I’ve tried this before on my corolla Ae111 and thats a hot air intake ( open pod ), its fun to drive when your engine is still in normal temp or in the morning but by the time your engine is hot and the weather is too hot you’re losing power caused of the hot air intake. Drop in way better for daily driving, if you dont like the design thn you should go for cold air intake simillar to open pod but the filter need a box that sucks cold air front the snorkel under the bumper..
good job for a budget idea. other than heat you could probably get away with mounting the filter directly without any pipes or get a small straight section.
There’s 2 much air going into the engine so the system is compensating that by adding way more fuel. (doesn’t mean more power ) Which can decrease your hp and fuel efficiency, and can cause the car to bug down . Btw if u haven’t notice it’s a really small engine and a really big filter. Don’t do this crap😔 Also since it’s a hot air intake u will lose power when the engine gets hot 👍
Hey just wondering, there is an electrical plug that goes into the stock air box on the top side, if i’m using the open filter, where do the plug goes?
If it’s the IAT plug I’m thinking of, I just drilled a small enough hole on one of the pipes to put the IAT sensor plug into the new system. I also used the rubber O ring from the stock air box to the new custom system to secure it too (I placed mine on the rubber silicon near the throttle body)
I used the oem rubber grommet from the stock intake box 😅 I forgot what size drill bit I used, but you could probably drill using a small drill bit and work your way up slowly til it just fits the rubber
Yeah pretty sure without the sensor plugged in it’ll show the engine light. I think I forgot to show it, but I actually have the sensor plugged in. I just drilled a hole big enough to plug the sensor in, I drilled it at the back of the silicon hose just before the metal pipe 🙂👍
Im planning to do the same thing but i got some friends telling me its not good for engine and its going to cause problems. So now i want to ask from anyone here how is that possible. And if it does give problems how can i prevent them.
Tbh not really. It'll just sound louder. It won't really help in any way or hurt in any way lol. Some newer jazz/fits have more optimized air boxes and you might slightly hurt the fuel economy by adding a ram air filter setup. But it won't damage the car unless your missing vacuum lines or sensors
Not cheaper but just yesterday i found out UnequalFabrication makes a cowl induction, i don't believe t come with any tubing or pipes so you would likely have to fabricate whole part from TB to said cowl induction, ideally include filter somewhere in the equation, but holy heck is it cool. Currently working with 80$ Ebay kit, not installed, will require fab, it has way way too much tubing can't even fit in the car but that was part of why i bought it, just need to confirm emissions and temp sensor fit correctly. Any engine codes with this intake? Thats the big thing im trying to avoid since milage still matters to me.
That opening...VTEC!!!! Ive never seen someone more excited about a 5hp boost
I’ve tried this before on my corolla Ae111 and thats a hot air intake ( open pod ), its fun to drive when your engine is still in normal temp or in the morning but by the time your engine is hot and the weather is too hot you’re losing power caused of the hot air intake. Drop in way better for daily driving, if you dont like the design thn you should go for cold air intake simillar to open pod but the filter need a box that sucks cold air front the snorkel under the bumper..
Hyped for this series for sure, gonna be a sick journey.
just got a jazz myself, huge inspo from you, keep up the content!
What about the air flow meter?
100 times wayyy better!
Cheap DIY is always the best 😍🔥
good job for a budget idea. other than heat you could probably get away with mounting the filter directly without any pipes or get a small straight section.
Id like to do the same thing with my Fit. Would be nice if you added all the measurements for the pipes and breather 😁 nice video!
Is there anything done to the exhaust at all? Or is this stock exhaust?
There’s 2 much air going into the engine so the system is compensating that by adding way more fuel. (doesn’t mean more power ) Which can decrease your hp and fuel efficiency, and can cause the car to bug down . Btw if u haven’t notice it’s a really small engine and a really big filter. Don’t do this crap😔 Also since it’s a hot air intake u will lose power when the engine gets hot 👍
Sucking in warm under bonnet air most often result in lower performance, isn't the original ducted to take in outside air?
