Hey thanks for the quick easy help however the last light in the back is much easier than everyone is making it. Remove the seatbelt cover to the right of it, reach up and hold the plastic down and then snap the light back in. Really easy. Took less than a min to snap back in.
Great video. I changed my lights out on my truck and sure could have used this video. I bought from Ebay for less than $30, Auxito brand. Thanks! I am subscribing!!!
Great video!! 👍👍 @9:55 when I pull the light module out, the other side (the socket with cable) dropped back inside the tailgate by accident. What do you suggest so I can fish it out. 😬
Just did everything but the reverse lights. Went very smoothly. Even the rear 3rd row light. Only had 1 user error when I grabbed a bulb that apparently had been on too long, so I currently have no fingerprint on my right index. Thanks for the walkthrough!
I've been waiting for almost a full year to find someone who would post the process of upgrading the interior lights of the 2022 Pathfinder. Worked out great - looking forward to see what else you'll do to your Pathfinder.
Big tip on the rear light…..issue is that the mount isn’t secure in the hatch so it pushes up and moves around while trying to clip it in….i had issues for 15 minutes before I tried something…..3 pieces of scotch tape hanging down that is attached to the mount so when your pushing up the light you can pull down on the mounting harness at the same time and it clips right in…once all are clipped in and secure just give a quick pull on the tape and it cuts off up inside the headline
Unfortunately no , I’m limited in videos I can do , cause either the wife doesn’t want certain accessories on her car or the car is equipped with it , I have said if you’re in my area and want. Something done I can do it for free , just so I can film the video
Thanks for this, was very helpful. On a side note, and to my surprise, my 2024 Platinum does not have any of the (4) door lights! Just black plastic blanks covering up where the lights should be. I can't even believe my eyes!
Thanks for the video! This is what I was looking for. I got got my 2022 Pathfinder Platinum two days ago and I can’t stand the incandescent lights lol. I will be upgrading it to the LED lights myself.
I watched your video with great interest so decided to LED my 2024 Platinum. Well guess what! No door lights on the 2024. How about a video showing how to tap into the harness as the light assemblies are readily available. Dealer says harness has changed but I doubt that as the door panel hasn't changed the blanks are in there. Thanks
Thank you for this video. Very detailed and I was able to do mine with no experience. Have you changed the light that shines on the wireless charger area? At night that drives me crazy, it’s the only yellow light in the car now.
Hey. Love your channel. Just upgraded my 2023 Pathfinder Rock Creek to LED lighting. One quick question if you don’t mind since you’re a Nissan technician. Rock Creek doesn’t have a release button for the rear lift gate. Can I add one to that location where the other models have it? Thanks again.
Thank you for the the views and support, to answer your question , anything can be added depends how much you are willing to spend , it can get pricey, you would need to run a harness to the back as well as new latch , lift gate support shocks are also different , plus then configure the computer to read the actual power hatch
Yes that is what I said at the end of the video , I explain it in Laman’s terms so everyone can understand, your explanation may not register with everyone out there
Thinking about doing this with the OEM kit from Nissan. Question, they say you may or may not need an accessory service connector. Did you have one installed? I’m seeing others here who say that post install the lights are dimly lit even when not fully on when the headlights are on, wondering if that rectifies that issue.
Thanks for the video, it definitely helped while changing the lights on my Pathfinder. I could have went cheap with the LEDs, but I took your advice and bought these Philips LEDs.
I’ve gone with cheap ones and even though some cheap ones are good , I’ve been doing these Philips ones for a few years and I rather pay a little more for quality lights
Good day, updates on the led interior lighting swap? Any other suggestion for led lights aside from philips led. Does the dim led lighting after all doors closed do go away after some time when driving or it just completely turns off just when you turn off the engine?
Thanks for your detailed information for each section and it helped me a lot. I was able to change all bulbs except map light. It was easy so I kept it for last. The problem happened when I installed map light and all interior lights have no power. I changed fuse but still none of them came back. Can you please advise? I changed original bulb to see but no luck. Thanks
I ordered Nissan kit and it only came with four 194 bulbs and two 3175 bulbs. For the price you think they would include all bulbs needed, should i return the kit and buy all the same from another supplier ? just curious on your feedback as you work for a nissan dealer
Yes , that is what I said in my video I didn’t get mine from nissan mines are also aftermarket I’ll send u a link u can get all bulbs needed plus 10% off
@@PRviewsvlogs awesome thank you i was just gonna order the remaining four 194’s as i already put GTR lighting for the reverse lights, Those are 1200 lumens a piece from Z1 motorsports so far love them
Thanks just changed mine out your video was very helpful. I just noticed on my 2022 platinum that my rear doors do not have the lights on the bottom is it supposed to be that way?
