Tutorial Headlight restoration steam kit (acetone)
ฝัง
- เผยแพร่เมื่อ 18 ธ.ค. 2020
- Headlight restoration on Mitsubishi Lancer evolution x
Wet sanding with 600 - 800 - 1200
Coating with acetone steam kit
Not using polish or any clear coat and the light are back for brand new with 2 years protection
Homemade easy simple and fast to do by yourself with following this tutorial
Cars car jdm Mitsubishi
![[MPD직캠] 베이비몬스터 치키타 직캠 4K 'LIKE THAT' (BABYMONSTER CHIQUITA FanCam) | @MCOUNTDOWN_2024.6.13](http://i.ytimg.com/vi/h99J4vWm7Ew/mqdefault.jpg)
That was like something you would see in those oddly satisfying videos. That was amazing to see. They look like they are new parts once again.
Great job, thanks for posting, now I understand how to use my kit. Good video.
This is a good trick never saw this one
You receive the same resuts using a hot air gun on high heat, low blow, without having to use volatile chemicals.
Sand the headlight going down to 1200 grit, then use the heat gun moving in small circles.
I finish the process spraying the headlight with a UVC clear coat to give the headlight some protection.
It is not a totally permanent repair, might last a couple of years depending on your location
Can u use normal 100% acetone or does it have to be headlight specific solution???
Thanks.
It's just acrylic, whatever you did, polishing the surface will damage the OEM UV protection layer, this vapor will survive at least one year in FL or more than two years in NY depending on how much UV is in the environment, to extend the lifetime of it, put protection film with UV coating on it only if your headlight not running at high temperature, or you can spray UV coatings like Megiuar on it.
The first thing I do after cleaning headlights is I buy cheap UV window tint and pase it on there and trim with a razor and it get's protection for a good 5 to 6 years before the tint starts to peel and flake off, but no worries, peel the tint and re-apply it. The headlight under the tint is 100% clear. UV tint does not get hazed or yellow because it has UV protection.
Havent heard such bullshit in some time. Have you ever heard what ceramic coating is? No? I can tell.
@@user-fi1xu1pp7p yes that works perfect for most headlight with low temperature， be careful for high temperature headlight such as
Xenon, with film it will generate hair-tiny cracks on the acrylic.
@@Brancuu so called ceramic is just bullshit, is nothing related to real ceramic, out of data stuff, it’s nonsense, nobody use that on luxury car, you can play it at home for 20bucks
@@jingzezhao4668 there are way more expensive and protective coatings. Also, few bucks for ppf.
Hello from Canada how did the headlight look after a couple of months and wear can I get that kit
Hi, still looks good after years. Idk from Canada and any others country
Normal su buharı mı içinde farklı üründe varmı?
The same question... Where can I get the acetone heating mug with the special lid
Any good hardware store
Hi Sir, very good video, it is very usefull. Can you give answer for my quastion? Is it Only Acetone vapour? Or any thing mixed with Acetone?
Bro...great video... I am from India...how can I buy this equipment?
Thanks bro for your comment, happy if you like it. You can come on Instagram and we can talk for the item you want to buy.
Join me here please @nonoeuromotors (Instagram)
@@nonomotors Thank you so much bro!!!
Acetone vapor removes sandpaper scratches? I do this with cutting compound and a rag.
can do like you do as well
@@nonomotors What if you polish -> steam -> seal with ceramic coat ?
Que tipo de acetona
Awesome video mate. Was just wondering, can I use any acetone for this?
Hi mate thanks for your comment. Bro the product I use is acetone base
@@nonomotors Is this not isopropyl alcohol?
@@nonomotors no it's synthetic rasin and toulene
@@georgenooner lol it's synthetic rasin and toulene.
@George Nooner except headlights are clear coated, and that's what uv waves break down, the clear coat. Simply buffing that clear coat would yield the same results. If the clear coat is completely faded you have to sand and re clear coat otherwise the bare plastic oxidizes super quickly without the uv protection of the clear coat.
Is it also possible to use simple acetone instead of the liquid polymer generally sold with the kit? Are there no differences?
Acetone clouds the plastic really bad!
Awesome video dude I'm in America. How can I get that steamer, I've looked everywhere. Can't find a steamer without high pressure. Your help would be greatly appreciated.
It's basically a metal can that holds acetone, a funnel, and a small fan...
@@calebdrake3544 I thought the can gets hot so it evaporates the liquid?
Can of redbull heatgun and piece of pipe there you go mate :)
@Malik waqas Read my comment above that steam is acetone...do only outside or well ventilated area
Aliexpress
Wc types of acetone u using
What do you seal it with after the acetone vapor treatment?
Don’t need to do anything after you put the steam is done
I wrapped mine in anti scratch film afterwards.
@NONO Motors if you use acetone, you really should put a plastic sealer on. It would last a decade vs 2-3 yrs
@NONO Motors If you don't they will be yellow soon after without any protection.
would this work on taillights as well?
Yes can work, for example the Mini Cooper R50
what do you use to scrub with the sandpaper in the beginning?
just water
Are you using acetone ?
Hy friend! How many liquid do you need for one pair of headlights?
Hi bro thanks for your comment. You can fill up half of the cup with the liquid to coat your light. The liquid who is still in the cup after you done the job, can be put back in the bottle and use for next time 👍
What the name of the liquid? Is not acetone
Hello
now what does your headlight look like? yellowed back?
Still clear mate
@@nonomotors what about now
@@6kbps😂😂
I have 180, 280, 360, 600, 800, and 1200 grit paper
What grit should I use and how many passes should I make
if you start with the 180 is gonna leave big scratch, start with 360 it's good enough
what fine sandpaper number?
is the shining long lived or short lived??
