I was using my NR2000 last week. I actually started to sputter 1st time ever. I'll have to take it apart and see what the heck is going on. Love them old Satas. They just don't stop 💪🏼
@@thetriggerman954nice, I was clearing a 68 C10 about 3 years ago and my fluid needle adjustment striped out started dripping clear all over the hood lol. I've been using these since 03 I do have a newer prolite and an iwata. When I worked at the dealership painting I used a dv1 and a teknia.
Had a Binks #7 back in the eighties. Bought it cheap from a guy I knew who had let paint dry in it. Soaked it in paint stripper (back when paint stripper actually stripped paint) and worked on it with wood picks and q-tips until I got everything back to "like new" clean again inside and out. Bought an overhaul kit for it and re-built it. Worked like new again. I sprayed DuPont Centari single stage acrylic enamel with the "Performance Pak" (hardner) with it. Worked good. Heavy spray gun though. HEAVY. The guy I bought it from asked to borrow it a couple years later. I didn't want to let him have it, but we had known each other since we were kids, and he shamed me into loaning it to him. Haven't seen him or that spray gun since! You know, he probably did me a favor though.... 😁
Wow 😳 lmao damn man 😂 he got you. Thanks for cleaning my gun 🏃🏽♂️🏃🏽♂️🏃🏽♂️💨 Centari that's that old school. BeachCity don't know why I been thinking you're a 20 year old 😂 that's why you're so witty salute 🫡 OG painter
MY first gun was a brand new JGA-502 Devilbiss with a 30 tip. I bought it way back in 1990 and used it for everything paint primer single stage acrylic enamel, base coat clear coat.
@@thetriggerman954 It's an old syphon feed gun but even back in 1990 it was $400 I still use it today for primer only. But you're right it did everything and it did it very well. But now I need to find a modern gun that will work good on everything. I shoot mostly single stage acrylic enamel Nason 2k But when it comes to metallics I do them in Base coat clear coat. All 4 of my guns are DeVilbiss I have 3 gravity feeds 2 of which are GFG-517 HVLP's with a 10 HVLP B6 cap I have had the 2 HVLP guns for believe it or not for about 10 years and NEVER even once tried them. I use my B-98 conventional GFG DeVilbiss for all my painting and get great results but fog up my spray booth after only about a minute or two. So I am going to try one of the HVLP guns and see how that works. But I am also thinking about an picking up a used Iwata or a used Sata B RP 5000 for $410 shipped. I do not have much of an exhaust system so I am wanting a gun that will keep the overspray down to a minimal level so I can see what I am doing. LOL! And since I don't want to spend a bunch of money buying 2 or 3 more guns with different tips what tip do you recommend for general all around universal use? And would the LVLP work better than the HVLP? I pretty much always wet sand and buff so does the tip really matter? My old JGA 502 uses a 30 tip. So if someone stole all your guns and you needed to start all over what gun and with what tip would you buy? Thanks Triggerman any advice would be greatly appreciated. I am too "old school."
@@thetriggerman954 It's an old syphon feed gun but even back in 1990 it was $400 I still use it today for primer only. But you're right it did everything and it did it very well. But now I need to find a modern gun that will work good on everything. I shoot mostly single stage acrylic enamel Nason 2k But when it comes to metallics I do them in Base coat clear coat. All 4 of my guns are DeVilbiss I have 3 gravity feeds 2 of which are GFG-517 HVLP's with a 10 HVLP B6 cap I have had the 2 HVLP guns for believe it or not for about 10 years and NEVER even once tried them. I use my B-98 conventional GFG DeVilbiss for all my painting and get great results but fog up my spray booth after only about a minute or two. So I am going to try one of the HVLP guns and see how that works. But I am also thinking about an picking up a used Iwata or a used Sata B RP 5000 for $410 shipped. I do not have much of an exhaust system so I am wanting a gun that will keep the overspray down to a minimal level so I can see what I am doing. LOL! And since I don't want to spend a bunch of money buying 2 or 3 more guns with different tips what tip do you recommend for general all around universal use? And would the LVLP work better than the HVLP? I pretty much always wet sand and buff so does the tip really matter? My old JGA 502 uses a 30 tip. So if someone stole all your guns and you needed to start all over what gun and with what tip would you buy? Thanks Triggerman any advice would be greatly appreciated. I am too "old school."
@@thetriggerman954 Have you ever tried or reviewed the Master Elite Performance PRO-88 Series HVLP Spray Gun Ultimate Kit with 3 Fluid Tip Sets 1.3, 1.4 and 1.8mm?
What's happenin bruh..... STRAIGHT DIGGIN THE CHANNEL... RESPECT..FUNNY..MY FIRST WAS THE SATA JET 90 AND I STILL HAVE IT AND I STILL PAINT WITH IT..I BOUGHT MINE NEW IN 2000...OL SKOOL ALWAYS GOOD MONEY.. APPRECIATE YA BRUH .STAND UP SOUTH CAROLINA..OL SKOOL STILL GRINDIN..💯💪
@@anthonyrichardson899 whaaaat up man. Damn you bout the jet 90 brand new. That thing is a beast. Old school in the house. We paved the way for these astronaut painters today 🤣😂🙌🏼 thanks for chiming in 🫡
74 years old here probably been 40 years since I shot with my binks model 7,only did like 8 cars with it put new kit in it but have to use it but change that after watching you lay it down thank triggerman
I started off Painting with the Sata Jet 90 for and Sata Jet NR95 for Base. Miss them both. Got Stolen. Found some on eBay and didn't spray the same as the ones I had.
@@richarddupree8720 I hate that shit. Someone stole my binks. And yeah I bought a used jet 90 from a pawn shop and it didn't spray like the one I have. It's hit or miss with that used stuff
All looks good only friendly thing I can say is just to protect your skin using a cross draft booth so your skin doesn't get irritated by the overspray by getting a paintsuit. The mask you have is awsome btw.You do good work sir I enjoy your videos you kick ass as a Painter!
@@amadeofasolino8151 thanks man 🫡 yea sometimes it's hard for me to were the suit when it's 109° in the booth 🥹 I definitely keep my eyes covered at all times. The eyes absorb chemicals at a much faster rate than the skin. I appreciate you Amadeo 💪🏼🙏🏼
60psi close and fast jet 90 will lay glass with high solids clear. Spayed many many cars with it. Bought a nr when they came out started using that for base but the jet 90 stayed clear gun till the rp came out. Now I’m all iwata for last 10 years
Brout a 90 as my first gun from someone used for build priming started there with it as that worked up along with me to my clearcoat gun still to this day it's with me my first base gun was devilbiss
I'm 60 and I'm not a pro just a hobby guy. But I've been into the 'interest' of painting all my life. My first gun was a siphon gun by Napa made for them by Stewart Warner I think. It had an air motor under the cup with a magnetic paddle in the bottom of the cup to keep your metallics and flakes all stirred up it was cool for the day !