You are welcome , and yes unfortunately the rear doors don’t have them possibly due to part shortage , also I checked for wiring for them and there is none unfortunately
Hey I switched the lights today however none of them turn on now and even when I use the old bulbs it doesn't turn on as well. I'm thinking the fuse was blown and have no idea how to access it even after looking at the manual. Could you please make a video on it to help me out? Thank you!
Make sure you didn't accidentally hit the main overhead shut off, on the console, when you put the map lights in. I noticed that it's real easy to "jam" the buttons with the map lught lens.
@@PRviewsvlogs I didn't put in Phillips bulbs but some other ones I found on Amazon. The thing with those is, they ever so slightly stay on once the light switch is off. Almost like they are still pulling power. Have any idea why?
I’m not sure what bulbs you bought but the Philips do the same , only bulbs that won’t do that is the lasfit or Nissans , but not worry it , I explained this in the video at the end , after you get out the car and it fully shuts off within a minute or so they do turn off , while driving yes the have a glow , it doesn’t bother me at all , reason I’d cause LED need less power to turn on , unlike the incandescent bulbs , so the LED will stay lit with a small amount of current that is flowing thru the circuit .
@@PRviewsvlogs so it's "normal" then? OK, glad to hear lol. I thought the battery was going to get drained 😕. I'll deal with it then. I really appreciate the info. Thank you
I have a 2023 Pathfinder and swapped out the lights to the exact same ones you used. But these lights are on all the time just very dim even when the car is shut off and locked they go on full bright when a door is opened any suggestions?
I did exactly what the video said, and now my front main map lights will not go on when the door opens. I can put them on individually, but that's it. Off to Nissan I go.
Dear i have question related to the rear door puddle lights they have a place to puddle lights how i can install ? is the wire available inside the door panel or need to pull a wire form accessory connector .
I saved the ceiling light in the back for last. Came out and bulb went in without me having to disconnect it. However, it won’t snap back into place no matter what I do. The plastic inside the headliner it attaches to is just floating up there when I push up the whole bracket inside moves up with it. There’s no resistance. 😢
@@PRviewsvlogs Actually, I found nothing broken. What I did discover is that all you need to do is take a trim tool and pop off the light cover like the other interior lights and you can pop the bulb right in. So much easier. Found this info in the install instructions for the Nissan kit online. I did that and was able to hold the assembly against the headliner while I popped those stupid clips back in. Popped the bulb in and it's all set. You may want to consider updating that part of your video, since it's as easy as the other bulbs that way. If you break a clip or that housing you're SOL. Much safer popping the cover off. 2 pry points either side of the switch :)
@@stevelopes8783thank you. I did the same thing, and mine is just floating up there as well. I don’t know why nobody else has done it this way. Because you can see after you take the whole assembly out, that they are tabs just like the other lights on the cover. So I’m going to try this.
+1 floating bracket. I tried too many times to get the light assembly clipped back in that I eventually broke one of the 2 plastic clips. Wish I had seen this thread first and not just the video. 🤦♂️
Im having a hard time re-installing the cargo light, im planning to go to dealership. Are they ganna fix it for me without getting charge? I just purchased a 2023 pathfinder.
No , they will not , cause you removed it , that shouldn’t even be a question , if you decide to work on your car and can’t fix it then you need to pay to get it fixed .
Trying to change the reverse lights, tapping the trim off is a great idea but my trim tool is bending and that square trim won't come out. Any tips on how to take it out without damaging anything?
I have a question regarding the tinted windows. I thought it was illegal to tint the windshield? I notice it gets really hot with the sun facing the windshield
Yes they always will , cause there is always a small amount of current flowing thru the circuit and LEDs don’t take much current to light up so yes , but I don’t even notice them , the light is so dim it’s not even noticble
One difference at least with my 2023, there are no lights at the bottom of the doors. I see the spot were there are suppose to be. Did they remove them for the 2023? It’s a Platinum. Thanks.
