tajmawall.com Decorative Concrete used to create the look of natural stone at a fraction of the cost. Reface a fireplace or interior of exterior walls.
I like the wood mixture thats pretty impressive..........Im a local installer in augusta ga. It works I've been using Flex-C-ment for about 4 years now.....Awesome stuff
These men are craftsmen and it shows. Can they go around corners too? Possibly no problem they just have a flexible gadget an than they can not be stopped! Beautiful work I like it! Cement is a wonderful product and it does last. If all fails break it down, recycle it and start fresh. It does forgive some of us but not all! Greetings from Australia, I will try it!
Wow love this looks good. I wanted something that was stone and timber looking on the outside but....was fire proof. You did it so well. Thanks for the video.
Have searched everywhere for this stamp which isn't to be found, instead I purchased a hard stamp off ebay. You simply fill with cement, let dry, take out, add cement to plywood and apply harden stone. The stone came out looking exactly as seen in video. Only set back was you have the set up time for cement to dry. Came out great. Cost was $100 for 10 molds.
Love the work. Its beautiful. What you have used? Cement, water, sand, tiles bond, or what? Please define pouring process with ratio how to make mixture
People interested in creating this look. Google "concreate stamps" and find a similar one to this video. Remember that your finished wall or pathway will only end up as good as the frame you build - so make sure that you give your self a strong base. Finally read how long the concreate has to settle before you begin stamping. It can be anywhere from a half hour to 6-7 hours depending on temperature/humidity and water content of the concreate mixture.
what is the release agent that they are spraying on the stamp before stamping the stucco and is there an educated way of knowing the mix ratio and what is the best kind of mix to use
probably "bubble gum" release. You can also use mineral spirits and I believe diesel, but not sure what the ratio is. mineral spirits evaporate and don't harm forms or the mix.
U can buy silicone in hardware shops (atleast in my country) , pick some decorative stone u like , layit as u see best in a plastic tray ( dimension of your liking but not 2 big and pour silicone over the stone ! There should be some tutorials on youtube ! But what these gents did is masterpiece .
There’s a channel called декор студия Capella using same video; are you associates? Beautiful and skilful work even if not real stone; can definitely tell it takes some knowledge to make it look almost identical
Great Video! I didn't know you could trowel on cement without metal lath. Im ordering stamps to do the front of my house. Does anyone know how long to wait after the cement as been troweled on to begin the stamping process? And can you apply concrete directly on to OSB?
Wow. Acabo de checar el precio del molde según el link the aquí y cuesta $650 dólares!!! A mi me hicieron uno con la parte interna de una llanta de camíon y me costó $65 dólares!! El ingenio Mexicano es infinito y maravilloso.
Hey, what about this...could you take material that you put under a tile floor...attach that to a wood structure...then mortar then maybe just rocks???
I hope you always keep this video up, because this is what I like to watch - to calm down - when I am stressed. Thanks!
Now that is absolutely fantastic! Great job to all who completed the wall.
This guy makes this look so easy. He is a real artist.
That rocks right there! Love the puzzle piece so you can see where to line it up perfectly. Amazing invention- the ideas are endless.
holly cow!!!.. this is the best decorative and innovative creation ive ever seen in life.
You guys know how to make it look real. Great Job.
YES!!! This is EXACTLY what I've been looking for!
This concrete Simulated Stone Masonry looks quite good. Will consider it for a cool home project.
Simplesmente maravilhoso!!! Congratulations from Brazil!!!!
I like the wood mixture thats pretty impressive..........Im a local installer in augusta ga. It works I've been using Flex-C-ment for about 4 years now.....Awesome stuff
real professional, thanks.
These men are craftsmen and it shows. Can they go around corners too? Possibly no problem they just have a flexible gadget an than they can not be stopped! Beautiful work I like it! Cement is a wonderful product and it does last. If all fails break it down, recycle it and start fresh. It does forgive some of us but not all! Greetings from Australia, I will try it!
the best I've seen , awesome talent!!
Love it, simple but elegant !!!
That is amazing , quality work and skill mate
Wow. That is a great form of art.
Excelente trabajo, se ve bastante natural, gracias por compartir.
very detailed work,nice
Looks great, great job guys
Wow love this looks good. I wanted something that was stone and timber looking on the outside but....was fire proof. You did it so well. Thanks for the video.
Muito bom, esse vídeo deve ganhar um prêmio. Muita criatividade e talento.!!
wow!!!! amazing!!! I also loved the music.
Nice Job!Easy for an artist like you.
Beautiful work!
Very Nice Finish! Great Work!
Wonderful to watch, thanks.
good to watch and see process - nice attention to detail - very professional :)
Have searched everywhere for this stamp which isn't to be found, instead I purchased a hard stamp off ebay. You simply fill with cement, let dry, take out, add cement to plywood and apply harden stone. The stone came out looking exactly as seen in video. Only set back was you have the set up time for cement to dry. Came out great. Cost was $100 for 10 molds.
awesome job I love it. muy bonito
amaising job with those molds.
Damn! This is true ART! You are the Men! :-)
Just amazing. Love it.
