Gracias por ayudarme a reparar mi nutribullet , estaba frustada , y pensando comprar uno nuevo . Pero gracias a usted pude repararlo , ¡¡¡¡¡ahora funciona otra vez !!!! No tengo ninguna experiencia en electronicos , pero me encanta reparar y aprender Gracias
Can you tell me how this fixed your blender? I feel like I have the same "problem" but don't exactly understand how removing the screw and putting a new one in solves it?
Thank you for this my nutribullet RX the same thing is broken luckily I didn’t throw it away didn’t know they sell the parts on Amazon so I’m going to replace it
I have a shortcut.... instead of fighting with the bottom screw.. just stick a screwdriver or something solid in between the blades at the bottom, this prevents the entire thing from moving, makes it a WHOLE lot easier than to try to grab the bottom screw and unscrew the top at the same time... you're welcome!
Cool but what problem are we trying to solve? I'm looking for assistance on why the blades do not spin. The device turns on and ran it with an empty cup. It started hesitantly going very slow. I then put water inside, and the blade does not turn. Seems water is causing too much resistance. How can I fix this?
Alejandra, I have two vids that show a possible problem for you....the small plastic part that connects the blade to the motor will actually break. Sounds like your plastic part is loose or shredded a big.....try taking it off and looks at it......hope this helps.
Sorry Tom, I'm really not sure about that. Something to try......plug it out and open it up.....smell around the motor...if thats your source....I would not use it....Hopefully its your drive socket and you can replace that.
Hi. My NutriBullet RX just stopped working. Lights come on but when I push on the start button, the blades don’t spin. Any idea what the problem might be please? Would appreciate any advise you might have for me. Thanks
I powered my NutriBullet with 220 volts instead of 110 volts, the commutator and brush seem damaged. Do you where I can get the replacement of the 2 parts?
Heya, I placed an order for your replacement drive, and on your website I noticed you replied to a comment saying that a #6 x 1/2" from a hardware store would be better. My screw is completely stripped so I need to get a new one. Do you now recommend a #6 x 1/2" or the #8 x 3/4"?
Hey Ashley, they both work fine....as long as you get one that has a narrow screw head so that it can sit flush to the replacement part....so I mean these screws flare out as it goes up to the top....that flare out you want to be as narrow as possible
I do not want to put in a right hand thread screw and ruin the original threads because amazon sells a variety of left hand screws. Do you know the exact size of the original screw?
What are the black and gray circles called? The piece you said to chisel to expose the screw is broken but the screw appears fine. What would I look up to find those?
Hey Jasmine I believe your talkin about the drive socket to connect the blade to the motor. Please look at my other video to see the one I made. Hope this helps
hello... by accident I left a fork inside of the nutribullet, after I started and hear the crazy noise I turned off, but now the nutribullet start but doesn't do the job. .any suggestions please?
From most hardware stores the best I found are #6 x 1/2in Self-Tapping Wood screws. Hopefully this helps. The other key is to match the screw head size......and both the right and left threaded screws can work.
K C you can slide the cover off but it does get dirty inside the cover. After taking off the drive socket you can clean under there. The big rubber bumper where the cup sits on can come up just by pulling on it and you can clean under there too.
I cannot for the life of me find a replacement for the screw. Can someone please tell me the exact size of the screw , all the screws that I've bought don't seem to work, they are not fitting in the hole
Hi. My NutriBullet RX just stopped working. Lights come on but when I push on the start button, the blades don’t spin. Any idea what the problem might be please? Would appreciate any advise you might have for me. Thanks
I know the feeling....check out my two videos to troubleshoot the RX. Hopefully its just the drive socket is shredded, it can be replaced. Take off the socket off and see if your drive shaft still spins. Hope this helps
Thanks for this video, I finally got that screw out, and was able to make the repair and now it working once again.
Thank you my nutribullet is working. This was easy. I can make healthy drink again. Blessings & Be safe.
Gracias por ayudarme a reparar mi nutribullet , estaba frustada , y pensando comprar uno nuevo . Pero gracias a usted pude repararlo , ¡¡¡¡¡ahora funciona otra vez !!!! No tengo ninguna experiencia en electronicos , pero me encanta reparar y aprender
Gracias
¡¡¡Eres increíble por probar algo nuevo y gracias por informarme que estás funcionando nuevamente!!!
Thank you so much. Had the parts over a month. You video made much more sense. Thank I just saved over $100.
Thanks for putting together this video. It was very helpful in getting removing the screw. Now I have a functional blender.
Can you tell me how this fixed your blender? I feel like I have the same "problem" but don't exactly understand how removing the screw and putting a new one in solves it?
Thank you for this my nutribullet RX the same thing is broken luckily I didn’t throw it away didn’t know they sell the parts on Amazon so I’m going to replace it
I have a shortcut.... instead of fighting with the bottom screw.. just stick a screwdriver or something solid in between the blades at the bottom, this prevents the entire thing from moving, makes it a WHOLE lot easier than to try to grab the bottom screw and unscrew the top at the same time... you're welcome!
I love u man u saved my life
Thanks for this video, It really helped me get my nutribullet fix,
‘Preciate this man, saved a nigga a few bucks with this
Thank you very much. Excellent service and part. :)
Thanks! I never thought to look under the skin for the screw
Awesome video and very detailed! Thank you😊
Cool but what problem are we trying to solve? I'm looking for assistance on why the blades do not spin. The device turns on and ran it with an empty cup. It started hesitantly going very slow. I then put water inside, and the blade does not turn. Seems water is causing too much resistance. How can I fix this?
