Mikeyyyyyyy wuttttt upppppp im rooting for you and this video brother, let me tell you one thing ~ being as the 10 GPM BEAST 💪 came from yours truly you know it’s gonna WIPE THE FLOOR UP 😂 Love ya man stay blessed
I didn’t think the 10 gpm would push that much farther. Nice test. Question on the Ar blend manifold; does the ball valve mess up the ratio of water to sh. Ive heard from others that to be accurate the water needs to be on a high flow metering valve as well. What are your thoughts? Love all your videos 👍
I wonder if the the engine is the difference maker or the pump. For example using the same pump on a Honda and predator engine to see what the performance. Nice video Mike.
let's see the 0060 tip up against the Davis shooter tip. Do I need to buy one and do this test?? I will, I bought the tall reach tip from Cody and the 0060 went 4 feet further!! Can the Davis tip hold up?
@@TheFreshRinse I will order one and do a test, putting the wand in my vise on the trailer so it is in the same spot for each tip. I will test all. 3. Davis, Tall reach and the 0060 tip that is in my J-Rod.
What is the speed difference between the machines when they are blasting a diamondback bmx bike up a half pipe, through a 1.8 injector, M5 Xjet… not M5 downstream, at 3/4 throttle, with 15 psi in the tires? Also, whats a good surfactant…. 😂
If you get yourself a 20 GPM you won’t even need to exit your truck. You could do a house wash from the air conditioned comfort of the passenger seat of your truck. Then head off to opportunity #12 for the day!
ZK1 unloaders are trash for 8gpm and 10gpm. They restrict flow because they're only 3/8" inlet. If you really want to have good performance and maintain it, you need to run 1/2" unloaders. 1/2" inlet, outlet and bypass.
Davis Shooter Tips makes a new and improved shooter tip for 8gpm & 10gpm. I got one and it really works a lot better.
Sorry for the late response. Thank you my friend!
Mikeyyyyyyy wuttttt upppppp im rooting for you and this video brother, let me tell you one thing ~ being as the 10 GPM BEAST 💪 came from yours truly you know it’s gonna WIPE THE FLOOR UP 😂 Love ya man stay blessed
BOOMSHAKALAKA!
This Is better than Hulu !
Well, yeah! LOL
dude you make the best videos.
WOW! Thank you!
I didn’t think the 10 gpm would push that much farther. Nice test. Question on the Ar blend manifold; does the ball valve mess up the ratio of water to sh. Ive heard from others that to be accurate the water needs to be on a high flow metering valve as well. What are your thoughts? Love all your videos 👍
Thank you. I’ve never actually tested it… but I’m confident it’s a bit off. Prolly not enough to notice.
They should have the same ball valve but also SH is 1.2 times heavier than water so that takes effect as well.
I wonder if the the engine is the difference maker or the pump. For example using the same pump on a Honda and predator engine to see what the performance. Nice video Mike.
Great question. I’m not sure.
Try measuring the height they spray that seems a lot more useful of a metric than straight out.
You are probably right
MIND
BLOWN
Like your hair in the wind!
BOOM!
Should have did the AR as well.
AR is down. I installed the electric start and now it won’t start. lol
10 for the win 🎉
BOOM!
Davis shooter tips came out with a new improved cylinder shooter tip for a 10 gpm I bet you will get over 70 feet with that and no wind!!
I’d be interested in trying it
mike do you Plan on using the 10 next year for soft washing>
It works fine for downstreaming, yes. I usually use the 8. The 10 is overkill.
let's see the 0060 tip up against the Davis shooter tip. Do I need to buy one and do this test?? I will, I bought the tall reach tip from Cody and the 0060 went 4 feet further!! Can the Davis tip hold up?
I’d love to see it as a test!
@@TheFreshRinse I will order one and do a test, putting the wand in my vise on the trailer so it is in the same spot for each tip. I will test all. 3. Davis, Tall reach and the 0060 tip that is in my J-Rod.
@@superblastpressurewashing.7256 have you done this test yet? What were the distances ? I am trying to figure out what one to buy
have you used a 10gpm 24v northstar pump? how does it compare to your ar45 if so
I’ve never used it. I’m really not sure!
Need to see that AR in action before the end of the season! 😎
I have several videos using it
@@TheFreshRinse this season?
@@sgbrospressurewashing Absolutely
@@TheFreshRinse sorry Fresh been watching too much of Joe Deery’s videos lol 😂 jk
@@sgbrospressurewashing Who? Never heard of him
I believe he does have 7-12 gpm dst
I’ll look into it
What is the speed difference between the machines when they are blasting a diamondback bmx bike up a half pipe, through a 1.8 injector, M5 Xjet… not M5 downstream, at 3/4 throttle, with 15 psi in the tires? Also, whats a good surfactant…. 😂
The speed with my 1983 DB Turbo is insane. Also, I don’t use surfactant, but when I do I use Eleminator.
@@TheFreshRinse i figured the turbo model would be nuts. I was kidding about the surfactant. Lol.
@@joeschmitz2790 LOL
If you get yourself a 20 GPM you won’t even need to exit your truck. You could do a house wash from the air conditioned comfort of the passenger seat of your truck. Then head off to opportunity #12 for the day!
@@LostAllFeeling I like the way you think!
Forget the hair I’m laughing at the thirsty beaver bar shirt……🤪😻😜. Wind…. I blame Joe ….😂😎
LOL A customer gave it to me!
12 Gpm = 73ft ? …
I’m assuming.
😮
I would like to see how far a 4 gpm would go!
Probably not much less. Just less volume.
Never be self-conscious about your hair. A lot of men would love to have your hair.
BOOM!
Making me want a 10 gpm lol
BOOM! I love mine!
zk1 unloader mr fresh rinse
Have one. Didn’t like it. Thank you my friend!
ZK1 unloaders are trash for 8gpm and 10gpm. They restrict flow because they're only 3/8" inlet. If you really want to have good performance and maintain it, you need to run 1/2" unloaders. 1/2" inlet, outlet and bypass.
@@retiredAF1994 I run zk1 on my 8 gpm with the flow pro No issues at all 9 gpm on rinse mode and 7.5 on soap application
Come on. You just made this video to get a free shooter tip from Cody 😉
Oh man, that’s actually a great idea. I seriously doubt he watches my vids.