Rhino line all the back seats, trunk , and cut areas that will rust, like ASAP. Before the kit is bonded on. There may be water puddles and draining issues and it’s best to solve it before it rusts from the inside out.
To cut those lines I would say your best bet would be to disconnect it from the tank and then cut it with a saw or pipe cutter. If there werent 2 lines so close together I would say to use a small pipe cutter but I dont think you can fit that in there and do full spins so if it is even possible, it will take you a while... Maybe you can cut them one at a time starting with the small one to get it out of the way and bend it far enough apart to get the larger one? Cut the small one first with this: cloudfront.zoro.com/product/full/Z1ywpwfo5oz.JPG and then see if you can pull it away from the larger pipe to get full turns in with the pipe cutter.
Now that was informative! Well done! I was wondering about that smaller hose line. Use flex bond on the body to fender to reduce fiberglas spiderwebbing.
It's coming out well! This is so interesting and will be helpful in the future. Btw where did you buy the infinity and about what price? We dont got any of infinities of this model in my country. Guess it'll be bringing a car and a kit from the USA 😂
That small line next to the fuel filler is the fuel vapor return. It’s part of the evaporative emissions system. If you didn’t extend it, you would have gotten a check engine light with a massive evap leak, and it would have smelled like gas inside and outside the car.
Hey I’m getting a kit to build the vador for my first car and I was wondering if I could have a professional put it on for me is that possible or do I have to do it myself
several shops in orlando, Tampa, St pete but be prepared for 80-100k bill. . . + it way more fun to do it your self. Even if just learning - even with your mistakes you will be no where near that much $. good luck
Your wheels are not supercar level they look lost, you need the correct split rims to make your kit car look like a real Vaydor! If can’t afford the wheels then really you should have just turned to a road car and tuned it up, this want help your image or credibility! You my have been better off letting Vaydor build the car for you with a top class finish making the car saleable We all look forward to the main paint work and finishing touches don’t hold off! Hopefully my comments will help you with a very important point surrounding the quality
crazy amount of work, it'll be so satisfying for you when you're finished keep it up
I am so jealous since you are building this car!!!! Hope everything works well!!!!
So glad you hired a professional for the welding. In the end he did a pretty good job and it looks really safe.
Always looking forward to your vids! Coming along great.👍
The cars coming along great! Can’t wait for more vids!
Rhino line all the back seats, trunk , and cut areas that will rust, like ASAP. Before the kit is bonded on. There may be water puddles and draining issues and it’s best to solve it before it rusts from the inside out.
Keep it up with your amazing vids
To cut those lines I would say your best bet would be to disconnect it from the tank and then cut it with a saw or pipe cutter. If there werent 2 lines so close together I would say to use a small pipe cutter but I dont think you can fit that in there and do full spins so if it is even possible, it will take you a while... Maybe you can cut them one at a time starting with the small one to get it out of the way and bend it far enough apart to get the larger one? Cut the small one first with this: cloudfront.zoro.com/product/full/Z1ywpwfo5oz.JPG and then see if you can pull it away from the larger pipe to get full turns in with the pipe cutter.
Now that was informative! Well done! I was wondering about that smaller hose line. Use flex bond on the body to fender to reduce fiberglas spiderwebbing.
Hey car looks great, did the kit come with any directions? Or are you just doing it all by trial and error? Great job!
Nice to watch your sub count go up every day
It's coming out well! This is so interesting and will be helpful in the future. Btw where did you buy the infinity and about what price? We dont got any of infinities of this model in my country. Guess it'll be bringing a car and a kit from the USA 😂
Coming along well....question: If you ever need to remove the valve cover will the windshield support have to be cut??
Hey also what color do you think you'll paint the car?
yea- cut both lines the same right around the hold hanger- your on the right track - good luck
That small line next to the fuel filler is the fuel vapor return. It’s part of the evaporative emissions system. If you didn’t extend it, you would have gotten a check engine light with a massive evap leak, and it would have smelled like gas inside and outside the car.
I live in Pittsburgh too so maybe I can see you driving around
When do you think u will be done?
Use a pipe cutter, they make tiny one thatl fit through that small gap
from where you get the body kit of all the car ? thank you
Hey I’m getting a kit to build the vador for my first car and I was wondering if I could have a professional put it on for me is that possible or do I have to do it myself
several shops in orlando, Tampa, St pete but be prepared for 80-100k bill. . . + it way more fun to do it your self. Even if just learning - even with your mistakes you will be no where near that much $. good luck
how much would you charge to build mine
Love ur vids
Awesome!
That beat 7:48 😁
What color will it be
I think you might need more spacers
Damn man you basicly making an entirely new car for this kit to fit lmao
definitely not a kit - its a build. Most think vaydor is just a body kit you slap over the existing and done in 1 week.
this body kit plz give broo
I’ve been so hooked to this series that I can’t get that soundtrack outta my head in the outro of the video, what’s the song name anyone? Lol
the outro is T-Mass, Ignoring my heart
Pittsburgh Vaydor thanks bro! Can’t wait for this car to come along!
🔥🔥🔥🔥💎👏
Your wheels are not supercar level they look lost, you need the correct split rims to make your kit car look like a real Vaydor!
If can’t afford the wheels then really you should have just turned to a road car and tuned it up, this want help your image or credibility!
You my have been better off letting Vaydor build the car for you with a top class finish making the car saleable
We all look forward to the main paint work and finishing touches don’t hold off!
Hopefully my comments will help you with a very important point surrounding the quality
this body kit plz give broo
this body kit plz give broo
this body kit plz give broo