NOTE: FORGOT TO MENTION WINDOWS 10 GAME BAR. I RECOMMEND YOU DISABLE THIS: Right click on the Start Button at the bottom left of your screen. Go into Settings, and then Gaming. Select the Game Bar on the left. Hit the switch below Record game clips, Screenshots, and Broadcast using Game Bar so that they are now Off. www.techadvisor.com/how-to/windows/remove-game-bar-in-windows-10-3681814/
@@jjvvjj80377 @Niema Ano pretty much disagree with everything you said. Lowering your dpi and raising your in game allows you a greater degree of fine tuning when it comes to making changes. Turning off low latency mode for Destiny has a positive effect for a lot of people (not all. There's something wrong with it on certain setups. Don't know all the details there, so reddit that) Enhance pointer precision should be turned off regardless. It serves no benefit so whether or not Destiny specifically uses raw input or not, there's no reason to have it on.
@@jjvvjj80377 Bungie themselves acknowledge this will in fact help fps and the cost to latency is very minimal/imperceptible. Not likely needed for a 3000 series card though help.bungie.net/hc/en-us/articles/360054418532
@@jjvvjj80377 interesting info on the DPI stuff. Thanks for sharing. Personally, I switched to lower dpi and higher in game and actually noticed improvements, and when I am making a change (let's say 8 to 9), instead of a large change, I get a smaller increment (half)
Played around with some of this settings this morning. Did way better in PvP (not hard I'm bad) and just made my game run so much smoother. Thanks a lot Benny!
I had no idea that I had Enhanced Acceleration turned on, and a couple other things that were fighting against my aim. This has helped me sooo much. You’re a life saver Benny thank you!!
In Nvidia control panel, under "change resolution" you should be using NVIDIA color settings, not default. Also, mouse settings like the Windows "enhance pointer precision" do not affect Destiny 2 due to the way it takes a "raw input". So, unless you hate how it feels in Windows, that's not going to change your aim. What does have an impact is the smoothing that Benny talked about in the XML file.
You have a mistake with low latency value to 0. According to Bungie: To turn off Reflex Low Latency functionality, set the value to 0. This may slightly improve framerate at the expense of latency. Default Reflex Low Latency functionality is enabled when the value is set to 1. When the value is set to 2, Reflex Low Latency with Boost is enabled. This feature overrides the power saving features in the GPU but can provide slight increases in latency reduction.
no. thats not true. you only get lower latency when your GPU/CPU hits 99,99% of most of the time. in my case, with a rtx 3080 i have arround 50-60% so i INCREASE latency if i turn low latency ON.
Missed one setting in Nvidia that can help the mouse feel more responsive. Low Latency Mode On, but not Ultra. Ultra setting had some issues in my testing. This setting will reduce the default 3 frame buffer to 1 frame of buffer. Also- Texture Filtering: high performance Monitor Technology - Fixed Refresh (if you want the lowest input latency)
benny, i was in ur stream the other day and good god your pc is absolutely gorgeous. i’m an xbox player rn and have been since 2014 but i’m building my first pc soon!! i can’t wait to get wrecked in pc lobbies for a month n then start slayin again lol. i’ll be back here once my pc lands.
Thanks for the settings info and I really enjoy all of your videos. Hopefully this can help when I play on my laptop which is just good enough to play on low graphics settings
Good tips. I found and there were things I knew, but forgot to do on my laptop which I’m playing on now since my desktop died. The modifications to the CVARS we’re especially helpful. Thumbs up 👍
btw @benny at 11:54 you have selected: ''Use my preference emphasizing''. If you want to use the settings you configured and just showed us, you should select ''Use the advanced 3D Image settings''.
Honestly, I like my games looking bad. I played CSGO on 1280x960 4:3 for years and I am used to the rough edges of minimal anti aliasing. Less detail makes me play better personally.
You also should always shoot to have as much fps as possible, always above your refresh rate. Not only it will keep the picture smoother with less visible tears, it will improve input lag and will show you information faster if you have V/G-sync off. Better framerates on single-GPU cards greatly reduce lag. Having 500fps = +2ms GPU rendering lag, and having only 100fps = GPU +10ms rendering lag. This means 500fps has 8ms less lag than 100fps, because of the GPU rendering delay.
Btw I have the same monitor as him and you can have 240hz with HDMI you just have to make sure that the cable is HDMI 2.0. Im using it rn and running 240 hz. Also, most monitors will have one standard HDMI port and one port labeled 2.0. Make sure you use the right port.