@@PRviewsvlogs I was talking about the 2 above the sunglasses holder, 1 driver side visor, 1 passenger side visor, 1 driver side door, 1 passenger side door, 1 rear driver side dome light on top, 1 rear driver side on the door bottom, 1 rear passenger side dome light on top and 1 rear passenger side door bottom. Sorry if that’s confusing
Nope not at all , neither my wife nor my son or me have ever really noticed what people complain about , you have to be like 4feet tall to notice it I guess
Great instructional video - all of his are - thank you. But, OMG! So, so bright! No thank you. If we are on the road at night and go from dark to full blast LED dome lights when the car shuts off or a door is opened, it's quite a painful and sudden eye adjustment - this is why Nissan default to milder incandescent bulbs. We camp alot and arrive home after dark alot and we have little ones and older family members that actually prefer the softer, less bright and more natural light of incandescent bulbs. But for those that need/want all those artificial lumens blasting, yes, LEDs are the way to go. For me, I typically only drop LEDs in the cargo area light, the puddle lights and the back up lights.
Also just brought to my attention the 3175 for the cargo area come in differ sizes , 31mm and 28mm unfortunately Philips does not make a 28mm for this , but will still work just as fine .
@@PRviewsvlogs I spent two hours trying and I thought I finally got it until I bumped it today and it fell out. Did your white bracket in the light move on you while trying to install? I’m thinking of taking it to the dealer and having them pop it back in
Yes , like I said that one was a pain , I unplugged the whole thing just left the connector put the entire light together and plugged it in and installed it
@@PRviewsvlogs You use the bulbs you want but I have never had any problems, my last vehicle was 5 years old with absolutely no problems with LEDS. I have the same brand now but the correct size in the cargo area that you do not.
cargo is 3175 just that the bulbs are thicker due to the housing , it’s the right size , and yes I will use the bulbs I want , that’s what I said in the video .
You made changing the lights a breeze, thanks!! Have you ever thought if yellow fog lights? I've been searching for the bulb size/info but there's practically nothing out there. The white led looks nice, but I miss have yellow so I wanted to swap LEDs if possible.
I love that you post the pics too. So ppl have no anxiety about getting the right ones. Thank you. Looks NICE
Hey thanks for the quick easy help however the last light in the back is much easier than everyone is making it. Remove the seatbelt cover to the right of it, reach up and hold the plastic down and then snap the light back in. Really easy. Took less than a min to snap back in.
This helped me out so much. It was a breeze with your recommendation. Thank you.
Your a life saver man thanks
I appreciate you sharing all these installs. I purchased the led interior lights and installed them myself. Your videos are very helpful!
Great to see videos from a local from the Windy City. Great video. And great easy instructions.
Great video. I changed my lights out on my truck and sure could have used this video. I bought from Ebay for less than $30, Auxito brand. Thanks! I am subscribing!!!
Thank you. That rear compartment one was a real pain to get clipped back in. This video was very helpful
Yes I hate doing that light
Thank you for the video ! Just got my wife a 2023 pathfinder and those lights look so cheap ! Especially the reverse lights !
Great video!! 👍👍
@9:55 when I pull the light module out, the other side (the socket with cable) dropped back inside the tailgate by accident. What do you suggest so I can fish it out. 😬
Changed all bulbs to LED yesterday. I followed your video. Thanks!
Good to hear , and you are welcome .
Just did everything but the reverse lights. Went very smoothly. Even the rear 3rd row light. Only had 1 user error when I grabbed a bulb that apparently had been on too long, so I currently have no fingerprint on my right index. Thanks for the walkthrough!
Lol , I’ve done that before .
Thanks for the video, it’s almost 1am and I wanna go outside and install mine haha
You’re welcome
I've been waiting for almost a full year to find someone who would post the process of upgrading the interior lights of the 2022 Pathfinder. Worked out great - looking forward to see what else you'll do to your Pathfinder.
