Mastering Audio Accuracy: SPL Calibration with SACT and Toptes SPL Meter
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Manually calibrating your system has never been easier with the Spatial Audio Calibration Toolkit. Just add an SPL meter like the one from Toptes and your all set! Let's manually calibrate!
#spatialaudiocalibrationtoolkit #spl #hometheater #diy #homecinema
Get 10% off your copy at spatialcd.com/ with discount code: COWBOY10
Order your Toptes SPL Meter: amzn.to/3PvRMAg
Get 10% off til August 31st with discount code: Z9K6DGJF
Join this channel to get access to perks:
/ @hatoraidcowboy
Follow me on Patreon (just $5/month!): / hatoraidcowboy
Affiliate links mean I earn a commission from qualifying purchases. This helps support my channel at no additional cost to you.
--------- SUPPORT THE CHANNEL ---------
ProjectorScreen.com affiliate: www.projectors...?af=hatoraid-af
Emotiva Affiliate link: emotiva.com/?a...
Patreon: / hatoraidcowboy
Amazon affiliate link: www.amazon.com...
If you need premium Home Theater Seats, click on the link below!
Valencia Theater Seating
us.valenciathe...?sca_ref=1237051.IUTJ2FzGwq
Contribute directly via PayPal:
PayPal.me/hatoraidcowboycinema
Get 10% off your copy at spatialcd.com/ with discount code: COWBOY10
I guess I'm not getting why someone would want this SACT disc, when you can just adjust the levels on you processor? What was the SACT doing that you can't do with just level calibration built in?
Depending on the AVR or processor, the tones they play for the levels is not a proper tone. The established standard is band-limited pink noise from 500hz-2khz for the main speakers, and 30hz-80hz for the sub. That's what we use on the Toolkit. On the Denon or Marantz products, the tone they use in the level section is not this. Also, as stated in the other comment, the built-in tones played in AVR bypass any EQ you've applied which can greatly affect the level of that speaker, so EQ should always be taken into account when level matching.
Another one! (Dj Khaled voice) 👊😎 Im jealous of those Arendals!
😁 Right back at you! “I PRECIATE YOU..” (Dj Khaled voice) 👊
Hey bro, I have the sact but have not actually used it yet, I have browsed through it some to get familiar with it. I have a marantz sr 6015 and when I go into the test tones and scroll to the speakers, the pink noise from the receiver is what I hear. I'm I doing it right?
I’m not familiar with the 6015, but you should have a section in the receiver to just adjust only speaker levels. Like on my receiver I can adjust the speaker levels or I can play white noise.
You can probably even pull up an onscreen display from the remote to adjust speaker levels without interrupting your content.
I would recommend playing the tones from SACT and writing down the measurements for each speaker and making note of the differences in level between them. Figure out the level changes you would need to make in order to get them all equal. Add or subtract those from the levels in your AVR.
Thanks for the helpful information!
Just to clarify: The test tones in your receiver will be raw, without passing through the equalization done by Audyssey. Using the test tones on SACT lets you check for proper levels post-equalization. Because of this, the tones in your receiver will not match what you read with SACT, which is why you want to make note of the required changes and then adjust the channel trims in your receiver accordingly. I recommend re-checking levels after making the changes to ensure that things line up as they should. Unfortunately, D&M receivers don't let you make changes to channel trims without the internal test tones playing, which is why you have to take notes of how much change you need when using SACT's tones.
Interesting didnt know that about D&M receivers. Thanks for sharing that info!