I wish i could use toggle sprint but it just messes up my slide, sometimes i crouch too soon after activating sprint and it doesnt slide, sometimes i dont realize im already sprinting so when i press shift it un activates it and i dont slide :/
Question: I see you have HDR-output value = 1, I have that too, but I don't have HDR capabilities. Can anyone confirm or deny that I should put this value to 0?
Benny if you wouldnt mind i have 2 questions Is there and advantage between Fullscreen vs Windowed? And do you use an Aim trainer to get cracked aim or is it just experience?
Destiny has some weird fullscreen issues for me. if i set it to 1080p fullscreen on my 1440p monitor, it is always surrounded by a black frame. scaling is set to display in nvdia control panel and fullscreen optimization is disabled. does someone have a solutions for this?
Why using lower quality settings if you have a rtx3090? Tell me that it's not for to see enemies better and having an advantage on crucible/trials please...
@Benny as soon as I change my Nvidia settings to that of which you have and start up my game it keeps getting stuck on the loading screen before the Beyond light logo pops up every time.. Anyone perhaps have a suggestion as to why that could be and possibly offer a solution.. That would be highly appreciated..
FYI: You can also set launch parameters for Destiny 2 inside Steam. Most popular settings are: -high priority -USEALLAVAILABLECORES. Also related to mice dpi; most people set a dpi for gaming and have a seperate dpi for non-gaming. If you set D2 to in-game sense of (1) this will enable you to run Raw mouse dpi, in other words; most people run 400 dpi w/ 8 game sens for an average eDPI of 3200... setting game sense to 1 allows you to run your prefered dpi straight off the system settings, thus allowing you run 3200dpi instead of doing quik mafs inside the game engine. Side Note: Regarding FOV: Bungie has confirmed, max ACTUAL FOV is 101.1 despite having the option to set it to 105. The UI says 105, but really its 101.1 because of game engine limitations
Hello Benny, I took over your settings, but massive input lags, I've already tried to fix it with g sync and freesync, it's not better, maybe you or someone in your community have a solution, I use the Rayzen 9 5900x and Rtx3070 suprime x work memory 16gb 3200mhz
Try turning the low latency mode back on by setting it to “1” or “2”, Benny mistakenly advices you to turn it off when it’s actually a very good feature for latency
Is it just me, or are the critical comments on this video getting deleted? There has been at least two comments I've personally seen that were disagreeing with the video and offering their own advice, but they seem to be gone now.
@@BennyShmurda Ah ok, I didn't actually get to read the replies on it, I just saw the main comment itself. By the time I clicked to view the replies they wouldn't load cause it had been deleted.
@@Valyrus. Yeah, pretty helpful feedback unfortunately presented badly so got rid of it because it was overly negative, "Dumpster fire". "failure". etc. Don't really have time for negativity on that level as it'll only lead to issues once my regular viewers started replying to it so took it on the chin, changed the title and moved past it :)
beeny maybe u dont rememebr mebut u took my gf flawless with sirD but my girl edits for luckkyy10p and shes was super intrested in editing for you ..we have both said it before that you deserve more subs maybe u would be intreseted in that let me know
NOTE: FORGOT TO MENTION WINDOWS 10 GAME BAR. I RECOMMEND YOU DISABLE THIS:
Right click on the Start Button at the bottom left of your screen.
Go into Settings, and then Gaming. Select the Game Bar on the left.
Hit the switch below Record game clips, Screenshots, and Broadcast using Game Bar so that they are now Off.
www.techadvisor.com/how-to/windows/remove-game-bar-in-windows-10-3681814/
What does windows 10 game bar do?
Thank you 🙏
@@jjvvjj80377 @Niema Ano pretty much disagree with everything you said. Lowering your dpi and raising your in game allows you a greater degree of fine tuning when it comes to making changes.
Turning off low latency mode for Destiny has a positive effect for a lot of people (not all. There's something wrong with it on certain setups. Don't know all the details there, so reddit that)
Enhance pointer precision should be turned off regardless. It serves no benefit so whether or not Destiny specifically uses raw input or not, there's no reason to have it on.
@@jjvvjj80377 Bungie themselves acknowledge this will in fact help fps and the cost to latency is very minimal/imperceptible.
