You are right sir. In pakistan, very few people do such component level repair. I really appreciate you work. May God bless you sir prosperity and success in both life. Allah hafiz
I think this is the heaviest problem goes to mine.. 3 beeps after 8 or 9 seconds. Have idea for that?. . My case first is yload, i clean all dust and resamble it back, still red light, than i re paste thermal of both ic, still 3 beep red light after 5 second green, and than add more tantalum caps, than it 3 beeps as your case after 9 second.. thats 5 month a go, and today i found it again in the cellar under the cupboard, before i disassembly it again, i found this your vdo 9month ago? 😫😭 So sad i dont have welding machine.. so i give up 🙅🏻♂️🤷🏻♂️🤷🏻♂️ .i should sell it. . So that ic you replace with new one, not reballing it? Does it broken or what? . Btw, your video so complete. This is a real tutorial vdo, step by step, wich is so good, not like others ch, thanks sir, hope you still good well heallthy.. great job 👍👍👍👍👍.. . And the sony manufacture never release their manual service book and troubleshoot for technician beside we must sent it back to the main dealer to send to the manufacture😆😆😆 . Problem solved, welldone 👋👋👋👋👋
Hi I'm also have the same problem tr to repaste the termal but it doesn't work.So I have to follow your step,can u list what item u used in your video?
The CPU and GPU coils should have 1.00 volt in output terminal. If not check for the switching signals on input terminal that is from the PWM chip on the FETs. the PWM chis located at the backside of the motherbord behind the FETs. Verify the bias resistances for the PWM chip.
Hi Kevin! If your PS3 isn’t blinking red three times after the green light and just turns off, it could be a sign of a different issue. I recommend checking out some of my other videos on similar errors on my channel - they cover various causes and fixes for PS3 shutdown problems that might help you troubleshoot this. Good luck, and feel free to reach out if you have more questions!
"Now, I check the thermal circuit." "Now, I turn my oscilloscope to analogue mode." These kinds of sentences that tell us what you're going to do next help us a lot. Thank you for them. I have been watching you videos for several months now, and I've noticed clear improvements: Now, you use very good angles, you explain what you're going to do. You also mention the values that the components should have. The videos are excellent! P.S. Why did ground the component on the other side of the board at 11:32? Did you verify that way that it wasn't faulty? If you did, how does grounding help you conclude that it's not faulty? What a complicated repair! This one took a lot of problem solving to get working again.
I just Ground Tristate to check whether the console was bricked or not and it was not. Because if it would be bricked then the green light says on and no three beeps.
I'm having a very similar problem to the system in this video. Each time it beeps three times and shuts down with the blinking red light. If i repeat this, eventually, the system starts up. Then, randomly during a game, it will shut down with three beeps and the red light blinking again. Any ideas as to what can cause this behavior? I've searched everywhere for a fix, and came across your videos. I really like how you explain your solutions and how you came up with them
hi, top video, i have a ps3 slim cech-2504B, it turns on 2 seconds green led and immediately turns off red led, no other strange noise, i don't know what to check, can you help me thanks
That's so cool >>> (Ice Cream Stick) :D Solve the problem with the ice cream stick hahaha :D why you did not reball the cell? You have a reball station.
Awesome video!! Great patience and deep dive of problems. I have similar red light with beeps... but have a short on the power rail of the CPU and GPU. Any tips please?
This is Way better than the other so-called fixed I saw on youtube, they made it look too simple.
You are the best repairman of PlayStation
You are right sir. In pakistan, very few people do such component level repair. I really appreciate you work. May God bless you sir prosperity and success in both life.
Allah hafiz
mine powers on for a while and beep red light like shown on video
My ps3 slim same complaint ...
Please can help me
I think this is the heaviest problem goes to mine.. 3 beeps after 8 or 9 seconds.
Have idea for that?.
.
My case first is yload, i clean all dust and resamble it back, still red light, than i re paste thermal of both ic, still 3 beep red light after 5 second green, and than add more tantalum caps, than it 3 beeps as your case after 9 second.. thats 5 month a go, and today i found it again in the cellar under the cupboard, before i disassembly it again, i found this your vdo 9month ago? 😫😭
So sad i dont have welding machine.. so i give up 🙅🏻♂️🤷🏻♂️🤷🏻♂️
.i should sell it.
.
So that ic you replace with new one, not reballing it? Does it broken or what?
.
Btw, your video so complete. This is a real tutorial vdo, step by step, wich is so good, not like others ch, thanks sir, hope you still good well heallthy.. great job 👍👍👍👍👍..
.
And the sony manufacture never release their manual service book and troubleshoot for technician beside we must sent it back to the main dealer to send to the manufacture😆😆😆
.
