Awesome video. Straight shot, to the point with no BS filler. And easy to follow. The icing on the cake was the socks with the flops. Put it right over the top for me !! Good work, and thank you.
What can I say! That I have to give you an A-plus, excellent ability & a great demostration. One way or the other we have to save our planet and this's a great example to follow and apply. Thanks!
Amazing Video. Could you please add the link of all the pieces you got as I would also like to try (not a technical person but still like to try to follow your video). Thank you
I been wondering how I was gunna link my mottor to my back without the paddles spinning. Didnt know I could just add a second gear that easily appreciate the info and u showing us how u do it.
It is very well thought out and done. Congratulations. I have only one small suggestion: mount the gearbox and the original chain. When you no longer have battery power, use the bike by changing the pedal sheets.
Hey,Great video.Trying to emulate this in my bike can you be kind enough the list down the specification of the parts needed for this project ?? So I can go around and shop them ! Thanks a lot in advance !
Here for the same actually. This has got to be the most minimal e-bike DIY I've seen yet! I have a simplistic fixed gear bike and I'd like to convert it to an e-bike without too much bulk.
You could get a lot more performance from that thing with a bigger gear spread (i.e put a larger gear on the wheel). From motor to wheel it looks like the gearing is basically 1:1 so you're not benefitting from any torque multiplication.
Why can't every other video I need be as good as this one? This is perfect, I tried watching something earlier today and the guy kept apologizing for how he had nowhere to put his phone (camera) but "really trying"to make a great video... I thought "no you're not, half the time he was attempting to hold it under his chin so he could use both hands 🤦. Anyway great video man, thank you
Hello, please tell me about an electric bike with a gear motor 350w 24v. I read that from 36v it goes faster and more powerful.Nothing wrong with the motor or controller will not be if I connect 36v. What power is better to choose a controller? If it is not difficult, please write.
I wish that you would have put the motor on the other side or on the front fork. Was it a 21 speed? Try a single speed rear wheel on the front fork and pedal home when you run out of juice. Or go bicycling really far and zoom home with 🔋 power. What do you think 🤔 😏?Very impressive!!!!
@@P4TRICCS In my opinion it wouldn’t be better on the front bc v -makes turning while accelerating wonky -less traction -weight is unbalanced towards the front -less stealthy/obvious it’s electric
Good afternoon, brother! Hello from Kazakhstan. Is that a 36V 4.4mAh battery from a hoverboard? or more mAh? The mAh is not visible on TH-cam, and why the controller is 24V. Am I missing something? thanks in advance.
So i was going to ask why you didn't just put a small box on the rack behind the seat and use that to hold your distribution/supply and battery in it but then i saw you get on the bike in flip flops and it all suddenly made sense. Good job man. I also thought that the phone mount would be used to show mph but that was just for looks? Orrrrrr maybe youll use tye rack for a giant speaker so you can be rollin fresh with a sick system??? Rock on my friend, rock solid
I think I'm liking this solution. The front hub motor kits are quite popular, but all of them need huge (and expensive!) batteries. I'd much prefer to have small batteries that you can switch out, and then charge by solar. And if it's a DIY kit maybe you could hook up the motor current cables to a set of small solar panels to save on the battery a bit. Maybe even charge from the sun while not using it. That would certainly be a neat addition, as even if it's slow to charge, it's still something. And may even be all some people need.
