Thanks a bunch for checking them out . Yeah its too bad it's not practical. Lots of my friends are into RC but none of them into RC Construction Machinery. Thanks again for stopping by and for the great compliments.
Yeah I couldent be more happy with the sound. My neighbors must be like "WTF is that bulldozer doing in his backyard "!! I've spend hours and hours studying the full side D10 and D11 and these High Sprockets tracks really clatter . I've learned that it's a trait of the High sprocket machines. Oval chains don't seem to make as much clatter.
Hi Rafael. Thanks for watching!! It's similar in the US. None of these products exist here. Everything even all my parts come from different countries. China, Spain , Australia, Germany and others. Everything has to be scourced from other countries. Do you have import restrictions in Brazil?
@@rcscalebuilders8268 here in brazil what hinders many products to get here are very high abusive taxes but no problem to send here to brazil i have a channel if you can take a look th-cam.com/channels/iVvAsEGKv6v-VGfWAfA35A.htmlvideos
@@rafaeltokusatsu9600 I flew Rc helix’s once 💥 bought it as a fresh rebuilt to find out once I sunk a few more big bucks for upgrades there was a hidden stripped nut un aware of. My wife laughed out of pain as I went up on take off smacking g ground seconds later knowing I spent hrs of prep & upgrades etc. Hell I even invested in real flight simulator. Bottom line bought used faulty. I agree no crash and burn in Rc construction equipment it’s relaxing Without going anywhere. Great vid once again I saw this sound unit needs a mix? So this must mean your running pump not on demand if not mixing that and your drive channels all options of 4 mixes are up?
Read my last message on a computer. Its getting cut off cause of the link I sent . Anyway it's a novel about the speed control I'm using and the one I think you should get. I'm not mixing my tracks. I'm using one esc. Check out my last message on a computer and it won't get cut off. For some reason the link isn't allowing the "Read More" to drop down my full message.when you go to read it. I go into great detail about the M211 esc and why you want it.
Also one more tip on the SMR . The mixing is only required for the simulated hydraulic noise. Personally I don't like that sound so I don't even use the mix. All the track noise does not require any mixing . I have all 4 mixes dedicated to spooling up the pump when I actuate any of my hydraulic functions. If I did need more mixes I would ditch the stock transmitter and get one with more mixes. Any good sound module that simulates hydraulic function will require it to be mixed with the desired hydro channel.
Nice video, On mine I'm going to switch the left stick for foward , reverse & steering, right stick for blade controls just like the1:1 . I love the sound module you're usen. Got issues with mine .. Cant run it untill taken care of.
Yes I agree!! That's how I have mine. I fly airplanes and Helicopters and throttle and yaw is always on the left . I have my right stk blade up = right; blade down = left ; ripper up = down ; ripper down = up. I kept my blade tilt on the left dial and I kept my ripper tilt on the right dial. I love the operation. It's very smooth and fast.
@@rcscalebuilders8268 i use to fly jets back in the day before edfs , the old glow engines, I liked the OS 91. with a Dynamax fan wich is?a tractor fan. For instance I had a Jet Hanger F4 Phantom , then switched it over to edf , ohhh my goodness , used a 90mm edf fan it screamed.. Im thinking about getting another f4 of Jet Hangers it flys great so does their f86 sabre on a 90mm edf fan .
@@rcscalebuilders8268 I have 3/16" inch of side to side & up & down slop & 1/4" side & up & down slop on the front . The up & down wont hurt nothing but the side to side will damage & ruin the front ideler wheel.That chrome like piece that goes into the ideler wheel , well there's a bolt that holds that into place, I tightened it all the way & didnt help, that's half the problem. Where that chrome like piece goes into the undercarriage rail, the machined hole is to big & there's at least a1.5mm gap there wihich is allowing it to move up , down & to both sides. Dang dog it, I was hoping to get 2 battiers yesterday & run it. I have an idea how to fix it my self. It just aggravates me that we pay well hard saved up money & I get this..... The way I discovered it was I grabbed one of the front tracks to slide it around & I noticed that that part moved before the machine did. I sent a email to them with information whats going on & a fix . Hopefully it will be taken care of.
@@terryperrott9913 that's cool I've only flown Edfs and props. My biggest fan is a 70mm in my Habu. Way upgraded from stock. I have it on Radar doing 127mph . Planes are awesome but you can't really run in the backyard like this machinery. That's what I love about the machines .
![[Live] : ONE FIGHT NIGHT 22 วันนี้!! "สมิลลา vs นาตาเรีย"](http://i.ytimg.com/vi/Hmzh7heFvx8/mqdefault.jpg)
Like🌟🌟🌟👈💯💯👍
🤜🤛
Thank you very much for watching !!
Very good rc mister 👍😁🤗
Terima kasih banyak kerana menonton !! Anda juga mempunyai tapak pembinaan yang sangat bagus dan banyak mesin sejuk.
Some great dirt pushing action. This Dozer can really push dirt well. Love the lights too.
