After finishing autoclave process the bin lid and side pores should be kept open for just 5 minutes for escape of residual steam. Otherwise the materials kept inside the bin becomes wet.
You are supposed to vent out any remaining air before putting the weights on. Without venting, static pressure will be less than 15psi due to air pockets not heating up like water, even though the gauge would display 15psi. Feel free to check online
Sir what could be the reason why water is getting inside the sterilization drum? As a result the instruments wrapped in green cloth gets wet leading to corrosion.
The steam (water vapour) when cools down becomes water. That's why the water is inside the drum. Regarding corrosion, every instrument gets some degree of corrosion when they are used, cleaned and sterilized. Also the amount of water inside the drum is not that significant to cause corrosion. I hope you got your answer. Thank you for watching. 🙂
After finishing autoclave process the bin lid and side pores should be kept open for just 5 minutes for escape of residual steam. Otherwise the materials kept inside the bin becomes wet.
Thank you for the information sir! 🙂
You are supposed to vent out any remaining air before putting the weights on. Without venting, static pressure will be less than 15psi due to air pockets not heating up like water, even though the gauge would display 15psi. Feel free to check online
Okay. Thank you 😊
👍
Sir what could be the reason why water is getting inside the sterilization drum? As a result the instruments wrapped in green cloth gets wet leading to corrosion.
The steam (water vapour) when cools down becomes water. That's why the water is inside the drum. Regarding corrosion, every instrument gets some degree of corrosion when they are used, cleaned and sterilized. Also the amount of water inside the drum is not that significant to cause corrosion.
I hope you got your answer. Thank you for watching. 🙂
Thank you for saving our precious time🤭
Most welcome 🙂
Thank you ❤
Most welcome 🙂
Nice one sir👌
Thank you.
thank you so much
You're welcome! 😊
Good information brother
Thank you 🙂
Do share with your friends, juniors and seniors. 🙏
What about gown after autoclaving the expiry date
Didn't get you? Autoclaving the expiry date?
Wow bhai🙏
Thank you 😊
1.5 par jane ke ba sity kitni bajti he 1 ya 3 sir
Siti nahi bajti he is wale autoclave mein.
after auto clave how time' they come to wisel
It varies from machine to machine
Drum size?
8" × 8"
After 10 -15 minutes it will go to red zone brother,, only 10 minutes sufficient for sterile?
It will not go to red zone, unless until there is any blockage in safety valve.
What is the size of autoclave machine?
10L Capacity (9" diameter, 11" height)
Mujhe ye chahihe preshan hu kha se milega Faridabad se hu
Please check on Amazon.
Capacity of Autoclave ??
10 Litre
Rs .
Means?
দাম কত
Can't understand the language.