Not likely needed for a 3000 series card though
help.bungie.net/hc/en-us/articles/360054418532
@@jjvvjj80377 interesting info on the DPI stuff. Thanks for sharing. Personally, I switched to lower dpi and higher in game and actually noticed improvements, and when I am making a change (let's say 8 to 9), instead of a large change, I get a smaller increment (half)
Played around with some of this settings this morning. Did way better in PvP (not hard I'm bad) and just made my game run so much smoother. Thanks a lot Benny!
I had no idea that I had Enhanced Acceleration turned on, and a couple other things that were fighting against my aim. This has helped me sooo much. You’re a life saver Benny thank you!!
As someone who has just moved to PC a few days ago this was super helpful!
In Nvidia control panel, under "change resolution" you should be using NVIDIA color settings, not default.
Also, mouse settings like the Windows "enhance pointer precision" do not affect Destiny 2 due to the way it takes a "raw input". So, unless you hate how it feels in Windows, that's not going to change your aim. What does have an impact is the smoothing that Benny talked about in the XML file.
Yessir I’ve been waiting for this 😀 now it’s time to play like Benny 😈
Nah u definitely wont
Dang
Messed up
This is what I’ve been waiting for from you man! You are my favorite destiny player! Thanks for the video.
Just ordered my pc so this will help a lot thank you Benny! See you in stream 💚
Just want to say that I love your gameplay and appreciate you putting up videos on such a constant basis. One of my favorite pvp’ers to watch!
You have a mistake with low latency value to 0.
According to Bungie:
To turn off Reflex Low Latency functionality, set the value to 0. This may slightly improve framerate at the expense of latency.
Default Reflex Low Latency functionality is enabled when the value is set to 1.
When the value is set to 2, Reflex Low Latency with Boost is enabled. This feature overrides the power saving features in the GPU but can provide slight increases in latency reduction.
no. thats not true.
you only get lower latency when your GPU/CPU hits 99,99% of most of the time.
in my case, with a rtx 3080 i have arround 50-60% so i INCREASE latency if i turn low latency ON.
I finally got to use my PC again and have had this video in my watchlist for the past 8 months
Missed one setting in Nvidia that can help the mouse feel more responsive. Low Latency Mode On, but not Ultra. Ultra setting had some issues in my testing.
This setting will reduce the default 3 frame buffer to 1 frame of buffer.
Also-
Texture Filtering: high performance
Monitor Technology - Fixed Refresh (if you want the lowest input latency)
Just getting back into destiny and I switched to mouse and key a couple years ago, this video was very helpful, thank you man!
benny, i was in ur stream the other day and good god your pc is absolutely gorgeous. i’m an xbox player rn and have been since 2014 but i’m building my first pc soon!! i can’t wait to get wrecked in pc lobbies for a month n then start slayin again lol. i’ll be back here once my pc lands.
thank you for this man for real the mouse smoothing/latency thing i never would’ve figured out and it feels soooo much better now
About that "Enhance pointer acceleration"... I had no idea I had that on and after I turned it off moving my mouse feels so weird haha.
It will definitely take some time to adjust to, but once you have adjusted hopefully it will have your aim feeling more consistent than ever :D
Same happened to me back in 2017 but now my aim is so much better
Thanks for the settings info and I really enjoy all of your videos. Hopefully this can help when I play on my laptop which is just good enough to play on low graphics settings
Dude thank you so much. Ive been wondering so long. There was so much in this i didnt know already and have been playing since launch.
I am just glad I am able to get 1.7 K.D. in Crucible with my pc barely being able to maintain 60 FPS.
Meanwhile as a controller player:
"We got 7 sensitivity and traction equipped...yep that's it lol."
Too real 😭
9 sensitivity
Nah, I got max with traction and still feel slow as shii, pain.
7? Even 10 feels slow. I need 12 on my series x
@@philmcrack3038 exactly it’s so slow
dude he went IN on this
so handsome
Came in just expecting edpi in game sens etc but learnt so much more 😲
Good tips. I found and there were things I knew, but forgot to do on my laptop which I’m playing on now since my desktop died. The modifications to the CVARS we’re especially helpful. Thumbs up 👍
btw @benny at 11:54 you have selected: ''Use my preference emphasizing''. If you want to use the settings you configured and just showed us, you should select ''Use the advanced 3D Image settings''.
You can absolutely get above 60hz using an HDMI cable from your monitor to GPU by the way
I thought I knew everyting about this, and I was wrong. Thank you bro
Honestly, I like my games looking bad. I played CSGO on 1280x960 4:3 for years and I am used to the rough edges of minimal anti aliasing. Less detail makes me play better personally.
