Washer/Dryer Stacking Kit Installation W10869845

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 ก.ย. 2024
  • Buy part W10869845 now: www.repairclin...
    Tools used: 9/16" wrench, adjustable wrench, slip-joint pliers, flat head screwdriver, Phillips head screwdriver
    Buy part 426 now: www.repairclin...
    Buy part 181CB now: www.repairclin...
    This video provides step-by-step instructions for installing a stacking kit, which can be used to vertically stack a washer and dryer. Please note that you will need an assistant to lift the dryer.
    Additional dryer repair, troubleshooting tips, help with finding your model number, and part replacement videos: www.repairclin...
    All of the information in this stacking kit installation video is applicable to the following brands: Amana, Maytag, Whirlpool
    Connect With Us!
    plus.google.co...
    / repairclinic
    / repairclinic
    / repairclinic
    Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
    Check out our blog: www.DIY.RepairC...
    Don't forget to like and comment on this video, and subscribe to our channel!

ความคิดเห็น • 68

  • @OwnYourOwnBus101
    @OwnYourOwnBus101 4 ปีที่แล้ว +61

    Repair clinic, I get the feeling we all came to this video for the same explanation: How to hook up the washer dryer connections behind the two units in such a confined space? Could you please do a video on that? If you have one can you post it in the comments?

    • @rickf659
      @rickf659 7 หลายเดือนก่อน

      I was about to say the same thing.

  • @AriannaAyers
    @AriannaAyers 27 วันที่ผ่านมา +1

    This is my favourite channel on TH-cam. My children think the channel is fascinating, and lovely as well.

    • @repairclinic
      @repairclinic  10 วันที่ผ่านมา

      We appreciate your support!

  • @blessedarmadillo8257
    @blessedarmadillo8257 2 ปีที่แล้ว +11

    That you, Mr Robot. Your warm, sonorous intonations have reassured me and will propel me to complete my project with great alacrity.

  • @hannagoodbar6596
    @hannagoodbar6596 5 ปีที่แล้ว +33

    Missing: how to attach the dryer exhaust. You can see round flexible exhaust in the first open closet shot. Glossed right over that step.

    • @Ereaes
      @Ereaes 3 ปีที่แล้ว +4

      Install "according to the instruction manuals."

    • @ericwhitedude
      @ericwhitedude 2 ปีที่แล้ว +1

      @@Ereaes - Bwahhh hhhahh!!!

  • @jonnychingas5757
    @jonnychingas5757 5 ปีที่แล้ว +8

    What about the washers water hookup and dryer exhaust and electric connections??? These appliances don't have any???

  • @mrsatire9475
    @mrsatire9475 4 ปีที่แล้ว +11

    How did you hook up the dryer vent hose?

  • @salvadorhpo2030
    @salvadorhpo2030 5 ปีที่แล้ว +33

    I always get hungry while doing the laundry. Please explain how to install a microwave between washer and dryer.

  • @leuchtag1
    @leuchtag1 5 ปีที่แล้ว +43

    You should include how the exhaust vent will be SAFELY installed in your stackable inside a cabinet!!!

    • @ZeitGeist_TV
      @ZeitGeist_TV 5 ปีที่แล้ว

      Clyde Leuchtag Electric dryers don't need as much space as a gas dryer would. Also the most you would deal with is condensation depending on the setting you use it on.

    • @multi-wreckz712
      @multi-wreckz712 5 ปีที่แล้ว +6

      Yes they do! All dryers need to have a good vent installation. Or else you will have a restriction. And a small cabinet means you won’t be able to go back there and shortened the vent.

    • @jeffcostanza6802
      @jeffcostanza6802 3 ปีที่แล้ว

      When was the 1st front end motor stackable made

  • @sethmiller6201
    @sethmiller6201 2 ปีที่แล้ว +3

    Is there a video for the dryervent yet?

  • @louislaplante4838
    @louislaplante4838 3 หลายเดือนก่อน +1

    You guys make it look easy. Great job

    • @repairclinic
      @repairclinic  3 หลายเดือนก่อน

      You're welcome!
      We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
      We hope that you have a great day!

  • @kellismith4329
    @kellismith4329 3 ปีที่แล้ว +1

    The vent installation will be unique to it’s surrounding/positioning, youcan also reverse the swing of the dryer afterwards so they both open and close the same direction as it is inconvenient to use them that way.

  • @angelsolares8801
    @angelsolares8801 2 ปีที่แล้ว

    this kit can be used for a frigidaire washer and dryer, and another question this is similar to a rack to place the dryer over the washing machine

  • @skysoul2022
    @skysoul2022 6 ปีที่แล้ว +8

    How do you remove the screws that connect the washer to the dryer if there's no space to squeeze around behind the appliances to unscrew them? That's our issue ... we can't pull the appliances out because they need to go over a piece of hardwood to come out (thus we need to pull out one appliance at a time), & we can't reach the screws to unscrew the dryer from the washer. Thank you!

    • @fan3002
      @fan3002 3 ปีที่แล้ว

      Did you figure this out?

    • @skysoul2022
      @skysoul2022 3 ปีที่แล้ว +4

      fan3002 We hired someone who very carefully pulled both out at once using with what little wiggle room we had to work with. He wrapped some sort of strong belt around the one on top to help pull them out. It was super challenging though.

    • @fan3002
      @fan3002 3 ปีที่แล้ว +2

      @@skysoul2022 Understandable. Mine is upstairs and it has a drain pan underneath it that is plastic and I can just picture this getting broke. I knew when I bought the home it was in a bad place but I had to go with it.

  • @user-ql8dx2rl7x
    @user-ql8dx2rl7x ปีที่แล้ว

    STEFAB STACK WASHER DRYER MODEL-STX 10
    Drum motor not running motor perfectly ok

  • @LilGrimey5Star
    @LilGrimey5Star 2 ปีที่แล้ว

    Where does the heat from the dryer go when it’s in use though?

