How to Make a Garden Gate - cedar wood & ornamental cast iron
ฝัง
- เผยแพร่เมื่อ 25 ต.ค. 2024
- DeWalt Sliding Compound Miter Saw→ low.es/2Cln3Q0
Dewalt Miter Saw Stand→ low.es/2CoV01R
This summer I will complete the fence and hang the gate so look for that video later. To hang it I use two ball-bearing door hinges. The plans in the link below detail everything you will need. Apart from the ornamental iron, you can get everything from Lowe's. You can buy the cedar 2x4's and dog-ear boards in the lumber department.
My gate plans are downloadable here on my Patreon page→ / adamdiy
DEWALT 12-in 15-Amp Dual Bevel Sliding Compound Miter Saw Model # DWS779
DEWALT Aluminum Adjustable Miter Saw Stand Model # DWX723
______________________________
/ adamdiy
/ adamdiy.me
/ adamdiy
Email / Mail:
/ adamdiy
Disclaimer: Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not AdamDIY and or Adam Hill. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source. This video is only for entertainment purposes.
#LowesPartner #Spon #woodgate
Superb craftsmanship!
One little improvement suggestion:
The holes for the gate top assembly will be a liability for winter conditions, they will need to be filed to prevent water for going in.
I just finished one as well. Mine is slightly modified but the core is your design. Thanks!
Thank you Adam! We used your design and materials, and built our gate which came out perfect! We will be building our second gate tomorrow.
Thank you Adam for the beautiful design and plans. My carpenter replaced my old fence between the patio and the driveway with the fence & gate you have in your video. And it's gorgeous! His wife loves it so he'll have to make one for her, too.
@AdamDIY great craftsman ship like always haha. This is an awesome channel for people who like me, who's not super experienced but wants to make something more than a birdhouse lol. I only took one shop class in High School 4 years ago, but you make it easy to follow/understand. great work keep it up
WOW really nice project i really like it, thinking of doing some gates my self but first i need to purchase a house for my self DOH!
Hey Adam this was a great idea thanks for the inspiration.
Feels as if I have known you for years! Good to see another BIG Dewalt fan
Really nice work! Bravo sir.
Thanks for this video 👍
Beautiful
Another great project!
Well done Sir!
Thanks for sharing
You are awesome
Great video and thanks for the time and effort. Thinking of making this but instead of the bolts and straight cuts, using half lap joints with some pocket holes. Which would be more durable and best for longevity?
When using a sliding miter saw you should push and not pull through the cut. Video show pulling through the cut
Cool video though :-)
Very interesting design, thank you! But where exactly you bought those cast iron inserts (you show them @0:33). I googled a bit and couldn't find anything similar. To be more exact, I found some pieces, but they are too large, and not that much variety. Does that store you bought it from send their products?
What would be different if I wanted an oval opening?
Beautiful work!
Very nice. ty
Before hanging said gate what do you do about weather protection . Love the design want to make double gates 9 ft gap will i need cross member thanks . Steve 🇬🇧 UK
Great video. Where did you get the door latch?
#AdamDIY. .... I would take a paddle bit go in through the bottom of the two-by-four about 2 in and then I would drive my 3 1/2 screw into it to connect with the next board up.
I don't have a biscuit joiner to sure does make quick work for what you're doing! You're doing a bang-up job thanks for sharing I look forward to hear from you God bless bye for now Ken
PS:- how often do you upload videos bro?
What is the height and width of this gate door? Really liked the design. Thanks for posting!
Going to copy your work. Hopefully I can do it justice. Thanks
Just wondering what style of hinges did you use.
Hi Adam do you have written plans. I want to make a side gate near my fron door
Hey! This is amazing, I’m definitely going to try this myself. I’m curios though (sorry if I missed it in the video) but why are the vertical slats alternated between thick and thin wood? Is it for aesthetic reasons (it looks real nice!) or does it serve a purpose too? Thanks :)
I’m building this plan right now with wide and narrow slats as well, it’s about looks. The big lag screws are the meat bones that keeps the joints together-
I noticed no cross bar needed. Will this sag?
Hi Adam, where did you get the door knob/handle?
What keeps the gate from sagging since there is no diagonal cross brace that typical gates have?.
Such small gate no need for that. For what it looks like the joints are very well done and all you need is good hinges. There you have it
hi Adam, thank you for sharing this video, I am going to make a similar one, can you please tell me where did you get those black color design pieces? Thanking you.
I’m building this gate right now and using hummingbird/ leaf plant holder brackets in cast black got from Home Depot garden area
where did you get that handle?
Wowsa!
How tall is the gate ?
How do you approach for example lower to get tools free to do your project l want start up my channel on TH-cam all advice l thank you in advance
What are those metal pieces called?
Wrought Iron Scrolls
Didn't like the little rails with the finish nails. I felt were not durable enough for the outside. Maybe using a hardwood for that part in a different color to add contrast to the wood. Other than that nice job.
Ring the bell big thumbs up! New here to your community.
What's the trip to your success I have a home improvement Channel with the mixture of videos...
I look forward to hear from you any pointers? What would you suggest to improve my channel if you don't mind, and have the time. I hope to hear from you you're doing a great job keep up the great work God bless bye for now Ken
... how did you get Lowe's to sponsor you?
👌✌
Are you done with the HappyAtom channel?
Jason D not at all! I still have all the projects ready to work on and can’t wait to finish the travelers shield. Things have been a bit tough for me lately and it has not been easy to make videos. I plan on getting a HappyAtom vid up in the next few weeks or so. (Fingers crossed) Thanks for the support!
@@AdamDIY Cool. Appreciate your content both here and there!
glued and scewed. what happened to conventional joinery?
An advert for a DeWalt mitre saw.
I did it with Woodglut.
I have done very similar with Woodglut designs.
R you single? If not who is the lucky woman.... she's lucky to have you
want to watch how to build a gate not a tool advertisement
Uhhhh, you are the middle man