I have a bunch of videos on my channel for the pathfinder
Big tip on the rear light…..issue is that the mount isn’t secure in the hatch so it pushes up and moves around while trying to clip it in….i had issues for 15 minutes before I tried something…..3 pieces of scotch tape hanging down that is attached to the mount so when your pushing up the light you can pull down on the mounting harness at the same time and it clips right in…once all are clipped in and secure just give a quick pull on the tape and it cuts off up inside the headline
I had to remove the headliner and hold the housing down. Good point.
@csteger1201 what no , well I guess if that worked for u
Thank you for this. Very beneficial for me replacing mine in our newly acquired '22 Pathfinder.
Great video, i just bought 2022 pathfinder. This video helps alot.
Have more on my channel , plus a few more coming
Do you have a video on replacing the Headlight bulb's low beam?
The headlights are LED you can’t replace them without replacing the entire assembly
Do you have a video how to install foglight finisher for 2022 pathfinder?
Unfortunately no , I’m limited in videos I can do , cause either the wife doesn’t want certain accessories on her car or the car is equipped with it , I have said if you’re in my area and want. Something done I can do it for free , just so I can film the video
You’re the man! Thank you so much for this extremely informative video
You are welcome 🙏
Great video thank you. Do you plan on adding floor board? I would like to add it to mine.
Running boards ?? No not on my car but I have a video that I did on a viewers pathfinder
Incredibly helpful. Thank you!
Thanks for this, was very helpful. On a side note, and to my surprise, my 2024 Platinum does not have any of the (4) door lights! Just black plastic blanks covering up where the lights should be. I can't even believe my eyes!
I have a rock creek and I don’t have them either
Just did this upgrade on our new Pathfinder. Thank you Sir, for taking time to make this incredibly helpful and excellent video.
Amazing! You make it look so easy!!
Thanks for the video! This is what I was looking for. I got got my 2022 Pathfinder Platinum two days ago and I can’t stand the incandescent lights lol. I will be upgrading it to the LED lights myself.
Congratulations on your purchase
In the upgrade kit from Nissan there is a short wiring connector required. What's that all about? Many Thanks
Thanks for the video. It helped me out a lot!
I watched your video with great interest so decided to LED my 2024 Platinum. Well guess what! No door lights on the 2024. How about a video showing how to tap into the harness as the light assemblies are readily available. Dealer says harness has changed but I doubt that as the door panel hasn't changed the blanks are in there. Thanks
Well I would 2024 a car to do so and mine currently has them but u did give me a idea my rear doors don’t have any … I might look into it
Thank you very much for the video, it helped me tremendously. From the bulb recommendation to the actual install it was exactly as you showed me.
Thank you for this video. Very detailed and I was able to do mine with no experience.
Have you changed the light that shines on the wireless charger area? At night that drives me crazy, it’s the only yellow light in the car now.
😂 I know I looked into it and there is. I way to change it . Unfortunately, not without hacking up the wiring harness
@@PRviewsvlogs oh man, that sucks.
Thanks for the reply though, I appreciate it!
Hey. Love your channel. Just upgraded my 2023 Pathfinder Rock Creek to LED lighting. One quick question if you don’t mind since you’re a Nissan technician. Rock Creek doesn’t have a release button for the rear lift gate. Can I add one to that location where the other models have it? Thanks again.
Thank you for the the views and support, to answer your question , anything can be added depends how much you are willing to spend , it can get pricey, you would need to run a harness to the back as well as new latch , lift gate support shocks are also different , plus then configure the computer to read the actual power hatch
You can try this website they have a aftermarket option
www.autoease.com/product/liftgate/
Hey man I'm having issuess with that white assembly piece where the lights clip into . They keep moving around a bit did you have this problem ?
It's a bias voltage, until the circuit is completed. The incandescent draw much more power so they will not illuminate. Great video nice upgrade..👍
Yes that is what I said at the end of the video , I explain it in Laman’s terms so everyone can understand, your explanation may not register with everyone out there
Thinking about doing this with the OEM kit from Nissan. Question, they say you may or may not need an accessory service connector. Did you have one installed? I’m seeing others here who say that post install the lights are dimly lit even when not fully on when the headlights are on, wondering if that rectifies that issue.
No didn’t use the connector and if you watch til the end of the video they do eventually go off
Thanks for the video, it definitely helped while changing the lights on my Pathfinder. I could have went cheap with the LEDs, but I took your advice and bought these Philips LEDs.