You also should always shoot to have as much fps as possible, always above your refresh rate. Not only it will keep the picture smoother with less visible tears, it will improve input lag and will show you information faster if you have V/G-sync off. Better framerates on single-GPU cards greatly reduce lag. Having 500fps = +2ms GPU rendering lag, and having only 100fps = GPU +10ms rendering lag. This means 500fps has 8ms less lag than 100fps, because of the GPU rendering delay.
Right on good info. Thanks
anti ailising just makes the image blurry
I find this so interesting and I don’t play on PC - thanks Benny. Love you’re videos and stream.
you can bind block and mele as the same key it helps alot esp on rear thumb button. (its m4 on synapse)
The dream set up! Evolve makes good builds for the most part
Thank you for your time dude
Amazing video man. Helped me so much
There is also a programm called timer resolution which also lowers your mouse pointer lag
Great Video Benny Lad thank's very much Brother!!!
You are legend bro, thanks
Console reticle position does help with hand cannon recoil muzzle blocking. I play on PC but prefer the console setting.
Cant wait for the character builds btw
thanks a lot benny this has been super helpful :)
Awesome video. Very useful
Btw I have the same monitor as him and you can have 240hz with HDMI you just have to make sure that the cable is HDMI 2.0. Im using it rn and running 240 hz.
Also, most monitors will have one standard HDMI port and one port labeled 2.0. Make sure you use the right port.
Thanks, Benny. Very cool.
Benny thanks for this video, and I play better by the Settings
Goat
Can’t see the crimson sight if you are above 95 fov it can make or break a guns performance
Thank you !
Nice trim
Setup tour when?
How can i Bind Rift and Icarus Dash on the same button? I know it's possible in Destiny CFG, but how exactly?
Now I will be good as Benny
Hey benny i know im late to commenting but what are your character builds
I do hit G to finish...
Good Shyt Benny. Now all I want to do is Grind.
What in ears are you using? Looking for some decent one's.
Bit late but the windows mouse settings for pointer precision have no effect in destiny 2 as it uses its own mouse settings
Hdmi does unlock frame rates above 60 htz it caps out at 143 htz.
I wish i could use toggle sprint but it just messes up my slide, sometimes i crouch too soon after activating sprint and it doesnt slide, sometimes i dont realize im already sprinting so when i press shift it un activates it and i dont slide :/
Benny, perhaps you dont need this with such a beast of a pc but aren't u using any steam launch options like -High or -useallavailablecores ?
thnx man
Question: I see you have HDR-output value = 1, I have that too, but I don't have HDR capabilities. Can anyone confirm or deny that I should put this value to 0?
10/10 video
Is that BENQ the ZOWIE XL-2540 ....was checking out the XL2411 @ 144hz...but your running @ 240Hz...!
Destiny 2 setting pvp pad
Now I can be as good as Benny
If only it worked like that
Lmao yeah
You already the 🐐 Remi 💕
@@Lou-xq9br
@@nymbus1111 yesn't
Tanks
i play on 50% render resolution at 45-50 fps and still play the game :")
My deepest condolences.
For cvars its not letting me change anythung
400dpi and 8 in game sensitivity… i turn so slow man i increased it to 16 in game and turned the ads modifier to 0.5
Im just wondering how to dodge as hunter i just moved to pc and i dont know how to dodge
We need an updated version please @BennyShmurda
Benny if you wouldnt mind i have 2 questions
Is there and advantage between Fullscreen vs Windowed?
And do you use an Aim trainer to get cracked aim or is it just experience?
Not 100% sure about this but i do watch benny on twitch and he did mention he used to do aim training for cs but he doesn't for Destiny 2
@@Nana_UFC ok thanks for the response i figured hes done some aim training.
@@duff3633 no problem man, tho i am not 100% sure that what i said is true
Destiny has some weird fullscreen issues for me. if i set it to 1080p fullscreen on my 1440p monitor, it is always surrounded by a black frame. scaling is set to display in nvdia control panel and fullscreen optimization is disabled. does someone have a solutions for this?
How do you counter the 400 DPI in menu screens and Windows 10?
Why using lower quality settings if you have a rtx3090? Tell me that it's not for to see enemies better and having an advantage on crucible/trials please...
Any way that you’re aware of to get a 1:1 ratio for ads sens?