Great work, and fairly informative for a silent video.
Silence is Golden! Sometimes video narration is a bore.
Muy bonito, tengo una duda no le echas algun aditivo al molde para que no se le pegue mezcla
I liked this video because he is a good man.
very nice technique!
It is good demonstration of Thin Crete Vertical technology!
That is totally bad ass. That guy is talented.
BEST ONE I'VE SEEN SO FAR! BUT NO LINK For the molds!!
WOW great job . awesome .
Love the work. Its beautiful.
What you have used?
Cement, water, sand, tiles bond, or what?
Please define pouring process with ratio how to make mixture
Ahh parece fácil pero tiene que muy difícil hacerlo felicidades
A real craftsman
Very good, congratulations.
great work!!!
amazing. I will build my castle with this technique.
Polyurethane molds for creation decorative stone and 3D panel. Stamps for concrete and plaster
polymolds.com/
Site not working.
from where we buy this mold
wonderfull job. congratulations!
Nice work.
People interested in creating this look. Google "concreate stamps" and find a similar one to this video. Remember that your finished wall or pathway will only end up as good as the frame you build - so make sure that you give your self a strong base. Finally read how long the concreate has to settle before you begin stamping. It can be anywhere from a half hour to 6-7 hours depending on temperature/humidity and water content of the concreate mixture.
what is the release agent that they are spraying on the stamp before stamping the stucco and is there an educated way of knowing the mix ratio and what is the best kind of mix to use
probably "bubble gum" release. You can also use mineral spirits and I believe diesel, but not sure what the ratio is. mineral spirits evaporate and don't harm forms or the mix.
B
So much Brain goes into the concrete timming ...... you wouldhave to be a Mason.
Fantástica habilidade em imitar pedras com massa fresca de cimento queimado.
NICE job fellas
I love this job
Excelente trabajo los felicitos
U can buy silicone in hardware shops (atleast in my country) , pick some decorative stone u like , layit as u see best in a plastic tray ( dimension of your liking but not 2 big and pour silicone over the stone ! There should be some tutorials on youtube ! But what these gents did is masterpiece .
Sir its amazing work pls let me know from where i can get this moldings.
Very nice art . I like it
fantastic work may I ask where you can purchase flex c ment
There’s a channel called декор студия Capella using same video; are you associates?
Beautiful and skilful work even if not real stone; can definitely tell it takes some knowledge to make it look almost identical
Congratulatios, spectacular
Would the wood skirt around a house be a strong enough frame, or would I have to support it more somehow?
Wauuuuu me encanta, tremendo trabajo
this is great. I am thinking I could do this over a brick wall?
Excellent work, how you did the finish tree trunk
exelente video en donde puedo conseguir ese tipo de molde y a que precio mas o menos . Gracias
Great Video! I didn't know you could trowel on cement without metal lath. Im ordering stamps to do the front of my house. Does anyone know how long to wait after the cement as been troweled on to begin the stamping process? And can you apply concrete directly on to OSB?
This looks great, did anyone find out where to buy the mold and what cement is used, I have a garage wall I would have a go.Any details Thank you
that looks wicked!!! i would love a fence like that
Where can you get the stamps???????????????
great final product, like just like real rocks, where can I buy a stamp like that?
Nice job.
Where did you get those molds that was awesome also is the wood real or is that cement also?
Muito lindo!
Great work, so where can I find the stamp you used.
excellent job.plz tell the ratio of cement and sand.
eres una chica inteligente, dios te bendiga
Wow. Acabo de checar el precio del molde según el link the aquí y cuesta $650 dólares!!! A mi me hicieron uno con la parte interna de una llanta de camíon y me costó $65 dólares!! El ingenio Mexicano es infinito y maravilloso.
Good Job. You should try Elite Crete as well, they have very good training.
Que material utilizo y cantidad de cada una uno. Quiero hacerlo para mu casa. Me encanto.
Fantástico trabajo
parabems otimo trabalho
Very nice work, I would like to know about all material
Muy lindo. Gracias!
Great job
Hi, that was great gob...Please can you advice me where to bay the mold you was using? Thanks dear..
me ha encantado, pero como hago las planchas para hacer el dibujo en la pared?
What are the templates called they are amazing great work guys
where can I buy the stencils to do this work on a garage wall?
it's a masterpiece
Rest in peace my old man friend teacher
donde consigo esos moldes y que es lo que aplicas antes de marcar al cemento?
Excelente, pero como confecciono el molde
waw thats great realy ,quation what is the materials of the Rubber mold ?
Where can I find the rubber looking stencil like this to make a pattern?
wow, very nice
How the Wood engravings were made ? :-) Curious...
Donde se consiguen esos moldes para el acabado ?
Can you use quickcrete? or what type of concrete mix is recommended?
Es pared normal de ladrillos o es tabla roka con madera
From Germany...ists verry verry verry verry good:-)
sir tnx for sharing,,can you tell about the ratio of the sand and cement,,,and what is the liquid you spray thankyou so much..
Hey, what about this...could you take material that you put under a tile floor...attach that to a wood structure...then mortar then maybe just rocks???