Alejandra, I have two vids that show a possible problem for you....the small plastic part that connects the blade to the motor will actually break. Sounds like your plastic part is loose or shredded a big.....try taking it off and looks at it......hope this helps.
Thank you do much, I thought I would have to get rid of my Nutribullet Rx.
Thank you for the info about the screw not going lefty loosey by the way 🙏
Thanks, this was a great video and very helpful!
Very helpfull, try a soket wrench on the fan nut.
Excellent video. Thank you.
Clear and precise. Thanks a lot. We just need to know where to get the replacement part.
Please check out bit.ly/RxDriveSocket for the part. And thanks, I definitely wanted it to be clear....I do not want other as frustrated as I was :)
Mine seems loose but not like yours. The blue light on the side goes on but not the middle geeen one
please help me, , where to find a video that shows how base disassembly of the ninja nutry slim qb3000 series. please help to find
Thanks for the video. Was wondering what may be wrong if the Bullet begins to smell as if something is burning. Its not pungent but noticable
Sorry Tom, I'm really not sure about that. Something to try......plug it out and open it up.....smell around the motor...if thats your source....I would not use it....Hopefully its your drive socket and you can replace that.
@@rcillc7700 Thanks
Thanks man
How much did it last beforr you had to replace it? Thinking about buying nutribullet rx
Just e-mailed you, am having trouble once I got rubber layer off there is just black gunk, no screw like yours shows.
Thats the way i did it. Best way !!!
Hi. My NutriBullet RX just stopped working. Lights come on but when I push on the start button, the blades don’t spin. Any idea what the problem might be please? Would appreciate any advise you might have for me. Thanks
Sounds like your drive socket/gear is shredded
I powered my NutriBullet with 220 volts instead of 110 volts, the commutator and brush seem damaged. Do you where I can get the replacement of the 2 parts?
Sorry, I'm not familiar with those parts......I would say Ebay but you have to know the exact size.
Great information!
Hello. Great video...... Any idea how much the part is to deliver to Spain? Gracias
Please check my site for promotions @ bit.ly/RCI_DesignSpace
dónde puedo comprar tornillos ypiezas para armar un nutribulet??
Cualquier ferretería.
Tornillos y engranajes para madera en Amazon.
Heya, I placed an order for your replacement drive, and on your website I noticed you replied to a comment saying that a #6 x 1/2" from a hardware store would be better. My screw is completely stripped so I need to get a new one. Do you now recommend a #6 x 1/2" or the #8 x 3/4"?
Hey Ashley, they both work fine....as long as you get one that has a narrow screw head so that it can sit flush to the replacement part....so I mean these screws flare out as it goes up to the top....that flare out you want to be as narrow as possible
I do not want to put in a right hand thread screw and ruin the original threads because amazon sells a variety of left hand screws. Do you know the exact size of the original screw?
Hey Rebecca the best I found are regular #8 x 3/4 screws. Hopefully this helps.
What are the black and gray circles called? The piece you said to chisel to expose the screw is broken but the screw appears fine. What would I look up to find those?
Hey Jasmine I believe your talkin about the drive socket to connect the blade to the motor. Please look at my other video to see the one I made. Hope this helps
RCI LLC thank you this does help! I appreciate you response this is the right part.
my screw is not exposed on my rx, it is covered by black rubber material, how do i get the drive socket off?
Grab a knife or some plyers and grip the top, the sticker will come off
hello... by accident I left a fork inside of the nutribullet, after I started and hear the crazy noise I turned off, but now the nutribullet start but doesn't do the job. .any suggestions please?
@ Gloria does the small gear that spins the blade move around easily? If so then that piece is broken. If not then you might have a motor problem.
RCI LLC it doesn’t move easy is normal..the motor start light goes green, then blue but doesn’t even smash a banana what can possible be
@ Gloria sorry to say but it sounds like a motor issue. Did you call the manufacturer?
Where can I find the replacement pieces -- for the thing you removed. I think mine is 'shredded' as you say -- it is currently wobbly.
Hello Asia Ann please use this link: bit.ly/RCI_DesignSpace
Where can I find the screw? Mine rounded out when taking it out
From most hardware stores the best I found are #6 x 1/2in Self-Tapping Wood screws. Hopefully this helps. The other key is to match the screw head size......and both the right and left threaded screws can work.
Dónde venden esa pieza central de la base
gear off amazon...just put in your model
se perdió todo para armarlo 😢
But what about the black rubber part ? where did you get the replacement part for the rubber ?
adventureswithSK which rubber part?
RCI LLC the socket in the middle
I think I misunderstood you.....please visit bit.ly/RxDriveSocket for the drive socket
Why didn’t I try this first I just took apart the whole machine
Hi, is there a way to take the entire thing apart to clean?
K C you can slide the cover off but it does get dirty inside the cover. After taking off the drive socket you can clean under there. The big rubber bumper where the cup sits on can come up just by pulling on it and you can clean under there too.
I cannot for the life of me find a replacement for the screw. Can someone please tell me the exact size of the screw , all the screws that I've bought don't seem to work, they are not fitting in the hole
@Laconan - The best screws I found are regular #8 x 3/4 Self-Tapping Wood Screws. From a small hardware store and not a big box store.
@@rcillc7700 thank you very much
Address....price??
bit.ly/RxDriveSocket
DONT GIVE UP YOUR DAY JOB!!!!!!
Hi. My NutriBullet RX just stopped working. Lights come on but when I push on the start button, the blades don’t spin. Any idea what the problem might be please? Would appreciate any advise you might have for me. Thanks
I know the feeling....check out my two videos to troubleshoot the RX. Hopefully its just the drive socket is shredded, it can be replaced. Take off the socket off and see if your drive shaft still spins. Hope this helps