A very thorough discussion of power dissipation in all of those elements. Good practice to strengthen our understanding of all of those different equations for power in relation to voltage and current and resistance!
Very well explained the way it is complicated. But current limited power supply sometimes need different way of calculation under the output power in load!
Sir/mam can you please suggest any book Or article on the this topic for deeply understanding regarding energy dissipated in more electronics componentslike transistor, capacitor(polarize, mica, ceramic, etc) etc
The Organic Chemistry Tutor sir, in problem 4, if the value of the resistor changes, does the voltage drop would still be the same of 5.4 volts. thank you
Can anyone explain why if i use the other formula (V^2/R) im getting different numbers? With this formula the P=3600/20=180W for the 1st resistor and P=3600/10=360W for the 2nd resistor, much more than what we get by using I^2*R.
Then why dont i get the same numbers? If i use the V^2/R formula i get 60^2/20 for the first resistor which is 180W and 60^2/10 which is 360W for the second. What am i missing here?
So I found the total resistance Rt first, which is the inverse of the sum of the inverse of each resistors. Then plugged that into the P=VI, after I found I from V=IRt. But I got P = 66.66W. What did I do wrong?
one year late but it seems you were working with resistors in parallel. the current for resistors in parallel are not the same, but the voltage is. use V = I * R to find the current for each resistor then you can use any of the equations for power. you could even skip the step to find current and do P = V^2 / R, however it might be better to find the current anyways if you get asked about it in future questions
Better this time. But ... power is not equal to heat. It is equal to ALL of the work occurring in the system. Your example of an LED demonstrates the idea. How much work is involved in light emission? A nasty example is something like micro-phonics. Check it out. 40 years of teaching this stuff has convinced me that citation to the actual technical terms allows students to dig a little deeper on their own. In this case, you could have easily cited KCL and KVL. If you stick to what you know rather than what you Google you do better.
Final Exams and Video Playlists: www.video-tutor.net/
This man is the true hero
A very thorough discussion of power dissipation in all of those elements. Good practice to strengthen our understanding of all of those different equations for power in relation to voltage and current and resistance!
Thank you, I was wondering why I kept on getting different values. I was using the ohm of each resistor rather than the total resistance.
Very well explained the way it is complicated. But current limited power supply sometimes need different way of calculation under the output power in load!
TH-cam tutorial GOAT tutor 🐐🥰🥰🥰
How?
Or are you a fool?
Thanks.. Allah apko hamesha Khush Rakhy Ameen
I m an Indian🇮🇳........ Love ur work.... 🤟
Thnx
This dude carrying me through my freshmen engineering and pre calc classes
Well explained with example, thanks for sharing.
Happy teaching ✌️
Can you by a chance make a video regarding the science behind diodes? Like N-type, P-type, Holes etc?
Now this is a sexy lesson
tf
As always , great explanation.
wow is it really that hard for school networks to explain this?? It is so simple if taught CORRECTLY
Topic is understandable it’s just that sometimes I get confused with the formulas to use. Any tips?
Thank you well explained I now understand
thank you for your time,
The formula for total current is I= V/R, you have I= V^2/R. But other than that very informative, thankyou
V^2/R is for power (Watts), V/R is for electricity (Amps)
Am I the only one who smiled at 8:11
Thanks for explaining.
0:39 series
4:22 parallel
Hi, which software you use to explain those topics? I wanna use it
Shut up
Sir you the best
Sir/mam can you please suggest any book Or article on the this topic for deeply understanding regarding energy dissipated in more electronics componentslike transistor, capacitor(polarize, mica, ceramic, etc) etc
The Organic Chemistry Tutor
sir, in problem 4, if the value of the resistor changes, does the voltage drop would still be the same of 5.4 volts. thank you
Thank you so much 💓
Thank you so much man
wish you would shwo that V2/R works aswell,, had me second guessing myself
That LED has also some internal resistance, so current will be even lower than 0.054amps..
Can anyone explain why if i use the other formula (V^2/R) im getting different numbers? With this formula the P=3600/20=180W for the 1st resistor and P=3600/10=360W for the 2nd resistor, much more than what we get by using I^2*R.
It is because, resistors connected in series have different voltages.
Thank you. Brother
thaqnksssss once again
Excellent
I have a 5x 5watt led lights and 3 pendants lights what is the IB of the circuit? Pls any help?
great video think that the sume of the power is supposed to be equal to zero so the V source should be negative :)
Can I calculate of each resistance power by P= V^2/R Formula?
Yes
Then why dont i get the same numbers? If i use the V^2/R formula i get 60^2/20 for the first resistor which is 180W and 60^2/10 which is 360W for the second. What am i missing here?
Thank you
So I found the total resistance Rt first, which is the inverse of the sum of the inverse of each resistors. Then plugged that into the P=VI, after I found I from V=IRt. But I got P = 66.66W. What did I do wrong?
one year late but it seems you were working with resistors in parallel. the current for resistors in parallel are not the same, but the voltage is. use V = I * R to find the current for each resistor then you can use any of the equations for power. you could even skip the step to find current and do P = V^2 / R, however it might be better to find the current anyways if you get asked about it in future questions
What a god
Thanks sir
goated
You da man
Nice
Good
Better this time. But ... power is not equal to heat. It is equal to ALL of the work occurring in the system. Your example of an LED demonstrates the idea. How much work is involved in light emission? A nasty example is something like micro-phonics. Check it out.
40 years of teaching this stuff has convinced me that citation to the actual technical terms allows students to dig a little deeper on their own. In this case, you could have easily cited KCL and KVL.
If you stick to what you know rather than what you Google you do better.
no one cares
FIRST! Love ur vids man
Yasir Rizwan ✌️
Got an exam in 2 hrs am I cooked?
Bro where is organic chemistry in your channel 😂😂😂
All topics related to electrical engineering