I’ve gone with cheap ones and even though some cheap ones are good , I’ve been doing these Philips ones for a few years and I rather pay a little more for quality lights
Do the bulbs get real hot ?
Yes
@@jasonwhite2855 they don't get hot. LEDS, generally don't generate that much heat compared to regular bulbs.
So glad LED lighting is cheap nowadays. The whole process cost me less than $30 thanks to amazon.
Hi! Thanks for this video. Any chance you tried changing the side marker lights at the front? Having a hard time removing it.
If I’m correct those are LEDs soldered into a board it’s part of the assembly can’t remove them
Right on for doing this video! Just got my pathfinder and ready to change these lights out.
You are welcome , I have more videos and also more to Come
I got the 2022 platinum I enjoy the halogen interior lights not too bright great video
Good day, updates on the led interior lighting swap? Any other suggestion for led lights aside from philips led. Does the dim led lighting after all doors closed do go away after some time when driving or it just completely turns off just when you turn off the engine?
If you watch till the end of the video I show that they do turn off all the way , also it’s been 2 years and still working perfect
@@PRviewsvlogs nice!! Thanks. Been a while thinking of upgrading my led interior. But this time it will be.
Did you have problems like trunk dont come up all the way after installing led?
Thanks for your detailed information for each section and it helped me a lot.
I was able to change all bulbs except map light. It was easy so I kept it for last. The problem happened when I installed map light and all interior lights have no power.
I changed fuse but still none of them came back. Can you please advise?
I changed original bulb to see but no luck.
Thanks
Not sure , never heard of this issue before
I think you should install the factory lighted sill plates, then i can see how its done and then do mine.
More videos to come
I just ordered the nissan led upgrade. Ill try to get it in this weekend. Ill let you know how it is.
Very simple
I ordered Nissan kit and it only came with four 194 bulbs and two 3175 bulbs. For the price you think they would include all bulbs needed, should i return the kit and buy all the same from another supplier ? just curious on your feedback as you work for a nissan dealer
Yes , that is what I said in my video I didn’t get mine from nissan mines are also aftermarket
I’ll send u a link u can get all bulbs needed plus 10% off
www.auxito.com/DqhmMYIEl7mUBo
@@PRviewsvlogs awesome thank you i was just gonna order the remaining four 194’s as i already put GTR lighting for the reverse lights, Those are 1200 lumens a piece from Z1 motorsports so far love them
Does the 2024 Platinum have halogen lights as well?
Yes they all do
I need help clipping back in the dome light in the back. It just won't clip in.
thank you....doing it right now !!
I am trying to buy those 194 philips bulbs 💡... but Amazon says no fit on the 2022 nissan pathfinder....
Yes they will Amazon is not always right ,
You can also try these and get 10% off
www.auxito.com/DqhmMYIEl7mUBo
Thanks just changed mine out your video was very helpful. I just noticed on my 2022 platinum that my rear doors do not have the lights on the bottom is it supposed to be that way?
You are welcome , and yes unfortunately the rear doors don’t have them possibly due to part shortage , also I checked for wiring for them and there is none unfortunately
@@PRviewsvlogs okay that makes sense thanks for the reply!
Just did all mine in a 2023 Platinum. I have no courtesy lights in my doors though. Just solid plastic covers. What's up with that?
Probably eliminate for 2023
Hey I switched the lights today however none of them turn on now and even when I use the old bulbs it doesn't turn on as well. I'm thinking the fuse was blown and have no idea how to access it even after looking at the manual. Could you please make a video on it to help me out? Thank you!
Did you try flipping the bulbs ?
@@PRviewsvlogs Yup, tried using the original nissan bulbs as well
@@NYzJatt13 not sure how you could blow a fuse replacing those lights , there is a fuse box under the hood try checking there
Make sure you didn't accidentally hit the main overhead shut off, on the console, when you put the map lights in. I noticed that it's real easy to "jam" the buttons with the map lught lens.
What about the visor lights? Did you do those? Is so what bulb?
Great job by the way! 👍🏽
Thank you . I have link to all bulbs in description, and also the size of bulb.
@@PRviewsvlogs my man!!!!
@@PRviewsvlogs I didn't put in Phillips bulbs but some other ones I found on Amazon. The thing with those is, they ever so slightly stay on once the light switch is off. Almost like they are still pulling power. Have any idea why?