I had the original 90 then in 97 Sata changed the cap to an "S" and then in 99 Sata changed it to an "SL" i still have a mint like new Blue 1.3sl Satjet 90 and it sprays just as good as my 3000rp. I'll never sell it. Its perfect for full paint jobs. Don't forget, alot of the paint we spray was designed like 30 years ago. Example PPG DBC , so these older guns work very well still.
Great video Trigger Man👍 I would say the Sata K3 would keep up. But, it’s a pressure feed gun from about the same era. It’s like painting with a pressure washer 😂 But, it puts it down smooth as silk.
I'm Still Shoot'n All My Clear With My Sata Jet 90, Use A Devilbiss Tekna For Base, I Actually Bought The Tekna To Take The Place Of The Sata But Liked It Better So Went Back To Clearing With It, I Still Have The Box And Extra Tips And Caps That Came With It, Bought It New In 06, Not Sure If It Was NOS Or If They Were Still Making Them Then
Your gun looks like its got a newer SL cap on it. It sprays nice. The original 90 came out in 1989. The Grandfather !! Nothing is faster than the 90 !!! Bwoi lemme tell you ! I love it. Sagola Schmagola.
@@thetriggerman954 look at the air horns. If they have 2 holes on each one then its an SL and will say 1,3 or 1,4SL. If it has only 1 hole on either airhorn then its an S, but alot of those don't say S . I can see in your video it is one of these
@@thetriggerman954 question if I may. At the start of this video, the Civic's paint looks heavy (thick) and kinda cheap. To my untrained eyes, it looks similar to an inexpensive single stage. Can you share your thoughts on why the paint look like that? Was it due to cheap paint or bad prep job or it is a single stage? thank you! th-cam.com/video/leQRxFgSAbc/w-d-xo.html
Same here I still have the 2000 series don't know why but I still have them. And didn't care for them either bought them brand new and I thought I was on top of the world at that time 🥴
Binks 7 was top of the line in the day. I took me a couple of years before I could buy a Binks 7. I had a couple; lol I recall you needed a good fan. The 7 would put allot of spray in the air could not see much. Come a long way with spray booths. Paint is much better guns also. You got this working for you .
my first gun was an AID Model 2 it cost me £2.00 back in 1973 i bought it off the funeral Directors next to the Garage i worked at it was hanging on the wall covered in dust, the guy said they used to spray the coffins with it. I cleaned it up and it sprayed perfect. The first new gun i bought was a Binks barracuda 230 then the first gravity gun was a Sata Jet 90 now i use a 3m which i bought of ebay and a sata 5000 which i also bought of the bay I've used satas and Devilbiss I've never had any other makes though love the vids.
Wow spraying coffins now I never thought about that hustle lol. That's cool man salute the Veteran Painter 🫡 I've never heard of those guns I guess they see before my time. Thank you for chiming in I appreciate it man. 💪🏼
Bro!!! I’m so damn happy I came across a real dude & a great painter in one! 😂 Seriously, believe it or not, I still use the Sata jet 90 sometimes and I can LAY IT DOWN with that muhfugga!!! You earned my New sub here bruh!
Thanks brother welcome to TriggaLand 🤣 we keep sh!t real over here no TV show edited BS. You still got that jet 90 too aye good stuff. Yea I like to bring grandpa out every now and then and spank some ass with it. Thanks for the sub my man 🤜🏼🤛🏼 👊🏼
Sata jet 90 was the first clear gun i learned on. My first gun i purchased rt out of voc school 2001. I ended up buying another. Yes the jet 90 was the Cadillac back in the day. It was considered a hoser. We ran them way higher than 20 psi for clear. More in the air than on the panel, lol itll bust that syrup up for sure. Nr2000 for base back then
Damn there was a box full off those old Sata jets at my old work. All cleaned and retired lol.. I should have tried one but I never had the nerve to get it out. The oldest guns I use daily are my gti pro and my Sata 2000 and 3000. And the 2000 only has some black I use for guide coat on big panels lol
A big shout out for Triggerman. I got my binks #7 for free back in the day. This high end body shop did some crappy work on my ride so I loaded up my trunk with their air tools and a binks #7. That binks worked good on primer and base paint.
Never had a Binks 7 but I still use my Devilbiss JGA-502s. I just can't put them to rest. I love my 3M performance guns with their fat fans but there is just something about my siphon JGA-502 guns I can't put them down. Keep the videos coming.
Still rocking the Siphon feed 🤘🏼🤘🏼 I the cup would always hit the car while I was painting 🤣 but I'm sure you more experience and don't get that. Thank you for watching and chiming in 💪🏼
😂😂😂 brah I thoroughly enjoyed this post. I had and believe still have my binks and stopped using it when the GL2000 clear came out. I really never gave the expensive guns much thought cause when I started in the game I witnessed to many outstanding paint jobs accomplished through preparation and technique. There was no light on the guns and to be real there were as much in the market as there is today. So while in my mind it's to eaches own but know need in my arsenal for 8-1000 spray guns. And by the that lex was looking like glass so and I seen that pattern 👍🏽oldschool for the win. Love my MATCO 🤛🏾
Old school all Day SteelCity you still got a Binks. Boy you a retro like me 🤜🏼🤛🏼 so you don't have a light on your gun? So how can you see your metallics 😉😂😂😂😂
Yo trigger,do you you happen to know the part # on that mask your wearing in this video?? .mannn this takes me back!I had the 90 and the I still have the green sata jet 95.those are the 2 guns I learned with!!
Look at that coverage! That's like a garden hose. I like seeing old school guns in action. I got an old Binks knock-off and an old Snap-On siphon feed that has a built-in pressure gauge that pops out like a tire pressure gauge. There is a guy on youtubes here that still uses the Binks no 7 for most if his paint jobs. Quite the fog machine, but gets the results. Ok, gotta go check out your Grant 7 video👍
I made a grip of money with a Jet90. Moved onto the 95 and never looked back. It was nicer to have no plastic gaskets in the old Sata guns. I've still got some 95's and my OG DeVilbiss JGA Hell yeah I used retarder. No more over here in sunny CA.