Thank You very much for the compliment!! Yes it is an absolute beast. I can't stop pushing dirt. It's so enjoyable. Thanks again for stopping by.
Love your videos dude. If only the world wasnt so big , we could hang out and cooperate with our rc equipment :( :(
Thanks a bunch for checking them out . Yeah its too bad it's not practical. Lots of my friends are into RC but none of them into RC Construction Machinery. Thanks again for stopping by and for the great compliments.
Good day
Nice video
Thank You Sir!! Hello Israel!! 👋
I do love that sound kit and how you aimed your top cab lights for rear lighting. I’ll be following your lead doing same it really enhances the ripper
Yeah I couldent be more happy with the sound. My neighbors must be like "WTF is that bulldozer doing in his backyard "!! I've spend hours and hours studying the full side D10 and D11 and these High Sprockets tracks really clatter . I've learned that it's a trait of the High sprocket machines. Oval chains don't seem to make as much clatter.
Rafael From Brazil hello my friend perfect video I'm a fan of a bulldozer but here in Brazil they don't exist very hard to have one of these
Hi Rafael. Thanks for watching!! It's similar in the US. None of these products exist here. Everything even all my parts come from different countries. China, Spain , Australia, Germany and others. Everything has to be scourced from other countries. Do you have import restrictions in Brazil?
@@rcscalebuilders8268 here in brazil what hinders many products to get here are very high abusive taxes but no problem to send here to brazil i have a channel if you can take a look th-cam.com/channels/iVvAsEGKv6v-VGfWAfA35A.htmlvideos
@@rafaeltokusatsu9600 I flew Rc helix’s once 💥 bought it as a fresh rebuilt to find out once I sunk a few more big bucks for upgrades there was a hidden stripped nut un aware of. My wife laughed out of pain as I went up on take off smacking g ground seconds later knowing I spent hrs of prep & upgrades etc. Hell I even invested in real flight simulator. Bottom line bought used faulty. I agree no crash and burn in Rc construction equipment it’s relaxing Without going anywhere. Great vid once again I saw this sound unit needs a mix? So this must mean your running pump not on demand if not mixing that and your drive channels all options of 4 mixes are up?
Read my last message on a computer. Its getting cut off cause of the link I sent . Anyway it's a novel about the speed control I'm using and the one I think you should get. I'm not mixing my tracks. I'm using one esc. Check out my last message on a computer and it won't get cut off. For some reason the link isn't allowing the "Read More" to drop down my full message.when you go to read it. I go into great detail about the M211 esc and why you want it.
Also one more tip on the SMR . The mixing is only required for the simulated hydraulic noise. Personally I don't like that sound so I don't even use the mix. All the track noise does not require any mixing . I have all 4 mixes dedicated to spooling up the pump when I actuate any of my hydraulic functions. If I did need more mixes I would ditch the stock transmitter and get one with more mixes. Any good sound module that simulates hydraulic function will require it to be mixed with the desired hydro channel.
Where do I get the sound system from?
Nice video, On mine I'm going to switch the left stick for foward , reverse & steering, right stick for blade controls just like the1:1 . I love the sound module you're usen. Got issues with mine .. Cant run it untill taken care of.
Yes I agree!! That's how I have mine. I fly airplanes and Helicopters and throttle and yaw is always on the left . I have my right stk blade up = right; blade down = left ; ripper up = down ; ripper down = up. I kept my blade tilt on the left dial and I kept my ripper tilt on the right dial. I love the operation. It's very smooth and fast.
What's wrong with yours ?
@@rcscalebuilders8268 i use to fly jets back in the day before edfs , the old glow engines, I liked the OS 91. with a Dynamax fan wich is?a tractor fan.
For instance I had a Jet Hanger F4 Phantom , then switched it over to edf , ohhh my goodness , used a 90mm edf fan it screamed.. Im thinking about getting another f4 of Jet Hangers it flys great so does their f86 sabre on a 90mm edf fan .
@@rcscalebuilders8268 I have 3/16" inch of side to side & up & down slop & 1/4" side & up & down slop on the front . The up & down wont hurt nothing but the side to side will damage & ruin the front ideler wheel.That chrome like piece that goes into the ideler wheel , well there's a bolt that holds that into place, I tightened it all the way & didnt help, that's half the problem. Where that chrome like piece goes into the undercarriage rail, the machined hole is to big & there's at least a1.5mm gap there wihich is allowing it to move up , down & to both sides. Dang dog it, I was hoping to get 2 battiers yesterday & run it. I have an idea how to fix it my self. It just aggravates me that we pay well hard saved up money & I get this..... The way I discovered it was I grabbed one of the front tracks to slide it around & I noticed that that part moved before the machine did. I sent a email to them with information whats going on & a fix . Hopefully it will be taken care of.
@@terryperrott9913 that's cool I've only flown Edfs and props. My biggest fan is a 70mm in my Habu. Way upgraded from stock. I have it on Radar doing 127mph . Planes are awesome but you can't really run in the backyard like this machinery. That's what I love about the machines .
woow same video like i have done one year ago /