I’m not sure what bulbs you bought but the Philips do the same , only bulbs that won’t do that is the lasfit or Nissans , but not worry it , I explained this in the video at the end , after you get out the car and it fully shuts off within a minute or so they do turn off , while driving yes the have a glow , it doesn’t bother me at all , reason I’d cause LED need less power to turn on , unlike the incandescent bulbs , so the LED will stay lit with a small amount of current that is flowing thru the circuit .
@@PRviewsvlogs so it's "normal" then? OK, glad to hear lol. I thought the battery was going to get drained 😕. I'll deal with it then. I really appreciate the info. Thank you
I have a 2023 Pathfinder and swapped out the lights to the exact same ones you used. But these lights are on all the time just very dim even when the car is shut off and locked they go on full bright when a door is opened any suggestions?
They do turn off fully after a few minutes
I did exactly what the video said, and now my front main map lights will not go on when the door opens. I can put them on individually, but that's it. Off to Nissan I go.
No one of the buttons is pushed in on the map light console
Dear i have question related to the rear door puddle lights they have a place to puddle lights how i can install ? is the wire available inside the door panel or need to pull a wire form accessory connector .
No there is not wiring in the door panel .
I saved the ceiling light in the back for last. Came out and bulb went in without me having to disconnect it. However, it won’t snap back into place no matter what I do. The plastic inside the headliner it attaches to is just floating up there when I push up the whole bracket inside moves up with it. There’s no resistance. 😢
Something broke off then
@@PRviewsvlogs Actually, I found nothing broken. What I did discover is that all you need to do is take a trim tool and pop off the light cover like the other interior lights and you can pop the bulb right in. So much easier. Found this info in the install instructions for the Nissan kit online. I did that and was able to hold the assembly against the headliner while I popped those stupid clips back in. Popped the bulb in and it's all set. You may want to consider updating that part of your video, since it's as easy as the other bulbs that way. If you break a clip or that housing you're SOL. Much safer popping the cover off. 2 pry points either side of the switch :)
@@stevelopes8783thank you. I did the same thing, and mine is just floating up there as well. I don’t know why nobody else has done it this way. Because you can see after you take the whole assembly out, that they are tabs just like the other lights on the cover. So I’m going to try this.
+1 floating bracket. I tried too many times to get the light assembly clipped back in that I eventually broke one of the 2 plastic clips. Wish I had seen this thread first and not just the video. 🤦♂️
Thank you, removing that light cover was a life saver.
Im having a hard time re-installing the cargo light, im planning to go to dealership. Are they ganna fix it for me without getting charge? I just purchased a 2023 pathfinder.
No , they will not , cause you removed it , that shouldn’t even be a question , if you decide to work on your car and can’t fix it then you need to pay to get it fixed .
Trying to change the reverse lights, tapping the trim off is a great idea but my trim tool is bending and that square trim won't come out. Any tips on how to take it out without damaging anything?
I should just pop out , there is not much to it .
I have a question regarding the tinted windows. I thought it was illegal to tint the windshield? I notice it gets really hot with the sun facing the windshield
It is again on this car it’s 50% which is very little tint but still makes a slight difference
How is this brighter than nissans own leds? Btw.. great video. Detailed install
Nissan LED are about the same , but cost 3 times the price
Hows the bulbs now sir? Does it still light up a little after u close the doors?
Yes they always will , cause there is always a small amount of current flowing thru the circuit and LEDs don’t take much current to light up so yes , but I don’t even notice them , the light is so dim it’s not even noticble
@@PRviewsvlogs how bout when u turn off the engine? It will not cause the battery to discharge?
No , if you watch the entire video I explain all this .
@@PRviewsvlogs i more thing sir, how long did it light up after u turn off the power?
About 2-3 minutes , as stated before I showed this in the video
Are you considering upgrading the led headlight? They are not as bright as my CRV 2017.
No , not at all , I think they are bright enough .
I want to change the ones in my 2023 pathfinder
It’s the same thing
One difference at least with my 2023, there are no lights at the bottom of the doors. I see the spot were there are suppose to be. Did they remove them for the 2023? It’s a Platinum. Thanks.