@@thetriggerman954 painting has given me a good living bro nice house nice car and 2 vacations a yr pre covid it's a dying trade but a good one keep uploading man you do good stuff 😉😉
Hey Triggerman, I'm an old timer. Been painting for 55 years. Back in the day we were spraying your favorite single stage. This was enamel and we didn't have hardener. To help with the paint viscosity we would heat it up on a hot plate. It would take a couple of days to dry and when you were done you felt like a piece of sticky tape yourself. lol. We had lots of siphon spray guns, DeVilbiss #30 Binks #7. My number 7 even had an air agitator for the metalics. Did you ever spray on the old vinyl tops? We had a special gun for that, today they call it orange peel. Like the content keep up the good work.
Man I've seen the Binks with the agitator for the metallics. Dam that's a flash back for real. And yes I've sprayed a few vinyl tops but I didn't use any special gun The final tops aspirate already had the texture in there so it was basically a scuff apply adhesion promoter then the color. All that stuff was fun man 🥳🥳 good ole days. Thank you for chiming in man and salute to you veteran painters 🫡 much respect and appreciation from The Triggerman 🤜🏼🤛🏼
@@thetriggerman954 Triggerman the vinyl roofs I'm talking about replicated the vinyl. You sprayed them in place of the vinyl. You would zinc chromate the steel top, epoxy or jet seal (a rust inhibitor) and spray. The special gun made it look textured like real vinyl. Saved the time of spraying glue and trimming and fitting a real vinyl top. You had to be there, I guess. Crazy stuff. Lol.
Bro this is a sign I need to use the 1.4 90 I just got more often. I just rewatched your other video about it today... we need to see this gun more 🙏 What settings do you recommend for it?
@@JaminGalv dam. Didn't think about that part. Yea probably hard to find. If I come across something I'll reach back out to you. I'm always looking at that stuff.
First spray gun I used was a graco siphon cup gun with a 1.4 tip and boy I tell you with that gun I could spray single stage DuPont G99 blacker then a trillion midnights!
My oldest gun now is a Devilbiss Flg . Not the flg5, not the 4 not the 3. I never heard of a flg2. Yup flg 1 I guess it's called. I think I bought it in 1993 or 94 ? I don't use it anymore.
Dam for real? Man that was the coolest thing to watch them do the gold. I guess times have changed and prices have gone up on gold so yea it only makes sense. Thanks for the up date big Dawggie 💪🏼🤜🏼🤛🏼 and thanks for watching 🫡
Oldest gun i have is a Satajet 4000B RP in the 1.3, no idea what Sata was doing, that was dogshit compared to the 3000 and 5000 😂, still have my Tekna Prolite from 2014 that was the first gun i bought myself and still use it weekly with that TE20 cap for most of the non custom work that comes through the shop
Yea TE20 that's my fav cap I have the T110 but it's slow. That TE20 knocks them out 💪🏼 man I never even tried a 4000rp that's probably why I never hear about them dog shit like you said 🤠
I'm not sure the exact measurements but I tell you one thing I've painted complete full size school buses inside of the booth with the door closed It barely fit but if that'll give you some type of idea on how big It is.
@@thetriggerman954 Man that's cool! I built my own booth but it cant fit no school bus. It is 23 feet 8 inches by 13 feet 1 inch But is can hold a full size extended cab long bed chevy truck. And that's good enough for me. Your booth looks to be about the same 13 feet wide but maybe 30 feet long? That school bus must have been quite the chore! P.S. I LOVE all your videos! You really are a GREAT painter! But if I were you being in FL I would install a through the wall AC unit if only to keep the sweat off the fresh paint.
@@ricksteelcustoms3196 yea man the owners dad built this booth with his buddies brick by brick. Must have took forever that was in 1956 It doesn't even meet code anymore But it's grandfathered in and it's not a fire hazard so he's safe. And I mean so am I lol 😁
That's right brother get them clowns talking all that nonsense if an gun atomizes good and dose the job what dose it mater the name of it lol!! I've been using the black widow hte and I love how it sprays for me! Have you done an video on that gun?
That's right my man, no I've never done a vid on that gun. I went into Harbor freight for a socket and I saw the gun it was $250 I was like dam I thought Harbor freight only carried $25 guns 😂 But I've heard nothing but good things about it so it must be a pretty good gun. I heard it atomizes great not the fastest gun but atomized is great and lays down in nice finish which is all that matters. 💪🏼
@thetriggerman954 yah it dose great and I like that it's not so fast at putting it down cause I think it gives the novice painters and begainers ease of use tell they learn hand speed techniques and get more comfortable plus I think the hte is also designed that way cause from my research it's supposed to transfer more material to the panels vs overspray than hvlp but spray faster than an lvlp?
@@wrightsrrt871 yea that's true good point. It would be ideal for beginners then once they get the hang of it move up to faster guns. Smart 🤓 💪🏼 a cannon in the wrong hands could be deadly 🤯
@thetriggerman954 you know I relate alot of this to how I tattoo as well cause hand speed is very important when I tattoo and that's why I like painting cars is im an artist as well really want some airbrush guns to do my art on cars like they do with lowriders!
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
It’s not the gun , its the man that knows how to setup and spray
🫡🤜🏼🤛🏼
✊
I too have a Sata jet 90 for many years. Bought it used and it’s still a great gun. A favorite for sure !! Keep those videos coming Triggerman !!
Nice my man. Hold on to those classics 😁 thank you for watching and I'll definitely keep them coming 🤜🏼🤛🏼
Always nice to see a blast from the past lol.....hell I started painting with a develbiss JGA they were amazing guns back in the day
I'm 53, so classic back to the future for me. I watched all 3 with my youngest kid (15) in the past 6 months. Thanks for another great video.
@@runningman00900 classic 🔥🔥
I'm 51 here in southern Oregon, I still use my vintage sata nr2000 and my rp!
I was using my NR2000 last week. I actually started to sputter 1st time ever. I'll have to take it apart and see what the heck is going on. Love them old Satas. They just don't stop 💪🏼
@@thetriggerman954nice, I was clearing a 68 C10 about 3 years ago and my fluid needle adjustment striped out started dripping clear all over the hood lol. I've been using these since 03 I do have a newer prolite and an iwata. When I worked at the dealership painting I used a dv1 and a teknia.