Long lived for years
Hi. How the lamp is looking like after a year? Is it still nice or it was just for a while?
Hi yes still looks clear after years
@@nonomotors did you put any UV protection after?
I am 14 and i want to start making money and i think thats good idea to polish headlights
yes it is
what was that inside the mug?
Acetone liquid chemical
Is the Really normal acetone
I want to know the same.
So its only 600-800-1200 grit?
Yes that’s it
Where do you get the tool to apply the acetone vapor? Thanks.
can find this anywhere online
I can't, do you have link?
Great video
HELLO SIR IS THAT POSSIBLE TO AVAIL A KIT IN INDIA..?
Hi Amazon is the one
I cannot see how this is protected from further oxidation. You need to top coat it to prevent oxidation. Excellent clearing technique, though.
it didnt. the sanding took away the faded dry plastic layer on the outside, the finer and finer sanding grits removed the scratches created by the paper used before. He said to take it to 1200 wet/dry and then he used the steamer. I have polished lots of plastics over my years and its amazingly simple. I use water and a couple drops of dish soap while sanding. Removing the gloss is what you are after at first, then making scratches from the paper smaller. I use buffing compound and a few shop towels to buff the shine back. It takes a little elbow grease. BUT, the lenses will eventually go dull once again but it will take more than 2 years and this guys warranty will have expired by then if you could ever find him again.
Where can i buy the kit ?
Is this only aceton?
Yes is steam product with acetone
Does the container that evaporates the acetone gets hot or it just has a fan inside?
Getting hot yes a bit, that’s why you’ve handle on it
@@nonomotors I see. Can I get that liquid in my local hardware store?
@@LOV2XRL8RL walmart, be very careful with it. It is very strong
@@Seadoo1 Thank you
all the other videos I've seen use acetone doesn't work.... what did you do to get it to work???
Hi thanks for your comment just check my TH-cam channel you’ll find full tutorial of headlight restoration :
Just copy the title under, in your search bar. Hope is gonna help you
⬇️here it is⬇️
TUTO rénovation de phare super facile à la maison 🏠 // Mercedes E63 AMG 🏎
Soak the sandpaper a few minutes in water before using and you’ll get better results.
Any link to that kit?
Hi mate I’ve just asked the supplier if he can send link for the channel.
Keep in touch with you bro
My painter put paint clear on the lamps and I sold it after 5 years and still like new
Yes check my others videos, it's one with clear coat spray on it. Last 5y plus
How long does it last?
approximately 2 years
is it 600 first?
400 first or 600 if not too bad the light
it that water you using while sanding?
yes water
How many grades of sand paper do you use?
They are all wet and dry paper?
Start with 400 then 800 then1200, 1500, 2000 grade paper.
Use water or windowline cleaner with the sand paper?
How much cap liquid do you put into the cup?
How long do you heat it for??
Thank you wayne
is it really acetone? How is the Headlight after two years?
Yes it’s still looks great
@@nonomotors someone says that it needs to be coated with a uv protection varnish, what do you say abou it? i will try with my car, i live in a sunny part of latin america...so i would like to know if i need to do this too.. thank for sharing your knowledge
@@user-cl1nc7kb1y
Hello thanks for your comment. Yes you can put the extra protection over the top 👍
@nonomotors what kind of protection? Give me names
@@HappyMessenger-jg5ig Meguiar's Aerosol Keep Clear Headlight Coating.
How long it lasts? Do you have update now?
hi thanks for the comment. you are ok at least for 2 years
@@nonomotors perfect!
Where can i buy this kit
DM me on instagram @nono.motors
I am from India...how to buy
Amazon
What is the liquid
it's a blue liquid don't know what is it
How do I make a steamer for the acetone
Intrusting 😉
I'm hearing some say this is Chloroform not Acetone?
Yes
thanks for your comment
how long did it last?
For years
Tiempo de brillo
Thanks for your comment mate hope you like it
how long it last?
Approximately 2 years
Can you put ceramic coating on top of it ?
Buy aftermarket glass headlights they don't get hazy like that
And what place you get them? This isn't the 50's maybe you should get cracking with your entrepreneurship making them.
How can it possible..😢
Acetone melts the plastic
@@anguslean4058 Is it safe to use on plastic headlights?
@@mbz4652 yes
That’s what it’s for
Best to sand the headlight from
600
1000
1500
2000
3000
5000 if you really want the best looking
Most just go up to 1200 grit
I think 3000 is better
Also the liquid is acetone
Get 100% pure acetone
Any hardware store has it
Only fill the cup 1/3 and don’t spill it on the headlight.
@@anguslean4058 Thanks for the answer and advice. I heard a lot of people saying that using acetone on plastic headlights could ruined the surface of plastic and even dissolve plastic entirely. But I think that this is the case if you use acetone directly on plastic not if you use a steam machine
@@mbz4652 yep
This works
I got one off Amazon for 25 bucks
If you take your time and sand it correctly
It comes out really nice
But if it’s an old worn out piece of junk with all kinds of cracks and garbage on the inside
You can’t do much
300 seems to be the sweet spot but I have seen people go even higher
I guess if it’s a high end vehicle you might want to go higher
Most of them are stopping at 1200 and then using the vape machine
Don’t use nail polish remover it has other chemicals in it
Stick to 100% or as close as you can get to pure ethanol
Also you could put a cuzzi ( foam insulated cup holder) on it to help retain the heat
Don’t over fill it and don’t spill drops on your headlight
Now I know from whom audi stole headlight desing
This is not acetone but synthetic rasin and toulene.
thanks for your comment
Your video is being used in the background of a joke called the missing wife
Waste of time
Intrusting 😉