@@electron1012 I thought that too... Especially when the air-compressor came on while they were putting the first one on, with the speed increase on the video I thought they were doing the Big-Rig horn on purpose... Then I realized, Air tools, so ... Air compressor LOL!
Freaking bad A$$. Beautiful look. I need to build one now. I'm currently building my 6year old an old 70s go kart restoration. I think one of these is next. Good work man.
Witam i pozdrawiam!!Super motocykl trojkolowy zbudowaany wlasnymi rekami,duza wiedza z tej dziedziny,frajda z jego zbudowania i zlozenia,prawdziwy majstersztyk,swietny material filmowy ,tak trzymac!!
I am only watching this because I watched colinfurze built one than I wanted to build one and the engine in this is the one that I am using. (I wanted to know how strong it was)
I really want to build something like this but don't have something to cut the metal or to weld. What cutter did you use? I can buy the cutter and have my cousin who is a welder do the welding for me
Would you be inclined to make a video about what makes a good drift trike like tire width or axle length and specifically front tire size and width and what difference they make thanks for your time
Where do you find the square framing metal like that? I'm building my own setup and have been using scrap pieces from other junked gokarts. It'd be nice to have a fresh start rather all used pieces that I sand blast. Takes forever.
That was friggin sweet. Thanks for the build vid.
That is so danm bad ass!! Great job man!! I want one now lol lot better then my Dukes of Hazzard big wheel i had as a kid haha
Looks great . Love the fact you made mud guards for the tires but never bothered with a chain guard lol
The mud guards really stood out. Like a rig
@@electron1012 I thought that too... Especially when the air-compressor came on while they were putting the first one on, with the speed increase on the video I thought they were doing the Big-Rig horn on purpose... Then I realized, Air tools, so ... Air compressor LOL!
thatsxbecause mud gets in your eyes but chains rarely do.
Blue on blue racing make your own and put a chain gaurd on it
low probability of chopping your fingers off is far less concerning than very high probability of getting mud in your hair
That's a whole world of fun. Thanks for sharing.
I felt like I was building with you. Really well shot and edited.
That is one of the coolest little machines I have ever seen.
Thank you!
Really cool build!!!!👍
That thing is pretty sick👍
killer build !! looks fun as hell.
Nice build. Zero BS. Thats what I like.
Awesome project!!!!. Next one do a shop compressor silencer cabinet!.... subscribed!!!!
Lol
Wtf even is that
Bro is insane I like it
nice it slides like a beast
Looks fun as sh*t, feel like building sumpin similar...definitely wouldn't be as good as this tho!! Good job bro!
Freaking bad A$$. Beautiful look. I need to build one now. I'm currently building my 6year old an old 70s go kart restoration. I think one of these is next. Good work man.
can i get the measurements for everything please.
I've gotta do a school project in metal and this is really cool.
Cara que projeto irado ficou muito bom fantástico
AWESOME BUILD. Duuuude
Man these Chipmunks got some skills man!
I enjoyed watch these guys build things from scratch.
How did you not have more views and subs you throw out cool custom stuff!
melhor de todos!!
Witam i pozdrawiam!!Super motocykl trojkolowy zbudowaany wlasnymi rekami,duza wiedza z tej dziedziny,frajda z jego zbudowania i zlozenia,prawdziwy majstersztyk,swietny material filmowy ,tak trzymac!!
Like my daddy always said "measure once weld once" 😂
Measure twice cut once
anief riley like I always say guess the Kuwaiti weld her to fit
@@crazywormy5869 for real
we must of had different fathers
my grandfather, in Russia, always said "measure seven times, cut once", but I did not listen to him :(
excelente muy bueno felicitaciones
1:21 Sounds like the furnace in old school runescape haha
Вообще дрифт трайк для асфальта! По грунтовке впервые вижу! Наезднику респект там от тряски зубы повылетать могут!
That's exactly what I was thinking!
Лесно се преобръща на асфалт.
Honestly that looks like so much fun I'm going to get out the everlast welder and start making one for myself.