Had a Binks #7 back in the eighties. Bought it cheap from a guy I knew who had let paint dry in it. Soaked it in paint stripper (back when paint stripper actually stripped paint) and worked on it with wood picks and q-tips until I got everything back to "like new" clean again inside and out. Bought an overhaul kit for it and re-built it. Worked like new again. I sprayed DuPont Centari single stage acrylic enamel with the "Performance Pak" (hardner) with it. Worked good. Heavy spray gun though. HEAVY. The guy I bought it from asked to borrow it a couple years later. I didn't want to let him have it, but we had known each other since we were kids, and he shamed me into loaning it to him. Haven't seen him or that spray gun since! You know, he probably did me a favor though.... 😁
Wow 😳 lmao damn man 😂 he got you. Thanks for cleaning my gun 🏃🏽♂️🏃🏽♂️🏃🏽♂️💨 Centari that's that old school. BeachCity don't know why I been thinking you're a 20 year old 😂 that's why you're so witty salute 🫡 OG painter
MY first gun was a brand new JGA-502 Devilbiss with a 30 tip. I bought it way back in 1990 and used it for everything paint primer single stage acrylic enamel, base coat clear coat.
Not familiar with that one 🤔 but it's a devilbiss so I'm sure that sucker did it all with esse 😎💪🏼
@@thetriggerman954 It's an old syphon feed gun but even back in 1990 it was $400 I still use it today for primer only. But you're right it did everything and it did it very well. But now I need to find a modern gun that will work good on everything. I shoot mostly single stage acrylic enamel Nason 2k But when it comes to metallics I do them in Base coat clear coat. All 4 of my guns are DeVilbiss I have 3 gravity feeds 2 of which are GFG-517 HVLP's with a 10 HVLP B6 cap I have had the 2 HVLP guns for believe it or not for about 10 years and NEVER even once tried them. I use my B-98 conventional GFG DeVilbiss for all my painting and get great results but fog up my spray booth after only about a minute or two. So I am going to try one of the HVLP guns and see how that works. But I am also thinking about an picking up a used Iwata or a used Sata B RP 5000 for $410 shipped. I do not have much of an exhaust system so I am wanting a gun that will keep the overspray down to a minimal level so I can see what I am doing. LOL! And since I don't want to spend a bunch of money buying 2 or 3 more guns with different tips what tip do you recommend for general all around universal use? And would the LVLP work better than the HVLP? I pretty much always wet sand and buff so does the tip really matter? My old JGA 502 uses a 30 tip. So if someone stole all your guns and you needed to start all over what gun and with what tip would you buy? Thanks Triggerman any advice would be greatly appreciated. I am too "old school."
@@thetriggerman954 It's an old syphon feed gun but even back in 1990 it was $400 I still use it today for primer only. But you're right it did everything and it did it very well. But now I need to find a modern gun that will work good on everything. I shoot mostly single stage acrylic enamel Nason 2k But when it comes to metallics I do them in Base coat clear coat. All 4 of my guns are DeVilbiss I have 3 gravity feeds 2 of which are GFG-517 HVLP's with a 10 HVLP B6 cap I have had the 2 HVLP guns for believe it or not for about 10 years and NEVER even once tried them. I use my B-98 conventional GFG DeVilbiss for all my painting and get great results but fog up my spray booth after only about a minute or two. So I am going to try one of the HVLP guns and see how that works. But I am also thinking about an picking up a used Iwata or a used Sata B RP 5000 for $410 shipped. I do not have much of an exhaust system so I am wanting a gun that will keep the overspray down to a minimal level so I can see what I am doing. LOL! And since I don't want to spend a bunch of money buying 2 or 3 more guns with different tips what tip do you recommend for general all around universal use? And would the LVLP work better than the HVLP? I pretty much always wet sand and buff so does the tip really matter? My old JGA 502 uses a 30 tip. So if someone stole all your guns and you needed to start all over what gun and with what tip would you buy? Thanks Triggerman any advice would be greatly appreciated. I am too "old school."
@@thetriggerman954 Have you ever tried or reviewed the Master Elite Performance PRO-88 Series HVLP Spray Gun Ultimate Kit with 3 Fluid Tip Sets 1.3, 1.4 and 1.8mm?
My first gun was a model 7 replica when I started painting in 1984.great job Trigger I believe you could spray with a spray bottle & make it look 👍
Lmao not the spray bottle 🤣🤣 1984 salute the Veteran Painter 🫡🤜🏼🤛🏼
What's happenin bruh..... STRAIGHT DIGGIN THE CHANNEL... RESPECT..FUNNY..MY FIRST WAS THE SATA JET 90 AND I STILL HAVE IT AND I STILL PAINT WITH IT..I BOUGHT MINE NEW IN 2000...OL SKOOL ALWAYS GOOD MONEY.. APPRECIATE YA BRUH .STAND UP SOUTH CAROLINA..OL SKOOL STILL GRINDIN..💯💪
@@anthonyrichardson899 whaaaat up man. Damn you bout the jet 90 brand new. That thing is a beast. Old school in the house. We paved the way for these astronaut painters today 🤣😂🙌🏼 thanks for chiming in 🫡
74 years old here probably been 40 years since I shot with my binks model 7,only did like 8 cars with it put new kit in it but have to use it but change that after watching you lay it down thank triggerman
I miss my Binks 7. They stole it out of my car at vocational school. C'mon bro you gotta put that classic to work ♥️💪🏼💪🏼💪🏼
Now thats moving hell of a job
🫡
It's all in the clear you used also different clear's spray differently
I started off Painting with the Sata Jet 90 for and Sata Jet NR95 for Base. Miss them both. Got Stolen. Found some on eBay and didn't spray the same as the ones I had.
@@richarddupree8720 I hate that shit. Someone stole my binks. And yeah I bought a used jet 90 from a pawn shop and it didn't spray like the one I have. It's hit or miss with that used stuff
All looks good only friendly thing I can say is just to protect your skin using a cross draft booth so your skin doesn't get irritated by the overspray by getting a paintsuit. The mask you have is awsome btw.You do good work sir I enjoy your videos you kick ass as a Painter!
@@amadeofasolino8151 thanks man 🫡 yea sometimes it's hard for me to were the suit when it's 109° in the booth 🥹 I definitely keep my eyes covered at all times. The eyes absorb chemicals at a much faster rate than the skin. I appreciate you Amadeo 💪🏼🙏🏼
60psi close and fast jet 90 will lay glass with high solids clear. Spayed many many cars with it. Bought a nr when they came out started using that for base but the jet 90 stayed clear gun till the rp came out. Now I’m all iwata for last 10 years
Jet 90 will always be my all time favorite
Brout a 90 as my first gun from someone used for build priming started there with it as that worked up along with me to my clearcoat gun still to this day it's with me my first base gun was devilbiss
The OG classic 💪🏼 that's one gun I'd never get rid of
Since we're reminiscing on 90's movies, here is my attempt at it. 90's gun to spray a 90's car? I'd call that "Poetic Justice!" 😂😂😂
Lmao smooth my man smooth anything with Janet Jackson gets a 👍🏼 from me. 🤣 yea man those were the days 💪🏼
I'm 60 and I'm not a pro just a hobby guy. But I've been into the 'interest' of painting all my life. My first gun was a siphon gun by Napa made for them by Stewart Warner I think. It had an air motor under the cup with a magnetic paddle in the bottom of the cup to keep your metallics and flakes all stirred up it was cool for the day !
