2016 Kia Rio Ex Trunk latch issue

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ก.ย. 2024
  • Trunk would not open, lever inside the car, turning the key and the emergency release inside the trunk would not open the trunk. My car is pretty much fully manual not very many electrical parts on basic components. I have to actually use my key to open the trunk and car doors.

ความคิดเห็น • 38

  • @jimrhea5484
    @jimrhea5484 2 ปีที่แล้ว +2

    Thank you Eric. Had the same problem. Superglue didn't hold very long even after a thorough cleaning with contact cleaner and alcohol using a Q-Tip. Resorted to epoxy. It's drying now. They must engineer it to break in case of emergency. it is a trunk that does not need to be slammed, but the best I can figure, someone did.

  • @fadikaddoum
    @fadikaddoum 3 ปีที่แล้ว +2

    1:07 saved my life and battery, i have a Cerato and due to a light accident the indicator on the dashboard was always on and draining my battery (knowing that the trunk works normally) so i simply disconnected the cables for now until the end of the lockdown so i take it for fixing, thanks a lot man...stay safe

  • @yahswrestler
    @yahswrestler 2 ปีที่แล้ว

    This video was pretty helpful as my mostly manual Kia Rio 2016 had the same latch issue but because of that, I actually couldn’t release the truck from the metal latch keeping the trunk closed. Had to unscrew that and break the black plastic piece of of the trunk latch to free it and finally release the trunk. Now off to target for super glue! This will be the quick fix for now.

  • @carlosnorvik1585
    @carlosnorvik1585 5 ปีที่แล้ว +6

    Hi, it is stress crack induced by the spring. I’ll screw a screw into the little hole to hold that end of the spring, otherwise the plastic part will soon break again.

  • @brucelaw3137
    @brucelaw3137 5 ปีที่แล้ว +4

    my car had same exact problem, thank you for this tutorial

  • @rocketmanpm
    @rocketmanpm 4 ปีที่แล้ว +4

    Identical break just two hours ago. Kia: Make it in metal!

  • @mnuncio8793
    @mnuncio8793 5 ปีที่แล้ว +4

    Thank you very much I fixed mine on my 2017 Kia Forte

  • @ivan23caravantes44
    @ivan23caravantes44 5 ปีที่แล้ว +3

    Great video, just got the same problem last night. Thank you thank you.

  • @tashamckiver5344
    @tashamckiver5344 2 ปีที่แล้ว +1

    Great info. You’re a lifesaver

  • @TheGadagada
    @TheGadagada 2 ปีที่แล้ว

    Thank you so much 💓. I had the same problem. Kia forte 2017. I have used your way to fix it.before glowing remember to clean the place well with alcohol. I have used an epoxy glow. Kia shame on you for this junk plastic

  • @garvinroderique1928
    @garvinroderique1928 5 ปีที่แล้ว +5

    This same thing happened to mines,I use krazy glue along with epoxy 4 steel it worked

    • @muniz1982
      @muniz1982  5 ปีที่แล้ว

      The dealership changed it out for free it was considered under warranty.

  • @blacch
    @blacch 4 ปีที่แล้ว +1

    Thanks a lot man easy and simple. I had the same issue.

    • @muniz1982
      @muniz1982  3 ปีที่แล้ว

      You're welcome!

  • @shay1kay
    @shay1kay 11 หลายเดือนก่อน

    Great video I need someone to fix mine loll

  • @Jose891_
    @Jose891_ 5 ปีที่แล้ว +2

    is this maybe the same problem with kia rio 2018 ?

  • @joeycarter8846
    @joeycarter8846 5 หลายเดือนก่อน +1

    So how did you get the trunk open in order to work on it?

    • @muniz1982
      @muniz1982  5 หลายเดือนก่อน

      Pulled down the back seats and pulled the trunk release on the inside

  • @AbbsJr
    @AbbsJr 5 ปีที่แล้ว +1

    Great video thanks alot I have the stupid problem

    • @muniz1982
      @muniz1982  5 ปีที่แล้ว

      AbbsJr you might be able to fix it but it turned out for me I had to get it replaced after all. The super glue didn’t hold. Maybe if you can find the piece at a junk yard but will be really hard since the car isn’t old in case your car isn’t under warranty

    • @AbbsJr
      @AbbsJr 5 ปีที่แล้ว

      @@muniz1982 hmm, did you try the resin glue? Where you mix two different sticks together?

    • @muniz1982
      @muniz1982  5 ปีที่แล้ว

      AbbsJr I did not I just used the regular super glue in the tubes

    • @puffinvader
      @puffinvader 5 ปีที่แล้ว

      But how do you open the trunk to get to the latch?

    • @muniz1982
      @muniz1982  5 ปีที่แล้ว

      Cindy Gibbs unfortunately you have to get in through the back seat. I used a flat head to open the lock from where it was engaged to the metal hook that the latch was latched to.

  • @LarryIsReal-z7p
    @LarryIsReal-z7p 2 ปีที่แล้ว

    I have this issue and my 4 door Kia Rio 2013 doesn't even have the front seat lever to open the trunk/boot, so bizarre, even my manual says it should be there!

  • @ainoladli9143
    @ainoladli9143 5 ปีที่แล้ว +4

    Had same problem, try super glue it but failed. So i buy new one..

  • @nice2knowyou899
    @nice2knowyou899 5 ปีที่แล้ว +2

    What do you call that replaced piece? Im planning to buy one.

    • @muniz1982
      @muniz1982  5 ปีที่แล้ว +1

      Mike Cabatino honestly not sure since the whole price comes together. It was actually covered by the dealership but I couldn’t find the actual plastic part by itself.

  • @alaaahmed-pk4bo
    @alaaahmed-pk4bo 5 ปีที่แล้ว +1

    My rio open with remot ... but not open by bottom ?? Can you help me ?

    • @muniz1982
      @muniz1982  5 ปีที่แล้ว

      alaa ahmed sounds like you might need to check at the latch or something might be wrong with the lever at the bottom of the seat.

  • @ivan23caravantes44
    @ivan23caravantes44 5 ปีที่แล้ว +2

    It was that part for me I tried but super glue didn't help me. I guess I have to buy new part

    • @muniz1982
      @muniz1982  5 ปีที่แล้ว +1

      Ivan 23 Caravantes yeah I super glued it too held up for like two seconds the dealership was able to replace it for free for me. I’m glad because it was like a $70 part

    • @ivan23caravantes44
      @ivan23caravantes44 5 ปีที่แล้ว

      @@muniz1982 yeah that part is $96 here I had to buy it, then it worked like new. Just gonna jb weld the other one and hope I can use it some more because it just needs to be glued to work. Jb weld is supposed to be way stronger than all other glues

    • @ivan23caravantes44
      @ivan23caravantes44 5 ปีที่แล้ว

      @@muniz1982 luckily that part fits a lot of kias & Hyundai vehicle's even the stinger has one.

    • @ivan23caravantes44
      @ivan23caravantes44 5 ปีที่แล้ว +1

      @@muniz1982 thanks again for your video, it does really help a lot. Even if people don't mention it to you.

  • @sbohmeyiwa2873
    @sbohmeyiwa2873 2 ปีที่แล้ว

    Since yesterday my 2017 kia rio sedan boot refuses to close😭😭

  • @Sytijinx
    @Sytijinx 3 ปีที่แล้ว +1

    This is amazing. It's an indictment on Kia. F-----g plastic!

  • @davemurphy4056
    @davemurphy4056 3 ปีที่แล้ว

    $25 on Amazon