Not sure if it’s been mentioned but you actually need 10 of the 194 lights not 8 as the video mentioned. Nonetheless great video super easy to do
If your referring to the license plate bulbs , the platinum models come with LEDs already
@@PRviewsvlogs I was talking about the 2 above the sunglasses holder, 1 driver side visor, 1 passenger side visor, 1 driver side door, 1 passenger side door, 1 rear driver side dome light on top, 1 rear driver side on the door bottom, 1 rear passenger side dome light on top and 1 rear passenger side door bottom. Sorry if that’s confusing
@@jessiebailon6705 yea didn’t care for doing visor lights , they. Don’t get used enough .
i can’t unscrew the reverse light assembly. I’m turning counter clockwise but it’s not budging… any tips?
Not sure why your having a hard time they should just turn easily.
Do front seat passengers complain about being too low?
Nope not at all , neither my wife nor my son or me have ever really noticed what people complain about , you have to be like 4feet tall to notice it I guess
My wife and daughter do;they’re 5’2” and 5’5”. But your videos are awesome and easy to follow. Thanks.
My wife is 5’5 and hasn’t said anything but either way thank you for watching .
Great instructional video - all of his are - thank you. But, OMG! So, so bright! No thank you. If we are on the road at night and go from dark to full blast LED dome lights when the car shuts off or a door is opened, it's quite a painful and sudden eye adjustment - this is why Nissan default to milder incandescent bulbs.
We camp alot and arrive home after dark alot and we have little ones and older family members that actually prefer the softer, less bright and more natural light of incandescent bulbs.
But for those that need/want all those artificial lumens blasting, yes, LEDs are the way to go. For me, I typically only drop LEDs in the cargo area light, the puddle lights and the back up lights.
Not as bright as you think , camera ISO makes it look brighter then it is .
Thank you for this video. Do you have a link for the complete set to avoid ordering the wrong bulbs? Thank you.
No but I’ll give you the link to each one
194 bulbs. amzn.to/3EPrHDb (x4)
921 bulbs (x1) amzn.to/3zmZyly
3175 (x2) amzn.to/3zjeHoe
Also just brought to my attention the 3175 for the cargo area come in differ sizes , 31mm and 28mm unfortunately Philips does not make a 28mm for this , but will still work just as fine .
@@PRviewsvlogs Thank you for the links, have a great New Year.
You are welcome , you as well
Thank you
Your welcome
This rear dome light is going to be the death of me. I cannot get it back on. Any tips?
Yes that was the pain in the butt , be patient is
All I can say .
@@PRviewsvlogs I spent two hours trying and I thought I finally got it until I bumped it today and it fell out. Did your white bracket in the light move on you while trying to install? I’m thinking of taking it to the dealer and having them pop it back in
Yes , like I said that one was a pain , I unplugged the whole thing just left the connector put the entire light together and plugged it in and installed it
@@PRviewsvlogs can the little accent light above the wireless charger be changed out?
It can but it’s a pain you would have to wire a new led to it , that mean cutting wires and connectors to solder new wire and bulb
Can the signal light be changed?
Yes , but you’ll get the hyper flash
You can do it for under $25 with the correct size bulbs in the cargo area.
Not with cheap bulbs , i don’t use anything but Philips , the other bulbs diodes burn out abs flicker you’ll be replacing them to often
@@PRviewsvlogs You use the bulbs you want but I have never had any problems, my last vehicle was 5 years old with absolutely no problems with LEDS. I have the same brand now but the correct size in the cargo area that you do not.
cargo is 3175 just that the bulbs are thicker due to the housing , it’s the right size , and yes I will use the bulbs I want , that’s what I said in the video .
3175 is correct but the length is 28mm not the ones you used. They do come in different lengths.
@@thelandrys703 and you know what you are correct . I didn’t even think of that .
You lost me at pry tool. I will surely break something. I will pay extra for someone else to do this. 🤣
Very easy to do
You made changing the lights a breeze, thanks!!
Have you ever thought if yellow fog lights? I've been searching for the bulb size/info but there's practically nothing out there. The white led looks nice, but I miss have yellow so I wanted to swap LEDs if possible.
The fog lights are LEDS diodes , not bulbs , but you can add yellow film to the light lens
❤❤
Lift it!
Nope
why so much
Cause they are quality lights .