I had a 4000 B RP 1.4 and I didn't like it. That gun needs a 1.2 so I sold it. It was a hoser also...
Napa auto parts? Man I didn't know they had guns too. I've seen a few things with the agitator at the bottom to keep the flakes stuttering. Cool 😎
BINKS 7 was the gun too go to back in the day think I still have mine
@@imrefratilla922 classic 🔥🔥
🤣🤣🤣 YABBA DABBA DOO, everybody loves the Binks #7 all my old school painters leave Triggerman a comment below 💯💪🏾
Yea man I'm back in bedrock on this one champ 🤠🤠 thanks brother 🏆💯
@@thetriggerman954 🤣🤣🤣 you killed it on this one bro 💯💪🏾🔥
Lol, everyone has that damn car that don’t want to leave.
This one laid out like glass sir.🫡
@@embee1973 🤣🤣🤣
I had the original 90 then in 97 Sata changed the cap to an "S" and then in 99 Sata changed it to an "SL" i still have a mint like new Blue 1.3sl Satjet 90 and it sprays just as good as my 3000rp. I'll never sell it. Its perfect for full paint jobs. Don't forget, alot of the paint we spray was designed like 30 years ago. Example PPG DBC , so these older guns work very well still.
They sure do still work well. No seals to go bad just pure awesomeness 🤙🏼😜
Wow that gun covered that base like an avalanche 😂.But smooth
Old school is KING 👑
Great video Trigger Man👍 I would say the Sata K3 would keep up. But, it’s a pressure feed gun from about the same era. It’s like painting with a pressure washer 😂 But, it puts it down smooth as silk.
Not the pressure washer 😂😂😂 man I haven't used a pressure pot gun in for ever. Painting Boar's Head trailers. I don't miss those days.
Did you use the K3 Sata? It’s a fantastic spray gun if you’re doing something big.
@@r.guardia9107 no I didn't it was a devilbiss. It belonged to the dealership I worked at.
I'm Still Shoot'n All My Clear With My Sata Jet 90, Use A Devilbiss Tekna For Base, I Actually Bought The Tekna To Take The Place Of The Sata But Liked It Better So Went Back To Clearing With It, I Still Have The Box And Extra Tips And Caps That Came With It, Bought It New In 06, Not Sure If It Was NOS Or If They Were Still Making Them Then
@@thmper4u wow you bought it new a and still have it, with extra tips. Man that's awesome. That's a real classic there. 💪🏼 A beast of a gun too
Your gun looks like its got a newer SL cap on it. It sprays nice. The original 90 came out in 1989. The Grandfather !! Nothing is faster than the 90 !!! Bwoi lemme tell you ! I love it. Sagola Schmagola.
It's the original cap that came on the gun. I never changed it. But yea man you need to MOVE while spraying this sucker 🤯🏃🏼♂️🏃🏼♂️🏃🏼♂️🏃🏼♂️🏃🏼♂️💨💨
@@thetriggerman954 look at the air horns. If they have 2 holes on each one then its an SL and will say 1,3 or 1,4SL. If it has only 1 hole on either airhorn then its an S, but alot of those don't say S . I can see in your video it is one of these
@@frankartale1026 just looked it says 1.4SL
I still have a Binks 7 that my neighbor gave me about 25 years ago. Used it to practice painting.
You have a gem there. 🙌🏼
that’s a classic. I want one. I’m restoring my 95 Civic so I have interest in your work on these old cars.
Man these are so hard to find in working condition. That would be cool 95 COVID sprayed with a 90's gun 🤘🏼🤘🏼🤘🏼 good luck on the project.
@@thetriggerman954 thank you! I have a short video on the car if you're interested in seeing it. :)
@@HiFiInsider yea let me see what you got. It's on your channel?
@@thetriggerman954 question if I may. At the start of this video, the Civic's paint looks heavy (thick) and kinda cheap. To my untrained eyes, it looks similar to an inexpensive single stage. Can you share your thoughts on why the paint look like that? Was it due to cheap paint or bad prep job or it is a single stage? thank you!
th-cam.com/video/leQRxFgSAbc/w-d-xo.html
You brang that car back to life real talk good job 👏🏼 G💯🦾
Thank you Big homie 👊🏼🙌🏼
My first 3 guns were the NR 95 n the Sata Jet 90 S I'm 52 n still have them the only Sata series I hated was the 2000
Same here I still have the 2000 series don't know why but I still have them. And didn't care for them either bought them brand new and I thought I was on top of the world at that time 🥴
Binks 7 was top of the line in the day. I took me a couple of years before I could buy a Binks 7. I had a couple; lol I recall you needed a good fan. The 7 would put allot of spray in the air could not see much. Come a long way with spray booths. Paint is much better guns also. You got this working for you .
I bought a Binks7 used in 1997 but I was stolen out of my car 😭 I used it like 5 times. "Legendary" 🏆
my first gun was an AID Model 2 it cost me £2.00 back in 1973 i bought it off the funeral Directors next to the Garage i worked at it was hanging on the wall covered in dust, the guy said they used to spray the coffins with it. I cleaned it up and it sprayed perfect. The first new gun i bought was a Binks barracuda 230 then the first gravity gun was a Sata Jet 90 now i use a 3m which i bought of ebay and a sata 5000 which i also bought of the bay I've used satas and Devilbiss I've never had any other makes though love the vids.
Wow spraying coffins now I never thought about that hustle lol. That's cool man salute the Veteran Painter 🫡 I've never heard of those guns I guess they see before my time. Thank you for chiming in I appreciate it man. 💪🏼
I have a binks BBR and a BBR mach1, still awesome guns!
Dang you got the classics 🥳 hopefully you still pull them out every now and then 😎
Gotta love it trigger ✊🏾💪🏾💯 glassy as hell 👌🏾
🙌🏼 thank you Malcolm 💪🏼
Bro!!! I’m so damn happy I came across a real dude & a great painter in one! 😂 Seriously, believe it or not, I still use the Sata jet 90 sometimes and I can LAY IT DOWN with that muhfugga!!! You earned my New sub here bruh!