  • @minnesotadryerventguys
    @minnesotadryerventguys 2 ปีที่แล้ว

    So home owners doing this.... We need access to the back of the dryer & Remember you do not want to use flex ducting on a gas dryer. Why? because it traps the lint in the crevasses, also messes with the air flow, which will cause a back up in the line and then carbon monoxide comes into the house from the air holes in the dryer, please install a CO detector in the laundry room!! Don't rely on a smoke detector in the center of the house. you need time to get out before the gases get to the center of the house. Most of us dryer cleaners see this one a week. looks pretty but really makes it difficult because doing this causes safety issues. as great as it looks... it's not safe.. your dyer has to breath as well.

  • @francoisj.interiors2090
    @francoisj.interiors2090 6 ปีที่แล้ว +6

    I have problems with all BOSCH products?? Unhappy with the quality at all.

  • @crewkittylove
    @crewkittylove 5 ปีที่แล้ว +4

    Would this work for a kenmore elite?

  • @CMARTINEE123
    @CMARTINEE123 5 ปีที่แล้ว +3

    is this for any 27" washer dryer say if you have mixed brand units?

  • @ivancurtis
    @ivancurtis 2 ปีที่แล้ว

    Two absolute studs

  • @mattalbrecht7471
    @mattalbrecht7471 6 ปีที่แล้ว +2

    But ow do you make the dryer vent, water, and discharge hose connections? i am building an enclosed washer & dryer "closet" and space will be tight, but it will meet the requirements you set for venting and stuff. how do you connect the hose and dryer vent and stuff, then scooch it back into the closet?

    • @punker4Real
      @punker4Real 6 ปีที่แล้ว

      Attach the hoses before hand duh

  • @justchillins1c3l46
    @justchillins1c3l46 3 ปีที่แล้ว +1

    Where do you get this bracket from? I asked lowes and home depot and they dont have stacket kits like this? Id like to buy please.

    • @justsaying5753
      @justsaying5753 ปีที่แล้ว +1

      Got mine on Amazon

    • @vdarr1
      @vdarr1 ปีที่แล้ว

      Will this work on whirlpool wfw93hefwo

  • @josebenedico7379
    @josebenedico7379 7 ปีที่แล้ว +3

    How do I clean the dryer conduct? It's hard to pull out both machines at the same time out of that hole

    • @punker4Real
      @punker4Real 6 ปีที่แล้ว +3

      get two strong dudes from homedepo

    • @user-kf2vv4dt2k
      @user-kf2vv4dt2k 5 ปีที่แล้ว +1

      Wet the floor. Once the feet become wet. The whole unit will skate out

    • @NoName-zz8nl
      @NoName-zz8nl 3 ปีที่แล้ว

      @@user-kf2vv4dt2k 😆😂

  • @LilianaMartinez-jt5mk
    @LilianaMartinez-jt5mk 3 ปีที่แล้ว

    just to disconnect a washing machine this place called Toronto decorating charged us $850

  • @anthonygilmore5969
    @anthonygilmore5969 2 ปีที่แล้ว

    Thank you so much for this.
    It helped me a great deal.
    Have a great day.

  • @antoniomelendez3919
    @antoniomelendez3919 6 ปีที่แล้ว +2

    That was a great and simply put diy video thank you 🙏🏻👍😀

  • @sethhorst6158
    @sethhorst6158 5 ปีที่แล้ว

    How do you remove it? The house I'm moving to with my family has a stacked unit installed blocking the stairways to go up and down leaving the wooden stairs outside as the only way to go upstairs an downstairs.

    • @lpsmlp4570
      @lpsmlp4570 5 ปีที่แล้ว

      It's should never block the stair ways that's stupid

  • @skybuck2000
    @skybuck2000 4 ปีที่แล้ว

    Always handy when there is no de-install video and manual lol.

  • @hansenland
    @hansenland 6 ปีที่แล้ว +2

    Very very helpful. Thanks!

  • @Cookmozter01
    @Cookmozter01 4 ปีที่แล้ว

    I need the correct measurements on everything

  • @jeffhardman73jh
    @jeffhardman73jh 4 ปีที่แล้ว

    I did not hook shit up they just put it in place

  • @TheCuringa123
    @TheCuringa123 7 ปีที่แล้ว +1

    How do I get the stuff to put together? The ones on the video?

    • @puddgyballerina1
      @puddgyballerina1 5 ปีที่แล้ว

      Contact your dryer's manufacturer if it's not in the bag you should have received when it was delivered--it should also contain the drum locking pegs

    • @erinkstaton1118
      @erinkstaton1118 4 ปีที่แล้ว

      Stackable kits can be purchased separately at home improvement stores.

    • @NoName-zz8nl
      @NoName-zz8nl 3 ปีที่แล้ว

      In general all it is, is a mending plate

  • @adoptedchineseboy
    @adoptedchineseboy 6 ปีที่แล้ว +1

    Is it possible to stack 2 washers instead of 1 washer and 1 dryer?

    • @doom6787
      @doom6787 2 ปีที่แล้ว +2

      No, washers move a lot and they could make the entire tower fall, and they are a lot heavier

  • @bentcn8511
    @bentcn8511 3 ปีที่แล้ว

    heavy

  • @erickmatamoros7281
    @erickmatamoros7281 11 หลายเดือนก่อน

    2:47

  • @hoperules8874
    @hoperules8874 3 ปีที่แล้ว

    mmkay...no instructions on how to lift the very heavy full size without summo-wrestlers around...

  • @vdarr1
    @vdarr1 ปีที่แล้ว

    Seeking stack kit for Mid # wfw93hepwo