those motors draw so much power, even a 100w solar panel couldn't properly counteract how much power you use (nevermind how huge it would be) so just stick with charging the batteries by using the motor as the main generator
@@themastereal8345 It depends on how much you use it. Like if you have a 15 min journey to work, then charging in the sun for 8 hours, and just 15 minutes back, that'd surely work with a smaller panel. But then again, you may just "borrow" some electricity at work ^^
@@2DReanimation Yeah maybe if your battery pack is small anyways then you can charge it up quicker but I still think your solar panel would be huge to get a sufficient charge
excellent video friend, a question how fast does that prototype bike you made? I await your answer as soon as possible for your attention, thank you 🙏🙏🙅🏻♂️
Amigo te felicito está muy bien tu trabajo pero se necesita mas velocidad entre 30 a 40 kmh creo que hay que cambiar la relación de piñones o las coronas
@@scottbates100 it is plain, the bottom bracket is the axle and bearings that connect the pedals and cranks. Old style bottom brackets have threaded steel cups that screw into the frame, one side is standard thread, the other side is reverse threaded
And youre wheel has a multi chain change differentional axcel. Iff the axcel has 1 sprocket dos a singel Chain wheel ( Sprocket ) also fit that new 2 sprocket? Or is ihe axcel not long enough?
Saludos Cordiales , me llamo mucho la atención los dos piñones que le añadió, y el uso de las piezas como los conectores a la batería y los volantes , si me ayudaría cuales son sus nombres de las aplicaciones que uso en el montaje de la bicicleta, por que quiero conseguir las piezas y aplicarlo en mi bici, si me puede pasar todo lo que hay que conseguir.
Nice job, but it is better to add something so that electricity is cut off from the engine when you press the brakes in order to not create resistance to rotation of the engine if you press the brakes while the engine is spinning because that may damage the engine
Controller will limit the current going to the motor, should prevent it getting damaged. Simple ebike brake lever with a switch in it can be used with that controller to cut off the power when braking.
The motor should be fixed within the frame 'triangle' - hope it won't bend the metal plate under load. I assume there was a reason you did it this way. Cheers.
I agree with the video, even so, I prefer to continue with my bromtom bike with the Aston Rider engine under pedal box, it runs at more than 23mih x for less than $ 300!
i like it and much better if you add the link and the details of the item you added to your bike so that we have the idea what we need to buy so that we can do what you shared thank you :)
Sir 1 question, this kit is belongs to 24v bicycle conversion kit, but you using 36v hoverboard battery.. will it work without any complicates? Great work sir, all the best...
Saludos con mucha Fe de JOACIN MONTOYA INVENTOR DE ESCRITURA GLOBAL. Con una gran idea electrónica dónde todas las personas MUDAS BAN A PODER. Bienvenidos.
This is the best video so far no too much talking just pure logically informative tutorial I love this video.
Awesome video. Straight shot, to the point with no BS filler. And easy to follow. The icing on the cake was the socks with the flops. Put it right over the top for me !! Good work, and thank you.
Much simpler then all those others with welding involved. Thanks
What can I say! That I have to give you an A-plus, excellent ability & a great demostration. One way or the other we have to save our planet and this's a great example to follow and apply. Thanks!
Amazing Video. Could you please add the link of all the pieces you got as I would also like to try (not a technical person but still like to try to follow your video). Thank you
He used a conversation kit that can be bought at any online shops
@@greesybakon9978 can i get a link for one thanks bro
Ok but that kit doesn't come with the 2 pieces that are put on instead of the factory freewheel assembly
Can you tell me those parts please
@@greesybakon9978 oh
Hello,
You are the only one to show the normal mount of the free wheel !
thank you for this ! :)
Amigo te quedo buenísimo, muy buen video, con una batería más potente de más amperaje y seria genial.
I been wondering how I was gunna link my mottor to my back without the paddles spinning. Didnt know I could just add a second gear that easily appreciate the info and u showing us how u do it.
How expensive are the gear and the motor?
@@Haske1 maybe 130usd
It is very well thought out and done. Congratulations. I have only one small suggestion: mount the gearbox and the original chain.
When you no longer have battery power, use the bike by changing the pedal sheets.
No
Semma attraction bro
exelente....es la mejor adaptacion que he visto....mi admiracion y agradecimiento
Cuanto cuesta ese Kid
Best electric bike i ever seen 👍😎 Good job on that bike 👍
Hey,Great video.Trying to emulate this in my bike can you be kind enough the list down the specification of the parts needed for this project ??