Thanks brother welcome to TriggaLand 🤣 we keep sh!t real over here no TV show edited BS. You still got that jet 90 too aye good stuff. Yea I like to bring grandpa out every now and then and spank some ass with it. Thanks for the sub my man 🤜🏼🤛🏼 👊🏼
I have a Sata jet 90-2. Was marketed as a sealer gun back in the day,
Yes I remember that one. My friend has 2 of them. It's a colored gun right? It's not the chrome like the jet 90 correct?
Sata jet 90 was the first clear gun i learned on. My first gun i purchased rt out of voc school 2001. I ended up buying another. Yes the jet 90 was the Cadillac back in the day. It was considered a hoser. We ran them way higher than 20 psi for clear. More in the air than on the panel, lol itll bust that syrup up for sure. Nr2000 for base back then
Yes sir sure was the Cadillac 😄 it's still a Cadillac just an outdated one 😭 I left vocational in 98 so we around the same time 🤜🏼🤛🏼💪🏼
Lol… the voice over was hilarious… keep up the good work my man
🫡💪🏼 4sho thanks brother
Still got one ,works fine,it's the painter not the gun,been working in a plant 28 year painting in a shed for years ,luv vids
Thank you brother I appreciate it man. And you're 1000% right. It's the painter but the gun 🤜🏼🤛🏼
I used to use a binks 62 siphon gun. It layed down glass but fogged me out and used too much material
Yeahh that was the Top dog back then 💪🏼🥳
Still have my old #7,and DV MBC siphon guns. And the NR95 and Accuspray Isaac, both early gravity Hvlp’s.
Nice brother I sprayed with the Accuspray 2004 ish was a pretty good good at that time. Man I haven't seen one in forever. Brings back memories 💪🏼
Or your old GTI for the grant 7 clear or if you have a devilbiss plus ,I loved that gun for clear
My GTI won't cut it. I had the plus but I sold it a few years ago to a prepper. I think that plus would have knocked it out. I hate I sold that gun 😭😠
Damn there was a box full off those old Sata jets at my old work. All cleaned and retired lol.. I should have tried one but I never had the nerve to get it out. The oldest guns I use daily are my gti pro and my Sata 2000 and 3000. And the 2000 only has some black I use for guide coat on big panels lol
Man you passed up on a box of gold "treasure chest" 🥠💰lol those grandfather guns lay down some glass by man
They still make the retarters. And I also experienced it on the clear the blemish. Had to use a heat lamp to get it out.
Even in a down draft you get that?
@@thetriggerman954 no. When I work at this job where I painted in environmental elements.
A big shout out for Triggerman. I got my binks #7 for free back in the day. This high end body shop did some crappy work on my ride so I loaded up my trunk with their air tools and a binks #7. That binks worked good on primer and base paint.
Well damn 😅 sounds like some shit I would do. That'll show em 😎💪🏼
Never had a Binks 7 but I still use my Devilbiss JGA-502s. I just can't put them to rest. I love my 3M performance guns with their fat fans but there is just something about my siphon JGA-502 guns I can't put them down. Keep the videos coming.
Still rocking the Siphon feed 🤘🏼🤘🏼 I the cup would always hit the car while I was painting 🤣 but I'm sure you more experience and don't get that. Thank you for watching and chiming in 💪🏼
Couldn't tell from the Video? Was that the Jet 90 that has the 2 holes on each Air Horn? We used to call them (The Bullet) . That's the one I had.
I believe it does have the 2 hoes on each horn. Love that dam gun 💪🏼
😂😂😂 brah I thoroughly enjoyed this post. I had and believe still have my binks and stopped using it when the GL2000 clear came out. I really never gave the expensive guns much thought cause when I started in the game I witnessed to many outstanding paint jobs accomplished through preparation and technique. There was no light on the guns and to be real there were as much in the market as there is today. So while in my mind it's to eaches own but know need in my arsenal for 8-1000 spray guns. And by the that lex was looking like glass so and I seen that pattern 👍🏽oldschool for the win. Love my MATCO 🤛🏾
Old school all Day SteelCity you still got a Binks. Boy you a retro like me 🤜🏼🤛🏼 so you don't have a light on your gun? So how can you see your metallics 😉😂😂😂😂
Biff drove that Ford Super De Luxe 💪💪💪
Yeah man 🤣 the convertible right? Remember when he slid into the truck of cow manure 😁🤛🏼😁😭
Nice clean masking and tape job Trigger ! Nice booth too cool retro video it's vintage like me lol
We both are retro brother 😁 built Ford tough
Yo trigger,do you you happen to know the part # on that mask your wearing in this video?? .mannn this takes me back!I had the 90 and the I still have the green sata jet 95.those are the 2 guns I learned with!!
What a classic combination!!the sata jet 90 and spraying the Old school Lexxx 400 with it!!.nice work as always bro!
Devilbiss gti, sata jet 90, jet 90s, nr95- the 90s called said they want they guns back...but i said hell no im still using em.
Lol I never liked sata's but I do own a dinosaur, in fact 2 of them. Binks m1-g. Old school.
@@FlakeBoss 🙌🏼💪🏼
My oldest gun is a sharp 775 with an agitator cup for flake.
#Classic 💪🏼
Damn son, you laid it down.
Not to bad for stone age equipments aye? Lol thanks brother 💪🏼👊🏼
My first complete was with a MBC in 1971. The #7 was used as a primer gun.
1971 wow salute veteran painter 🫡 guys like your are appreciated here brother. So the #7 wasn't the main spray machine then? Primer gun? 😭😭 Nooooo lol
Trigger can only speak for myself, but the Devilbiss was our gun for enamel.@@thetriggerman954
I still have a Binks 7 with a Eclipse mixing cup works great still but it uses paint compared to modern guns
Classic 🤙🏼😎 I loved mine before it was stolen 😭
1st gun was a Binks Model 7, R&M lacquer paint. Painted a 1972 AMC Javelin.
So you've been around for a while Kevin. Thought you were a newbie 😂
@@thetriggerman954 I've only sprayed 7 cars.
Good work long as u take care of ya gun it will take car of u
Thanks right. Gun still looks and sprays great. 💪🏼
Look at that coverage! That's like a garden hose. I like seeing old school guns in action. I got an old Binks knock-off and an old Snap-On siphon feed that has a built-in pressure gauge that pops out like a tire pressure gauge. There is a guy on youtubes here that still uses the Binks no 7 for most if his paint jobs. Quite the fog machine, but gets the results.
