Thank you for the great videos, I’m waiting for my Royal 650 to be delivered tomorrow 4/10/23 so I’ve been binge watching all of them. Again thank you from San Luis Obispo,California.
Hello Alex, thank you for this content and you're really very professional, may i ask you how to change the currency in the bill acceptor from USD to another currency?
Appreciate the video, but i do have a question. Do you need a mdb bill validator and mdb coin mech for nayax card reader to work or can you just connect from the board straight to the card reader?
You can absolutely run a complete cashless system. Just connect the MDB coming of the board directly to the Credit Card Reader. This is one of the reasons why a credit card reader is placed first in line.
Hello, Thank you for the video. Can we use this system of 3 payment methods at the same time for chair massage vending ? Secondly, how can we set the choice of time during the massage related to a certain price to pay ? Thank you in advance
If the massage chair system used the MDB protocol as it monetary interface. I don't see why not. I have never worked on a massage chair as this is in a different segment of the coin operated industry.
@Vending Machine Support I am integrate our Cashless Device to AMS Vending Machine. I get into trouble that there is only 17 second left for us before we got the Vend Cancel from I got the Vend Request. Is there any setting on the Vending Machine to adjust such interval? Your help will be really appreciated!
THANKS ! I got some trouble connecting a CardReader Ingenico SELF2000 to my NECTA SNACKY RY compatible with EXE/MDB but seems too old to communicate with the CR, so I'm trying to make it communicate via the Coin mecanism NRI currenza C2 that seems also too old, do you think it would work with the MEI 7900 or CPI Gryphon ? thank you (I succeed plugin bill acceptor either on exe or mdb it work in all case but not CR)
Alex; Are there much differences between food/beverage vending machines and ticket vending machines at transit, rail, subway stations? I watched your videos about connecting credit card, bills, coins to MDB via Y harness, thermostat close ups, 5 tools, voltmeter videos. Aedin
I have a wiered situation my bill validator accepts the first 3 bills but no more but also it hold the and registered the amount The light in the back flashes 2 which means system disabled
Most likely. A nine pin connector from a dollar bill acceptor is the older style pulse / serial interface. This is not compatible to the six pin MDB connection.
You can have up to 8 bill acceptors configured in theory. Something you would know if you had bothered to read the MDB/ICP protocol specification like everybody else here.
hi alex is there an email i can send my questions to ? if not here is the question i want to buy a bill acceptor but i don't know if there any that support my country currency and that is ( syrian pound) pls help
Thank you for the great videos, I’m waiting for my Royal 650 to be delivered tomorrow 4/10/23 so I’ve been binge watching all of them. Again thank you from San Luis Obispo,California.
Congrats on your Royal 650. I hope these videos will help in operating your drink vending machine easier. Thank you for watching!
Wonderful & informative. Thank you. Quick question: why "Credit Card Acceptor" has to be first in the line?
Your content is priceless. Please keep them coming!
Thank you so much for your kind words.
Thanks Alex, you always come through. I appreciate your professionalism, and timely manner!
Thank you!
I LOVE your videos. very concise explanations. I just got 6 vending machines for free! time to learn how to service them.
Hello Alex, thank you for this content and you're really very professional, may i ask you how to change the currency in the bill acceptor from USD to another currency?
All your videos are useful Alex thank you very much
Hi. Could you create a video about upgrading an older vending machine that lacks a motherboard to be upgraded, to receive card payment.
Thanks Alex for all your great content. Could you make a video on how to make DN 501 E give back dollars or change in settings?
Great suggestion!
Great video - thanks :) this helped a lot
can you contact the nayax vpos to wifi instead of cell signal?
Appreciate the video, but i do have a question. Do you need a mdb bill validator and mdb coin mech for nayax card reader to work or can you just connect from the board straight to the card reader?
You can absolutely run a complete cashless system. Just connect the MDB coming of the board directly to the Credit Card Reader. This is one of the reasons why a credit card reader is placed first in line.
@@VendingMachineSupport ok appreciate the response
Is it posible to make a vending machine compatible with a card reader even if is not compatible?
Alex what is the adapter (female to female) that comes off the board called ? Board to MDB.
Hello, Thank you for the video. Can we use this system of 3 payment methods at the same time for chair massage vending ? Secondly, how can we set the choice of time during the massage related to a certain price to pay ? Thank you in advance
If the massage chair system used the MDB protocol as it monetary interface. I don't see why not. I have never worked on a massage chair as this is in a different segment of the coin operated industry.
@Vending Machine Support I am integrate our Cashless Device to AMS Vending Machine. I get into trouble that there is only 17 second left for us before we got the Vend Cancel from I got the Vend Request. Is there any setting on the Vending Machine to adjust such interval? Your help will be really appreciated!
Hello Alex
Can the note acceptor and the coin mech be removed and a card reader installed only ?
Yes you can. That would be a cashless system.
THANKS ! I got some trouble connecting a CardReader Ingenico SELF2000 to my NECTA SNACKY RY compatible with EXE/MDB but seems too old to communicate with the CR, so I'm trying to make it communicate via the Coin mecanism NRI currenza C2 that seems also too old, do you think it would work with the MEI 7900 or CPI Gryphon ? thank you (I succeed plugin bill acceptor either on exe or mdb it work in all case but not CR)
Alex; Are there much differences between food/beverage vending machines and ticket vending machines at transit, rail, subway stations? I watched your videos about connecting credit card, bills, coins to MDB via Y harness, thermostat close ups, 5 tools, voltmeter videos. Aedin
I do not have any experience with ticket machines and other equipment like that question.
Dumb question: is MDB only used for payment or also used for controlling the servos/motors that dispense the product?
I have a wiered situation my bill validator accepts the first 3 bills but no more but also it hold the and registered the amount
The light in the back flashes 2 which means system disabled
What if there are 2 MDB female plugs coming out of the main board? How would I introduce a cc reader?
Use the MDB plug that is coming off the board that leads to the dollar bill acceptor and coin acceptor if your machine is accepting cash.
What if my 6 pin connector or coming off my coin mech and a nine Is coming off my bill acceptor? Does that mean it’s not compatible
Most likely. A nine pin connector from a dollar bill acceptor is the older style pulse / serial interface. This is not compatible to the six pin MDB connection.
can you hook up more than one dollar bill acceptor
Technically yes you can.
You can have up to 8 bill acceptors configured in theory. Something you would know if you had bothered to read the MDB/ICP protocol specification like everybody else here.
hi alex is there an email i can send my questions to ? if not here is the question i want to buy a bill acceptor but i don't know if there any that support my country currency and that is ( syrian pound) pls help