So I can go around and shop them !
Thanks a lot in advance !
I need same purpose
Same
Here for the same actually. This has got to be the most minimal e-bike DIY I've seen yet! I have a simplistic fixed gear bike and I'd like to convert it to an e-bike without too much bulk.
Владимир Минка самый дешёвый вариант электровелосипеда на ютубе
Some links to the items would be awesome. Looks like a fun project.
Скачат выдео
I have no idea of where you got those one-way sprockets, but thanks for showing how to take off a cassette!!!
Awsome, very simple, from Indonesia.
You could get a lot more performance from that thing with a bigger gear spread (i.e put a larger gear on the wheel). From motor to wheel it looks like the gearing is basically 1:1 so you're not benefitting from any torque multiplication.
Fantastic, making Bafang work on the rear wheel, I wanna do the same!
great guys ...
very good content👍👍👍
Best E-Bike conversion on the Tube! Congrats! Are the freewheels you use two different ones? Thanks
I also assemble a child electric bicycle from a dynamo wiper and it is very safe to drive
Show de bola muito bom parabéns
out of every youtuber about conversion bike.... only you that show battery installation
I’ve been using my bike with this thing for quite sometime now, going to and from work instead of driving saved quite a bit on gas by doing so
Why can't every other video I need be as good as this one?
This is perfect, I tried watching something earlier today and the guy kept apologizing for how he had nowhere to put his phone (camera) but "really trying"to make a great video... I thought "no you're not, half the time he was attempting to hold it under his chin so he could use both hands 🤦.
Anyway great video man, thank you
Awsome thanks for your help 😁😁😁😁😁😁
Mano te felicito ese motor tiene una fuerza inmensa.
انا اول مرة ارى مثل هذا الدينامو بصراحة جديد وفيه عبقرية
Hello, please tell me about an electric
bike with a gear motor 350w 24v. I
read that from 36v it goes faster and more powerful.Nothing
wrong with the motor or controller will not be if I
connect 36v. What power is better to choose a
controller? If it is not difficult, please write.
I know you can get a conversion kit for around 90 pounds but how much was the battery as I see some for 70 pounds and then some for 200 pounds
I wish that you would have put the motor on the other side or on the front fork. Was it a 21 speed? Try a single speed rear wheel on the front fork and pedal home when you run out of juice. Or go bicycling really far and zoom home with 🔋 power. What do you think 🤔 😏?Very impressive!!!!
I know it's and old comment but can you tell me why would it be better on the front wheel?
@@P4TRICCS In my opinion it wouldn’t be better on the front bc v
-makes turning while accelerating wonky
-less traction
-weight is unbalanced towards the front
-less stealthy/obvious it’s electric
I rather make it all wheel drive
Good afternoon, brother! Hello from Kazakhstan. Is that a 36V 4.4mAh battery from a hoverboard? or more mAh? The mAh is not visible on TH-cam, and why the controller is 24V. Am I missing something? thanks in advance.
it said 4000 mah battery I think
3:58
4000mah. Controller said 36v. Yes, it's a hover-board battery pack.
So i was going to ask why you didn't just put a small box on the rack behind the seat and use that to hold your distribution/supply and battery in it but then i saw you get on the bike in flip flops and it all suddenly made sense. Good job man. I also thought that the phone mount would be used to show mph but that was just for looks? Orrrrrr maybe youll use tye rack for a giant speaker so you can be rollin fresh with a sick system??? Rock on my friend, rock solid
I think I'm liking this solution. The front hub motor kits are quite popular, but all of them need huge (and expensive!) batteries. I'd much prefer to have small batteries that you can switch out, and then charge by solar. And if it's a DIY kit maybe you could hook up the motor current cables to a set of small solar panels to save on the battery a bit. Maybe even charge from the sun while not using it.