Ok, gotta go check out your Grant 7 video👍
What up Big bear man who's the guy on TH-cam that still uses the Binks? I'll check him out I love them old gun vids.
@@thetriggerman954 You have to really look for the videos where he is actually filming the spraying. But it's DIY auto school.
Since you mentioned it, I want to see you spray that Grant 7 with your SJ 90!
I remember Biff for sure
Buff big ol mean mf'er 🤣🤣💪🏼
I made a grip of money with a Jet90. Moved onto the 95 and never looked back.
It was nicer to have no plastic gaskets in the old Sata guns.
I've still got some 95's and my OG DeVilbiss JGA
Hell yeah I used retarder. No more over here in sunny CA.
Me too man. That's why it's coming in the coffin with me when I go 💪🏼👊🏼💰
That thing is a hose, love that gun
Yea man straight classic there. You can pour oatmeal in there an it'll spray it out 😲😄😲😄
Laying down glass! It seemed like you really dropped travel speed on the hood.
😂
My first guns were the devilbiss gfg516s been a long time since then !
Dam Boy putting down glass on Dat azz nice job
Glass? With and out dated gun and booth? 🥳🤣 Thank you brother 🤜🏼🤛🏼💪🏼
😂😂😂😂why don't you have a flashlight on your gun 😅😅😅 I'm dying
🤣🤣🤣😂😂 🔦🔦🔦
I still have my binks #7
And I also have pressurized gravity mattson atom-miser -4 of them
Nice 💪🏼 let me know if you ever want to sell the Binks 😉 lol 😂 I need to replace my stolen one 😠
90's are so affordable. Only thing i would push more would be Pressure feed.
Pressure feed like from the pot type gun?
Yes sir #7 hell yeah I still got mine
#Classic 💪🏼
Started off back in the 80s with a devilbis jga suction and a binks 7 🤣🤣🤣🤣 still got them and use occasionally, keep it real bro
Damn Dean I didn't know you was an old schooler too 🙌🏼 thought you was a young buck. Salute 🫡 #classics
@@thetriggerman954 🤣🤣🤣 talk like one bruh but old school bud 60yrs and counting 🤪🤪🤪🤪
@@deanbrown7643 😳😳😳😳😳 😮😯😲😲 Triple O.G 🫡🫡🫡🫡
@@thetriggerman954 painting has given me a good living bro nice house nice car and 2 vacations a yr pre covid it's a dying trade but a good one keep uploading man you do good stuff 😉😉
As of like 4/5 years ago they still sold retarder I used it when I used to paint big rigs it works like a charm with that single stage boo boo 😂
Boo boo is right 💩 lol 🤣🤣 yes it did work good from what I remember
I have a original 90 1.3 and 1.4 rebuild I save her for them unreduced single stages that make almost 2 gals when reduced cuz that bih gone need it😅
💦🔫
Hey Triggerman, I'm an old timer. Been painting for 55 years. Back in the day we were spraying your favorite single stage. This was enamel and we didn't have hardener. To help with the paint viscosity we would heat it up on a hot plate. It would take a couple of days to dry and when you were done you felt like a piece of sticky tape yourself. lol. We had lots of siphon spray guns, DeVilbiss #30 Binks #7. My number 7 even had an air agitator for the metalics. Did you ever spray on the old vinyl tops?
We had a special gun for that, today they call it orange peel. Like the content keep up the good work.
Man I've seen the Binks with the agitator for the metallics. Dam that's a flash back for real. And yes I've sprayed a few vinyl tops but I didn't use any special gun The final tops aspirate already had the texture in there so it was basically a scuff apply adhesion promoter then the color. All that stuff was fun man 🥳🥳 good ole days. Thank you for chiming in man and salute to you veteran painters 🫡 much respect and appreciation from The Triggerman 🤜🏼🤛🏼
@@thetriggerman954 Triggerman the vinyl roofs I'm talking about replicated the vinyl. You sprayed them in place of the vinyl. You would zinc chromate the steel top, epoxy or jet seal (a rust inhibitor) and spray. The special gun made it look textured like real vinyl. Saved the time of spraying glue and trimming and fitting a real vinyl top. You had to be there, I guess. Crazy stuff. Lol.
Was nibbling and polish done by hand no machine?
Dope move
Thank you man ✊🏼
Bro this is a sign I need to use the 1.4 90 I just got more often. I just rewatched your other video about it today... we need to see this gun more 🙏
What settings do you recommend for it?
If you are in the heat 1.4 is ideal. In my opinion. Start full fan and 3 turns out then adjust as needed. 💪🏼
@@thetriggerman954 cool I’ll try that next time thanks brother
Got a sata jet 90 but needs rebuilding it was a gift from the ole timer that taught me but needs rebuilding 😓
Classic, get that thing rebuilt man 💪🏼
@@thetriggerman954 trying to find a rebuild kit on eBay but no look I need me a parts gun or something
@@JaminGalv dam. Didn't think about that part. Yea probably hard to find. If I come across something I'll reach back out to you. I'm always looking at that stuff.
@@thetriggerman954 yeah I need the seals but mostly a spring and one of the needles I came across a parts gun put it was a primer gun so no good 😓😓
@@JaminGalv I'll keep my eyes open
I believe the ani f160 works up to 2 bar triggerman, may want to try that with that grant7 clear
Hmmm didn't even think about that one 🤔 good thinking brother. May give that a run
@@thetriggerman954 sorry man I meant 4 bar, I'll have to check mine again to make sure but I do know it's high heck lol
@@myblkz 4 bar? Man you trying to kill me with over spray. I will need a NASA space suit 😂😂
Devilbiss JGA - the other classic.
Yep that's a classic too. Nice my man 💪🏼
You got dat coverage in the first coat! #fosho
Don't tell nobody. They get offended when I do that 😭 🤣
@@thetriggerman954 #wateva!!! 😂🤣 Forget the naysayers!
@@dollabillbrunson8107 4sho 😅 ion really give AF
First spray gun I used was a graco siphon cup gun with a 1.4 tip and boy I tell you with that gun I could spray single stage DuPont G99 blacker then a trillion midnights!
Old school one there for sure 😁
My oldest gun now is a Devilbiss Flg . Not the flg5, not the 4 not the 3. I never heard of a flg2. Yup flg 1 I guess it's called. I think I bought it in 1993 or 94 ? I don't use it anymore.
