's not a difficult task but a crafty one for sure. Just the thought of poking the hole wrong is nerve wracking🫣 😂
Never been more Confused ever
Bruh, that handle was crooked as shit. Fail…
I blame the webcam! LOL. The camera stretches the room to get a wide angel shot and distorts everything. I looked at it in real life and the handles are all pretty much perfect. But they doo look crooked in the video, you are absolutely correct!
This doesn't show the inside of the cupboard which can loose facia as the drill comes through. So too much being clever on the outside, not thorough enough on the inside of the cupboard.
Damn, those handles are crooked as Hell! I'm thinking he should have used the fancy pull guide! Too funny.
What size drill bit did you use?
3/16" drill bit and We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
That's the same question I had... Had to fish thru the comments, like I assume many others did as well...
3:19 is crooked… I thought it could be the camera but the tape is off and both holes are in the middle of the tape.. it’s definitely crooked
Hmmm... I'm beginning to think this video should be added to a #flatearth playlist
No level on it?
No, i haven't tried that! We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
Came over from the Funny Carpenter.
Thanks for coming!
شكرا
Those drawer handles look super wonky!😅
Which ones?
Ha! It wasn’t even! Use a level folks and be sure to line your holes up. Make sure your door is also level.
Does a how to video, and puts them on crooked.
Incompetence is astounding ...
Why did they use floor tiles on the wall. That doesn't look good.
Use a square or atleast a level next time lol
Why demonstrate and put the handle on crooked 🤔 .....😅
Crooked handles are the new trend, didn't you know?
No level?
Ahh it’s crooked!!
This is what not to do. You got a measuring tape and no square? Guessing is dumb
Always use a level people, and get a pics of cardboard, cut it and use that as your pilot. Don’t do crooked shet
Whats shet?
Is it just me or did that handle look super skew?🤣
NEVER EVER MAKE MEASUREMENTS LIKE THAT!! Always make a model with hard cardboard, or wood, and practice on scrap wood before on actual surface.
Homie skipped the whole drilling part
You made it too difficult for me
Crooked as hell.
It’s not straight! 😂
It really is, just the camera was set on wide shot and warped everything. ALthough the video is getting views thanks to that warp so ill take the crooked!!!
All of them look crooked probably more of a good salesman than a handyman lol
bro WTF was that first handle lmfao
Bro, it’s crooked. Are you serious????
The blue tape is slanted and so is your pull. Is this a parody? Lol
Crooked
The handle isn’t even straight
Are you sure?
Holy cow. You butchered that
The guy below has money to waste 😃
Waste not want not! We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
It wasn’t straight 😂
😂😂😂 right
This is so confusing
Lmao The Handel was crooked…. Dude delete this video
*handle was perfect!
Lol, that was bad.
It looked crocked, really and too much mathematical, 👎👎👎 my wife makes it better and faster
Crooked installation lol
Bent as fk lol
Thatz how we roll
Looks like shit. They make jigs for common size handles and pulls. Lowes or home depot have it
Thanks for watching! I really hope this video helped you with your handles