Really goo , Perfect setup , do u use NVME m.2 on external or sandisk extream pro ssd - 12 k best recorded on whitch drive will ot frame loss and less heat SSD
I always wanted to hear about video transmission. I hear terrible things about teradek but yet it’s industry standard. Do you have any input on your experience with teradek?
Have you had any issues so far with ghost recording/switching on. Mine has switched on once during travel, arrived at the shoot with a half drained v-mount.
@@zackingproductions apologies, to clarify: can you both power the handle and the motor off of d-tap and use the start stop cable? I run the handle into the motor (I use one for focus), the handle-cable goes into one of the two available ports, the other port connects to d-tap. Do you suggest to invididually connect the motor and handle to d-tap and use the remaining port on the motor to connect to the camera (start/stop)? This way you connect the handle and motor wirelessly?
I also have the 12K with similar "accessories". Question, do you follow the rule of powering everything up first and then connecting the SDI cables to prevent the SDI port from being "fried"? Or do you have some information that the 12K doesn't suffer from that issue. I've asked Blackmagic Design but they have not responded to my email.
Where's your 15 mm lower lens support rods mate ? That's too much weight on your camera's lens mount flange !! 😳Over time you may notice your back focus and edge to edge frame image evenness begin to shift ?? 👀 Other than slowly destroying your camera's lens mount, you have a nice rig. 👍
These 2 FAT V Mount Batteries will kill all the nice feeling and handling of the URSA when you push it against your body handheld with just a normal V-Mount Battery behind.
You are a star 🌟 thank you
Love the rig!
Really goo , Perfect setup , do u use NVME m.2 on external or sandisk extream pro ssd - 12 k best recorded on whitch drive will ot frame loss and less heat SSD
Looks great!
9:46 is there any possibility to fry the hdmi by powering the monitor and the camera from the same v-mount battery?
I've never had it happen to me, that being said, it could happen 🤷♂
@@zackingproductions do you have any order for powering the devices?
Great video . Very nice . How much is cast this gear ? I'm a photographer I want starting for documentary. Is it good this camera ?
I always wanted to hear about video transmission. I hear terrible things about teradek but yet it’s industry standard. Do you have any input on your experience with teradek?
I've never used a Teradek. I use CineEye's as a client monitor and it has been great
Have you had any issues so far with ghost recording/switching on. Mine has switched on once during travel, arrived at the shoot with a half drained v-mount.
Nah no ghost recording yet!
Once you use the start / stop recording cable, can you still power the handle by dtap?
Yeah, you plug the D Tap cable into the handle and run the start/stop from the focus motor into the camera.
@@zackingproductions apologies, to clarify: can you both power the handle and the motor off of d-tap and use the start stop cable?
I run the handle into the motor (I use one for focus), the handle-cable goes into one of the two available ports, the other port connects to d-tap.
Do you suggest to invididually connect the motor and handle to d-tap and use the remaining port on the motor to connect to the camera (start/stop)? This way you connect the handle and motor wirelessly?
@@mjscpr Yeah that is exactly what I do. The handle and motor operate wirelessly.
@@zackingproductions Very helpful, thanks!
👍🏻
I also have the 12K with similar "accessories". Question, do you follow the rule of powering everything up first and then connecting the SDI cables to prevent the SDI port from being "fried"? Or do you have some information that the 12K doesn't suffer from that issue. I've asked Blackmagic Design but they have not responded to my email.
No I don't follow that rule
You should stick to that rule. It’s good practice and I don’t believe any modern camera avoids this issue
Well he said he's on his second monitor...that's probably why. Just unhook the sdi, power up. Then plugin everything 😊
Wow~
What gimbal is this rig going on 😮
A steadicam
Where's your 15 mm lower lens support rods mate ? That's too much weight on your camera's lens mount flange !! 😳Over time you may notice your back focus and edge to edge frame image evenness begin to shift ?? 👀 Other than slowly destroying your camera's lens mount, you have a nice rig. 👍
These 2 FAT V Mount Batteries will kill all the nice feeling and handling of the URSA when you push it against your body handheld with just a normal V-Mount Battery behind.
hot piece of garbage got me rolling on the floor haha
Not very clever comment of getting out of business in 2023 if ypu dont have 12k. Very sad for you. Hope you have a nice life.
theres a lil something called sarcasm...
That's ok. Not everyone has a good sense of humour...
@@zackingproductions where's this comment in the 13min video?, I wanna find it so I can be offended too!
@@bmefilms6879 Haha I believe it is at 0:22
Obviously he was being sarcastic.