Hmmm 🤔 never heard of that one. Welcome to the Classic Club my boy 🫡
I need a 90 something Big Body Lexus LS on them thangs dawg. I will make sure you spray it so you are utterly annoyed 😆
Noooo 😭 grab you a 90's Jetta those are fun. My boy had one he use to hide snow bunnies in the trunk 😉🤠🤠
YO TRIGGER!!!! How can I reach ya BRO???? HOLLA!!!!!
DM me On Instagram 💪🏼
No more real gold leaf on them trucks, boss. Nowadays they're using high-quality vinyl that pretends to be goldleaf😮
Dam for real? Man that was the coolest thing to watch them do the gold. I guess times have changed and prices have gone up on gold so yea it only makes sense. Thanks for the up date big Dawggie 💪🏼🤜🏼🤛🏼 and thanks for watching 🫡
Got 2 binks # 7 (first gun) chroma base DuPont
Got them classics miss mine ☹️ I'll trade you a Vevor gun for one? 😉😁
Still got it
Yes sir. Gotta bring her out here n there to make sure 💪🏼
33 year old gun, 64 year old spray booth, 24 year old car and a 29 year old Trigger Man.
More like 45 year old. I'm a dinosaur man 🥴😭😭😭😭
@@thetriggerman954 If you're a dinosaur, then I'm a fossil. I'm older than you!
@@SpinnakerFL 🦕🦖🦴🦴 😂
Oldest gun i have is a Satajet 4000B RP in the 1.3, no idea what Sata was doing, that was dogshit compared to the 3000 and 5000 😂, still have my Tekna Prolite from 2014 that was the first gun i bought myself and still use it weekly with that TE20 cap for most of the non custom work that comes through the shop
Yea TE20 that's my fav cap I have the T110 but it's slow. That TE20 knocks them out 💪🏼 man I never even tried a 4000rp that's probably why I never hear about them dog shit like you said 🤠
I was a JGA 510 man 7 just never sit right in my hand
🤜🏽🤛🏽
Could you tell me where I can find a rebuild kit for my S 90
Man I had 2 other people ask me. I'm going to check my ebay history I purchased one way back I'll see if the store is still in my history.
That's my favorite gun the fan won't open up at all the way
Never sprayed a 90 I have 3000 B RP 1,4 its pretty fast my model 7 binks was stolen also i still have old devilbiss JGA 502
Dam they stole yours too 😠 yea I have my 3000rp as well. Those dam SATA's will out last us if you treat them right.
1989 Binks model #7
Classic 💪🏼👊🏼
Triggerman..... How wide and long is that paint booth? Looks like you can paint a Peterbuilt conventional truck tractor in that thing....
I'm not sure the exact measurements but I tell you one thing I've painted complete full size school buses inside of the booth with the door closed It barely fit but if that'll give you some type of idea on how big It is.
@@thetriggerman954 Man that's cool! I built my own booth but it cant fit no school bus. It is 23 feet 8 inches by 13 feet 1 inch But is can hold a full size extended cab long bed chevy truck. And that's good enough for me. Your booth looks to be about the same 13 feet wide but maybe 30 feet long? That school bus must have been quite the chore! P.S. I LOVE all your videos! You really are a GREAT painter! But if I were you being in FL I would install a through the wall AC unit if only to keep the sweat off the fresh paint.
@@ricksteelcustoms3196 yea man the owners dad built this booth with his buddies brick by brick. Must have took forever that was in 1956 It doesn't even meet code anymore But it's grandfathered in and it's not a fire hazard so he's safe. And I mean so am I lol 😁
what clear is that sir? activator slow or extral slow?
Amtech Clear coat. Slow activator
Here is a link
www.amazon.com/dp/B0758YYDSH/?tag=thetriggerman-20
If its that 2:1 clear you showed us a few months back that's
impressive. If its Grant 7 than I'm sold.
Also, I wonder if the Sagola 4600XL or the Vevor gun can break down the grant 7
@@dardenvern it's the main clear that I use on my channel the AmTech. It's not Grant 7.
@@dardenvern not sure, good question. I have a little left I might try it with that gun. Good idea. I'll try this week.
My oldest gun is a devilbiss plus gun
Great gun, I miss mine ☹️ I sold it to a prepper years back. You can get some glass out of that gun 💪🏼
@@thetriggerman954 oh yeah
Pumping these videos out faster than the LPH 😂
When I'm hot im hot. But when I'm down I'm ghost 😭👻
My friend pete on his channel still paints with that binks #7
What's the channel? If love to watch old school painters with old guns. Real life painters
Can I send you a link on TH-cam in the reply?
th-cam.com/users/liveOZ22CpGUSfI?feature=share
@thetriggerman954 Pete is the first guy I ever watched on TH-cam. He's like you man, and a really honest guy. Tells it the way it is.
@@chriskiefer8365 yes you can
What brand paint do you use?
We use Prospray. Covers great.
The sharps cup gun the Binks the 2001 the jet and the Jet 90 nr2002 GTI rp2000
Throw backs 🙌🏼🙌🏼🙌🏼
Banks #7 was a great gun,not a big sata fan I like me devilbiss
Binks SATA Devilbiss top 3 big dogs. They always have and always will be 💪🏼 in my book
That's right brother get them clowns talking all that nonsense if an gun atomizes good and dose the job what dose it mater the name of it lol!! I've been using the black widow hte and I love how it sprays for me! Have you done an video on that gun?
That's right my man, no I've never done a vid on that gun. I went into Harbor freight for a socket and I saw the gun it was $250 I was like dam I thought Harbor freight only carried $25 guns 😂 But I've heard nothing but good things about it so it must be a pretty good gun. I heard it atomizes great not the fastest gun but atomized is great and lays down in nice finish which is all that matters. 💪🏼
@thetriggerman954 yah it dose great and I like that it's not so fast at putting it down cause I think it gives the novice painters and begainers ease of use tell they learn hand speed techniques and get more comfortable plus I think the hte is also designed that way cause from my research it's supposed to transfer more material to the panels vs overspray than hvlp but spray faster than an lvlp?
@@wrightsrrt871 yea that's true good point. It would be ideal for beginners then once they get the hang of it move up to faster guns. Smart 🤓 💪🏼 a cannon in the wrong hands could be deadly 🤯
@thetriggerman954 you know I relate alot of this to how I tattoo as well cause hand speed is very important when I tattoo and that's why I like painting cars is im an artist as well really want some airbrush guns to do my art on cars like they do with lowriders!
@@wrightsrrt871 man so much money in that shit. Air brush the cars then clear over it. 💰💰🤑🤑🤑