That would certainly be a neat addition, as even if it's slow to charge, it's still something. And may even be all some people need.
those motors draw so much power, even a 100w solar panel couldn't properly counteract how much power you use (nevermind how huge it would be) so just stick with charging the batteries by using the motor as the main generator
@@themastereal8345 It depends on how much you use it. Like if you have a 15 min journey to work, then charging in the sun for 8 hours, and just 15 minutes back, that'd surely work with a smaller panel. But then again, you may just "borrow" some electricity at work ^^
@@2DReanimation Yeah maybe if your battery pack is small anyways then you can charge it up quicker but I still think your solar panel would be huge to get a sufficient charge
How can I get the stuff please
Solar is super inefficient I doubt you would be ever able to charge it fully even if you left it outside all day
excellent video friend, a question how fast does that prototype bike you made? I await your answer as soon as possible for your attention, thank you 🙏🙏🙅🏻♂️
How and where can order the accessories motor?
@@jeffreybustillo1187 at Ebay
Where can I buy the motor or the kit??? Nice project Thanks
Podria dar las especificaciones de los componentes? o los links de donde encontrarlos? De verdad que quiero hacerlo!
Mires en ebay
Where can I buy motor electric set ? Can you tell me the store that sale it?
Amigo te felicito está muy bien tu trabajo pero se necesita mas velocidad entre 30 a 40 kmh creo que hay que cambiar la relación de piñones o las coronas
Please how will i get the materials
Parabéns nossa 👏👏 maravilha 👏👏
hi, great video! where can I retrieve the "spacer" thread where the two single free sprockets are screwed? thank you!
From bottom bracket of old crankset
@@scottbates100 it is plain, the bottom bracket is the axle and bearings that connect the pedals and cranks. Old style bottom brackets have threaded steel cups that screw into the frame, one side is standard thread, the other side is reverse threaded
And youre wheel has a multi chain change differentional axcel. Iff the axcel has 1 sprocket dos a singel Chain wheel ( Sprocket ) also fit that new 2 sprocket? Or is ihe axcel not long enough?
Gostaria de fazer na minha bicicleta gastaria quanto? No brasil tem ese mecanico nese tipo de intalacao
Nice video. How’s does it do in cold/wet weather??
Saludos Cordiales , me llamo mucho la atención los dos piñones que le añadió, y el uso de las piezas como los conectores a la batería y los volantes , si me ayudaría cuales son sus nombres de las aplicaciones que uso en el montaje de la bicicleta, por que quiero conseguir las piezas y aplicarlo en mi bici, si me puede pasar todo lo que hay que conseguir.
Nice job, but it is better to add something so that electricity is cut off from the engine when you press the brakes in order to not create resistance to rotation of the engine if you press the brakes while the engine is spinning because that may damage the engine
Controller will limit the current going to the motor, should prevent it getting damaged.
Simple ebike brake lever with a switch in it can be used with that controller to cut off the power when braking.
Be great if u could do a few close ups after u attached motor like round the cogs and how u made the bid bracket plste
ياأخي اين اجد مثلها جزاك الله خيرا
Esse motor e quantos voltos, i quantos watss i ende encontra pa conprár?
En. Cuanto. Sale una. Visicleta. Acis. Varon
Creo que es 24voltos
Would it be possible to install freewheel and motor on the other side of wheel keeping the default gear working?
Yes need some welding
Does the motor get hot and burn when it goes too far after connecting this motor?
The motor should be fixed within the frame 'triangle' - hope it won't bend the metal plate under load. I assume there was a reason you did it this way. Cheers.
Lessprotected to the choc too.
hello,if i use 36v 800w controller but for the motor i use 24v would it be some problem for this diy?
How long did it take to build and how long does battery last?
Very nicely done. I would love to build one. Do you have the links where you bought all the parts?
0WQqqqqeqq..
The hardware store.