@Benny as soon as I change my Nvidia settings to that of which you have and start up my game it keeps getting stuck on the loading screen before the Beyond light logo pops up every time.. Anyone perhaps have a suggestion as to why that could be and possibly offer a solution.. That would be highly appreciated..
ads sensitivity is 10 and i can only change it from 0 to 1 is that new update ?
do u recommend a high sens for pvp?
what is the name of that shader on hunter?
What about controller ?
FYI: You can also set launch parameters for Destiny 2 inside Steam. Most popular settings are: -high priority -USEALLAVAILABLECORES. Also related to mice dpi; most people set a dpi for gaming and have a seperate dpi for non-gaming. If you set D2 to in-game sense of (1) this will enable you to run Raw mouse dpi, in other words; most people run 400 dpi w/ 8 game sens for an average eDPI of 3200... setting game sense to 1 allows you to run your prefered dpi straight off the system settings, thus allowing you run 3200dpi instead of doing quik mafs inside the game engine.
Side Note: Regarding FOV: Bungie has confirmed, max ACTUAL FOV is 101.1 despite having the option to set it to 105. The UI says 105, but really its 101.1 because of game engine limitations
Ayooo. What’s that all black shader on the hunter?
Dude how do you have so much vram on a 3070???????
Little off topic but it feels like bungie has introduced Sbmm into 6s. Might be worth investigating.
It literally feels like CoD SBMM which pisses me off.
lmao this aged well
just an extra, destiny has a launch option for steam (-USEALLAVAILABLECORES)
the face cam is back 😀
Is he using g-sync on or off?
I found the video let's goooooo
digital vibrance at 100 is crackhead
Debloating your Nvidia Driver is the best thing to do if you want more FPS.
Debloating ?
@@markkuuss it means removing unnecessary files
How u do that?
Hello Benny, I took over your settings, but massive input lags, I've already tried to fix it with g sync and freesync, it's not better, maybe you or someone in your community have a solution, I use the Rayzen 9 5900x and Rtx3070 suprime x work memory 16gb 3200mhz
Try turning the low latency mode back on by setting it to “1” or “2”, Benny mistakenly advices you to turn it off when it’s actually a very good feature for latency
If nothing works then just do a fresh install and all should be fine
1.0 still exist. I am in the US. unless they reverted it just now
Is it just me, or are the critical comments on this video getting deleted? There has been at least two comments I've personally seen that were disagreeing with the video and offering their own advice, but they seem to be gone now.
They were, If you read that thread I said I would be deleting the thread and changing the title as was suggested :)
@@BennyShmurda Ah ok, I didn't actually get to read the replies on it, I just saw the main comment itself. By the time I clicked to view the replies they wouldn't load cause it had been deleted.
@@Valyrus. Yeah, pretty helpful feedback unfortunately presented badly so got rid of it because it was overly negative, "Dumpster fire". "failure". etc. Don't really have time for negativity on that level as it'll only lead to issues once my regular viewers started replying to it so took it on the chin, changed the title and moved past it :)
@@BennyShmurda Fair enough.
so ive been playing at 450dpi and 10 sens .6ads and been doing alot better now is that a weird sens to play on? i play valorant 450dpi 1.0 .82
I know a fair few people that play around those numbers. Weird sense tends to be really high or really low. Yours is definitely low but not super low
@@idfk5885 switched to sense 8 and 1.0 Im not doing too bad keeping over a 2 kd my weekly with that sens has been a 3.2 kda thnx for the reply
@@idfk5885 been wanting to know what ppl think about my sens and how it compares
My sense feels really slow
Now I know why my aim feels different than when I'm playing overwatch. Aim smoothing is on by default regardless of the in-game settings. Wtf bungo.
Let's goooooo
Im literally on lowest settings, 720p and 69% render solutions and i never even reach 60 fps
what keyboard do you use?
Currently Anne Pro 2 with Kailh Box Browns but will be building a custom one soon :D
@@BennyShmurda thanks! any plans set yet for your new one?
@@Green-dj7mq KBDFans D65 Brass Hot-Swap kit, Novelkeys Creams both arrived. Waiting on my GMK Bushido's Group buy and then will start building it
@@BennyShmurda sounds like a great build. good luck!
I'm so used to 800 DPI
Same
Everything arf
beeny maybe u dont rememebr mebut u took my gf flawless with sirD but my girl edits for luckkyy10p and shes was super intrested in editing for you ..we have both said it before that you deserve more subs maybe u would be intreseted in that let me know