Awesome what everlast do you have?
Everyone needs one of these lol
BAD ASS MAN!!! Love your builds keep it up!
Great welding skill!
Out of all the mig welders I've seen has the right technique
That looks heavy af
I liked it, very practical and useful.
Bravo champion rien a dire un vrai
Now that looks like Soo much fun I would spent all my time drifting around!!!!phucken awesome build nice job keep drifting bro!!
thank you
Would really like to know the measurements of each cut
Nice mig welds!
That music though 💪
i subbed awesome work hope u make more vids
thank you
MUITO BOMMMMM CARA
PARABÉNS
Kreatif tenan Kowe bro...
Yes you can buy these and the V2 720cc on Amazon if interested.
Excelent work great job
Ficou show
good job!
Well young man your a extremely good metal building man
thank you!
This frame can handle a BoostedBusa engine ... Overkill ... Good job
That woudl be awesome
Great build ! can you put a list of the parts need it to build it thanks bro
Simplesmente criativo e gosto de pilotar.
Cool music! 🤟
What size rectangular tubing did you use including thickness. It's a nice design and I like how you fabricated you fender flares as well nice touch.
Looks like 1" x 2"
Definitely a build Colin Furze would be proud of, Hope you're wearing you safety tie!
I am only watching this because I watched colinfurze built one than I wanted to build one and the engine in this is the one that I am using. (I wanted to know how strong it was)
Прикольная тачка 😀👍👍👍
That looks way too fun...
Badass!
like the idea that your have with the drift trike
The octagon pieces are 22.5? But what's the length on the lower frame and neck risers
Sweet ride Looks like a lot of fun. Put a chain guard on it tho 😬it would hurt like an S.O.B if that chain ever brakes
I really want to build something like this but don't have something to cut the metal or to weld. What cutter did you use? I can buy the cutter and have my cousin who is a welder do the welding for me
hello and good job for this project
what is the size of weels and the size of tires that you are using in this project I wait for your response
Parabéns, show de projeto.
The drift of the spine
Wtf the sound! DUDE!
Top das galáxias
Jos gandos sega ndog
thanks
Would you be inclined to make a video about what makes a good drift trike like tire width or axle length and specifically front tire size and width and what difference they make thanks for your time
Awesome!
Awesome as good job 👍
Hi. I'm sorry for bothering, but a prefix you have the tricycle :)
sick!
Ficou bonito
I wonder how da lil kidd felt when they came outside to find half there bike missing lol 😆 lol
where do you get those bearings at i can only find cheap pillow blocks
Hola..te quedo re lindo
Where can I purchase one?? Nice ride!!
Where do you find the square framing metal like that? I'm building my own setup and have been using scrap pieces from other junked gokarts. It'd be nice to have a fresh start rather all used pieces that I sand blast. Takes forever.
Metal supply
Está interesante hacer uno 😁
That is the coolest
Amazing
I'd like to see this build with the stingray chopper handles
You shit men fuck ahh ohh fuck
that was scary @ 10:39 wow.. nice control buddy... and just tighten that fuel tank up a bit, was shaking crazy on rough terrain...
De show 👍
Looks more polished than Mr Colin Furze's build. 👍
True but Colin's actually drifted on tarmac not on dirt with oiled tyres! Plus he set out to make it with only basic tools, no welding etc.
Cool
Cool!!!
You have plans... or just make it up as you went? If plans where can we get some? thanks. Really, really cool!
just came up with it as i went
very cool
This is super COOL...😎
Thank you
Amil Hasan I agree
Can we see some videos on your dodge Cummins
🙃🙋🏼♀️👍
No entiendo ni jota de lo que dicen en los comentarios jajaja pero esta muy bueno el triciclo
good morning, i would like to know the measurements, i loved the project!
buenos días, me gustaría saber las medidas, ¡me encantó el proyecto!
Muito legal...
Perfect subed
That's Bad !!👍
Хочу себе такой!!!
Good job
I’d love to ride all the vehicles u make
Or to send Ally Kalach or so-called movement interval