@@chotasardar7340 la ferreteria
Amazon is one place, $300, but I bet you can probably get it for $150 or $200 on other websites, though haven't checked.
Brother i am from nepal and i am also excited to make this type of bicycle so could you please tell me how and where i can get this equipment...
hi excellent video but could you show better how the wires are connected to the control unit? Thank you
Please ask, how far is the running time for each battery charge? Thanks you.
What is the cost on turn key basis. Where we can get it and fit it? In Hyderabad any location
Did you have to buy a battery sperately from this kit and if so which one?
Make it charge while it pedals, try doing a stoppie with dat bike, but still. Good work, ill see if i can do sum
Mantap bosku
nice video....greeting from Bali Indonesia, can youshare link where you bought the bldc motor?
I agree with the video, even so, I prefer to continue with my bromtom bike with the Aston Rider engine under pedal box, it runs at more than 23mih x for less than $ 300!
Cool
10 minutes and your done!!
No some parts he speed up
By editing
You’re*
@@Massive_Manchild I'm lazy, how did that apostrophe get in there? I didn't do it
Yacapu❤🎉
Love it.
amazing video but flip flops with socks are crazy
hello, excellent video, the battery is not visible, could you please tell me the characteristics, thank you.
Hi
You can by this on eBay here is how to find it th-cam.com/video/lWWnnkf9CoE/w-d-xo.html
Nice battery pack did you assemble it? Or is this a kit? Excellent work bye the way!!!!
It's out of a hoverboard
Very goodI like this video. Thanks
Never get a wiring right Can you help
Is this a kit or did you get the parts separetly ?
good job bro 💪🏽🔥
what is that black thing you attach to the hub and sprocket to be able to attach another sprocket?
What cog part did you used on minute 2:00. I don't know what it is called. Thank youuu
i like it and much better if you add the link and the details of the item you added to your bike so that we have the idea what we need to buy so that we can
do what you shared thank you :)
Great video thanks! Btw will this work on mountains?
Do you need the bike to be a geared one or a non geared one?
Any bike works
Where do you get the screw on adapter for the one way sprocket see at 2:00 minute. Thank you
is very cheep. I buy pedal component, gears, for this.
are you going to link where you bought these items?
where can I get that double freewheel piece? I am thinking of using that to make a hub motor mid drive ebike. similar to the ones Hanebrink made .
It is the same as bottom bracket axle bearing cup. You can use it from old bottom bracket.
Can someone help me with the part between two wreaths what is that and where can i find it ill be very thankful
I have one it came with the kit.
hello ! Very good job !! one question, what is the name of adapter to you use between the two turnstiles ? where I can find ?
una 6 9
Hello do you understand it
Excelente donde consigo el motor para la bicicleta
whats the name of pice you installed between the 2 freeweels?
wow this is really wow I would like you to put it on a real one like that, can you write what the parts are called
Where can i buy this kit for my bike?
Nice idea but I have a question if the bicycle is on motion the battery keep on charging or it should be charged by charger.
With charger 🔋🔌it's don't have self charge
Prawdziwy elektryk.
V nice work 👍👍👍
Beautiful video tnx
Looks great 👍 and easy to use please 🙏🙋♀️price 😃
Sir 1 question, this kit is belongs to 24v bicycle conversion kit, but you using 36v hoverboard battery.. will it work without any complicates?
Great work sir, all the best...
Будет но недолго
👍👍👍👍Qué chingoneria
can i activate the motor and pedal at the same time?
Nic sir I am Indian
Thank you
Hola, que velocidad máxima tiene ? Hi, what is your top speed?
ดีเยี่ยมจังเลย
Do you have link where you buy everything for it
Saludos con mucha Fe de JOACIN MONTOYA INVENTOR DE ESCRITURA GLOBAL. Con una gran idea electrónica dónde todas las personas MUDAS BAN A PODER. Bienvenidos.
Awesome video.