Hey just wondering, there is an electrical plug that goes into the stock air box on the top side, if i’m using the open filter, where do the plug goes?
If it’s the IAT plug I’m thinking of, I just drilled a small enough hole on one of the pipes to put the IAT sensor plug into the new system.
I also used the rubber O ring from the stock air box to the new custom system to secure it too
(I placed mine on the rubber silicon near the throttle body)
What size hole did you drill man?
What did you do about you MAF sensor? I’m currently doing the same thing but can’t see yours in the video?
Bro can you give the item list you bought. Planning to install also. Thanks!
Already sounds crazyy wth.. keen for the jazz series!!
100x wayy better! Keen to see where we can take this car with the $5000 budget 😭🔥
hey dude dope DIY kit, could you post the parts list of what you ordered so i can do this myself? thanks
Where did you get that strut bar?
What rubber grommet did you use for the air intake temp sensor? And what size hole saw did you use?
I used the oem rubber grommet from the stock intake box 😅
I forgot what size drill bit I used, but you could probably drill using a small drill bit and work your way up slowly til it just fits the rubber
9:20 to 9:50 was so teasing 😅 good job man . Would like dual camera during driving to show speedo/revs
Is that just the intake? Or do you have anything else on it
Yep just the custom intake only 🙂
Sweet looking hot air intake.
Where can I buy that filter tho
is rthe vtec stock or swapped? (asking for a friend)
does the engine light come on with the sensor not plugged in? Im thinking of doing this exact custom intake :)
Yeah pretty sure without the sensor plugged in it’ll show the engine light.
I think I forgot to show it, but I actually have the sensor plugged in.
I just drilled a hole big enough to plug the sensor in, I drilled it at the back of the silicon hose just before the metal pipe 🙂👍
Ohhh okay thank you!! Sorry one more thing what were the diameters of your pipes?
@@vincesorilla3353 it’s been a while, but I think the silicon hose was 2.5 to 3inch. And the metal piping was 3 inch I think 😅
Not the wood saw on the metal pipe. 😭
Jazz needs to come out for a spirited drive🥵
Yeah keen to take it out for a good drive, but will first need to change up the suspension a little.
Then who knows, nugget nationals? 😅🤷♂️
is this the 1.4l or 1.3l?
1.4
Im planning to do the same thing but i got some friends telling me its not good for engine and its going to cause problems.
So now i want to ask from anyone here how is that possible.
And if it does give problems how can i prevent them.
Tbh not really. It'll just sound louder. It won't really help in any way or hurt in any way lol. Some newer jazz/fits have more optimized air boxes and you might slightly hurt the fuel economy by adding a ram air filter setup. But it won't damage the car unless your missing vacuum lines or sensors
The old hot air intake mod.
Down 5 horsepower at the wheels, up 20 horsepower at the ears.
Not cheaper but just yesterday i found out UnequalFabrication makes a cowl induction, i don't believe t come with any tubing or pipes so you would likely have to fabricate whole part from TB to said cowl induction, ideally include filter somewhere in the equation, but holy heck is it cool.
Currently working with 80$ Ebay kit, not installed, will require fab, it has way way too much tubing can't even fit in the car but that was part of why i bought it, just need to confirm emissions and temp sensor fit correctly.
Any engine codes with this intake? Thats the big thing im trying to avoid since milage still matters to me.
its called the honda fit in my country somehow but i did this mod too and its actually awesome
U R clever 4 sure. Can you mod my Jazz 😉👌
🙌
Seki seki
🔥🔥🔥 100x way better!
Was that a wood saw?😂
pvc pipe would of sounded way better and cheaper.
Not talking crap just curious have you tried pvc in the past, I wonder what kind of sound you would get
losing power,youre sucking in hot engine air. put the stock box back on and use and aftermarket filter....this literally doesnt work just makes noise
Enjoy your VTEC cause IDSI is weak I tell you
Say no to ulez