Problem solved, welldone 👋👋👋👋👋
Hi I'm also have the same problem tr to repaste the termal but it doesn't work.So I have to follow your step,can u list what item u used in your video?
great work sir
did you reball or change the south bridge 39:39
What temperature you use on air gun for that work preheating whole motherboard and that chip ? Tnx!
I watch all the videos you put on TH-cam and I enjoy making the devices
my ps3 slim does not have 1.8v on the cpu and gpu coils, it has 12v on the other coils, would you know what it could be?
The CPU and GPU coils should have 1.00 volt in output terminal. If not check for the switching signals on input terminal that is from the PWM chip on the FETs. the PWM chis located at the backside of the motherbord behind the FETs. Verify the bias resistances for the PWM chip.
@@idreestechthanks❤
Basically what is the problem
mine doesnt blink red 3 times after the green light, it just turns odd
Hi Kevin! If your PS3 isn’t blinking red three times after the green light and just turns off, it could be a sign of a different issue. I recommend checking out some of my other videos on similar errors on my channel - they cover various causes and fixes for PS3 shutdown problems that might help you troubleshoot this. Good luck, and feel free to reach out if you have more questions!
Please Master explain more on that cable how does it work in the arcade?
sure I will
Sir...Mere ps3 slim mein bhi same yahi problem hai? 3 beeps red light blinking kaise theek hoga.😫
🙏🏼PLEASE BATAAYE 🙏🏼
Try accordingly
"Now, I check the thermal circuit." "Now, I turn my oscilloscope to analogue mode." These kinds of sentences that tell us what you're going to do next help us a lot. Thank you for them.
I have been watching you videos for several months now, and I've noticed clear improvements: Now, you use very good angles, you explain what you're going to do. You also mention the values that the components should have. The videos are excellent!
P.S. Why did ground the component on the other side of the board at 11:32? Did you verify that way that it wasn't faulty? If you did, how does grounding help you conclude that it's not faulty?
What a complicated repair! This one took a lot of problem solving to get working again.
I just Ground Tristate to check whether the console was bricked or not and it was not. Because if it would be bricked then the green light says on and no three beeps.
I'm having a very similar problem to the system in this video. Each time it beeps three times and shuts down with the blinking red light. If i repeat this, eventually, the system starts up. Then, randomly during a game, it will shut down with three beeps and the red light blinking again. Any ideas as to what can cause this behavior?
I've searched everywhere for a fix, and came across your videos. I really like how you explain your solutions and how you came up with them
Thanks indeed!
I don't have a welding machine, is applying heat to the same area useful
First, pre-heat the whole motherboard then throw heat to the specific chip from up and below.
hi Sir
i just wanted to ask you did u changed the south-bridge with another one new or did you reballed the original southbrige and installed it again
Yes changed the south-bridge with another one.
Hi I hope you can help me I have a PS3 whit error code 8002F14E PS3 model 3001
No idea, just google it.
hi, top video, i have a ps3 slim cech-2504B, it turns on 2 seconds green led and immediately turns off red led, no other strange noise, i don't know what to check, can you help me thanks
Watch other videos and check.
Uncle number mil skta apka? Same to same yahi problem
How can I get in contact to fix a board? :)
WhatsApp call.
That's so cool >>> (Ice Cream Stick) :D Solve the problem with the ice cream stick hahaha :D why you did not reball the cell? You have a reball station.
Well done sir and I love
Excellent work
Many thanks
Awesome and informative.
Much Love!
Awesome video!! Great patience and deep dive of problems. I have similar red light with beeps... but have a short on the power rail of the CPU and GPU. Any tips please?
Check for the FETs. If both power rails are short then check short curcuit for 12 volts that go to FET.
Thank you teacher be blessed 🙏
Thank you too
Best approach would be connecting TTL and check the error codes for precise identification of the problem
th-cam.com/video/JG1tnoZI6cM/w-d-xo.html
Nice work
Well done sir!
Thanks dear!
I said please work to mines and it was fixed but this video is still good
Tank you bro 🤙
Welcome 👍
What is the cost of PS 3 second hand in Pakistan
18000 Pkr
@@idreestech ok 👍
Wel done master
Much Love!
Good
Thanks
470 v6 ic hai
I have a lot of motherboards.
Mujhe yah chahie
good fix
aleast you didnt wack it withhot air like everyone else thatys a sub from me
أخي الكريم ياريت ترجمه بل عربي 😂
وشكرا لك
قامت Google بالفعل بترجمتها إلى اللغة العربية. فقط انقر فوق علامة التبويب التسمية التوضيحية.
👍
Udru/Hindu main b vdos bnae. Shukran
O
hello good
Thanks for visiting