Bosch Router Table and Router Assembly 1617EVS + RA1141 Setup, Tutorial, and Review
ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2023
- Welcome to our comprehensive guide on the Bosch Router Table and Router Assembly, featuring the powerful 1617EVS Router and the versatile RA1141 Router Table. In this video, we'll take you through the step-by-step process of setting up and using this fantastic combination to tackle all your routing needs. Whether you're a professional woodworker or a DIY enthusiast, this setup will surely elevate your woodworking projects to the next level. Don't miss out on this in-depth tutorial and review of the Bosch Router Table and Router Assembly 1617EVS and RA1141!
- แนวปฏิบัติและการใช้ชีวิต
Just ordered one of these on amazon and figured i'd look for a video. Yours was the only one I found that actually was 1. about the correct model (regardless of what video titles said) and 2. was comprehensive enough to actually understand the situation! Sadly I think this is still a "bare minimum" router table, and all the plastic is concerning, but my needs are pretty simple, and I think it'll work well enough for what I'm needing. Thanks for taking the time to make the full video!
The shims are for the left side of your fence to joint boards.
Thank you, I "assumed" they were there to make some adjustments but I even resorted to the directions and didn't see anything about them in there. Thanks for watching and again thanks for the information.
Thanks!
I have this table for over a year and it's a good one for weekend projects. A nice addition not mentioned is the two legs have storage compartments where can keep most accessories stowed away. I run a 1/2 - inch Hitachi router so it will accept other routers not only the Bosch. It's best to check if can mount yours before buying. Should know the fence and the bolts don't get any easier to setup in the slot holes with time. So far having lived with it for a time is a good one.
Thank you for watching and dropping a comment.
I am putting the same setup watching your video, I am so grateful for your ability to explane things in a way that makes it easy to follow along. MUCH THANKS
Glad it helped you thank you for taking the time to drop a comment.
Great video, thanks for putting this assembly together. I just received the same products from Home Depot today. Was able to put table together today.
Glad it helped, the instructions were pretty crappy that came with the one I got. Thanks for watching and dropping a comment.
Shims are to place against the fence to use the routing table as a small jointer.
Thanks!
About to buy this same setup, thank you for the video!
No problem, I had the "kobalt" version... Had.... lol This setup so much better and easier to use, not to mention more power. Thanks for watching and dropping a comment.
BTW those shims are for spacing out the fence I believe, they slide in between the fence and the rear fence mount.
Thanks finally figured it out, that video is about a year old, leaned a lot since then. lol
I'm thinking of integrating the tabletop to my workbench. Do the legs disattach from the top? And approx how thick is the table top? Thank you!
The top is 1" thick and a few screws you could remove the top from the legs. Could easily fabricate legs, a stand or even make a drop in for a tabletop. Thanks for watching, hope that helps.
I have researched this but can't seem to find the answer. Is the only way to change the bit is from under the table? PLEAES TELL ME IT"S NOT!
No it should have come with a small allen key with a handle on it. in the front left side should be a hole, you unlock the router, insert the key and turn it up and down.
nice review…did you buy the pan head screws for mounting the plate or did they come with router? if not…what size are those screws …m4, m5 etc??
It did come with the screws, had a little pack with a few different sizes in there. Did not check the size, sorry can't help you with that. Luckily I am a bolt hoarder anyhow, so if for some reason it didn't come with them I most likely have them somewhere in a pile. lol Thanks for watching, sorry can't help you on the size.
Are you going to make any how to use videos, we have a lot of the same stuff and I'm a beginner.
Most likely I will, I haven't done it yet since I am basically teaching myself and going to TH-cam University... Lol People are ruthless on here when you do something wrong, they let you know real quick. Are you looking for something in particular?
How about building a workbench with shelves using a table saw, miter saw and router?
Wait you used pan head screws but then the video cut and the pan heads were gone and you were using the flat machine head screws without explanation. I'm guessing the pan heads were too bulky.
Been a few months now since I did the video but yes it should be flat machine screws. Most likely grabbed the wrong ones to start with trying to record and put it together and when I edited it down just cut the part out where I put the correct ones back in. James Cameron I am not... Thanks for watching and pointing that out if someone else needs the info.
Thank you for the video!@@PoppysWoodworking-vb7re Actually it looks like it has to be pan-head screws that came in a bag with the table. If you check the maual on Page 13 on the photo (Fig. 6) they show pan-head screws. Also on Pages 9-10, where they list all the screws, under each pan-head screw they wrote "for Router". Underneath the plate on the MDF they have special grooves for the pan-head screws so they don't get in a way and the plate could sit flat.
Hi and yes, it should be the the pan head screws. I noticed that too and thanks for the video. Did you mahe a follow up video on actual routing?
@@indeedalive
Jointer shims
What the type of router machine?
1617EVS Bosch amzn.to/3ODtrWV
Thanks for watching.
@@PoppysWoodworking-vb7re thank you for your respond. Really appreciated
HI......no lifting mechanism ??? 😢
Budget tools have limitations... lol I don't use it enough to justify spending a ton of money on it. If it was an "everyday" tool I used I would have spent a few hundred more and got a bigger better table. Thanks for dropping a comment sorry took a while to reply.
Thanks a lot My Friend!!! good presentation, because the manual and instructions are not to clare.
Thank you for watching glad it helped.