My unit keeps cutting shutting off randomly and I have to shut off my bike to get it to come back on or tap on the faceplate the wiring is all correct any ideas? This is the second one I've had do this as well.
You should put a multi meter on the power leads and try and duplicate the issue. You want to check to make sure you are not dropping voltage below 11.v (this will cause the receiver to shut off ) It is also possible the contacts under the face panel can be corroded or damaged from use. Remove the face panel and inspect the connections, and all pins for anything that may not look correct. Thanks
The KMR-M318BT is a discontinued model, however, it has a conformal coating on the Cricut board and is not IPX Rated. Please visit www.kenwood.com/usa/car/ for all current receiver options to include our IPX-rated line of marine/motorsports products. Thanks!
My KMR-315BT does not show the Remote App selection available and volume is limited to a Max of 15 when using Bluetooth from my device. Anytime you touch the volume on my phone the stereo defaults to 15
Your KMR-315BT is only compatible with the wired remote, and not with the smartphone remote control app. If you are using an iPhone there was a recent update limiting your BT volume. This can be adjusted in phone settings under settings and search for "Volume Limit" and make sure it is turned off. Thanks!
Andres, can you please clarify what is happening? Are you trying to listen to music from a USB flash drive, but after inserting it into the receiver, it displays NO FILE? Or?
Andres: When downloading the update from our website, please try to download directly to your computer. After the file has downloaded to your computer, drag the file directly to a completely blank USB flash drive. See if this solves the issue.
I had been considering a marine headunit for my convertible as most I see have black digits on a white face for easier visibility. I am disappointed to see this does not.
My unit keeps cutting shutting off randomly and I have to shut off my bike to get it to come back on or tap on the faceplate the wiring is all correct any ideas? This is the second one I've had do this as well.
You should put a multi meter on the power leads and try and duplicate the issue. You want to check to make sure you are not dropping voltage below 11.v (this will cause the receiver to shut off ) It is also possible the contacts under the face panel can be corroded or damaged from use. Remove the face panel and inspect the connections, and all pins for anything that may not look correct. Thanks
What level of water protection/marine environment protection does this unit have?
The KMR-M318BT is a discontinued model, however, it has a conformal coating on the Cricut board and is not IPX Rated. Please visit www.kenwood.com/usa/car/
for all current receiver options to include our IPX-rated line of marine/motorsports products. Thanks!
You need to do an install showing how to connect a scosche HDSWC1 interface to the KMR-M318BT head unit for a Harley Davidson 96-12 install.
Do you know what yhe name of the connectors are.... the removeable faceplate connectors.... 20 pin...
Thats all great, but what if you dont want BT and just hook up you nano to the usb? I have everything wired right but no sound.
U gotta watch where he says select source
What radio is you using
the video features a KMR-M318BT, Thanks!
Do you have a video showing how to install the receiver amp and speakers for 2000 FLHT HARLEY?
No, but will consider the suggestion. Thanks!
For an iPod Nano, the best connection would be to connect it to the AUX input.
My KMR-315BT does not show the Remote App selection available and volume is limited to a Max of 15 when using Bluetooth from my device. Anytime you touch the volume on my phone the stereo defaults to 15
Your KMR-315BT is only compatible with the wired remote, and not with the smartphone remote control app. If you are using an iPhone there was a recent update limiting your BT volume. This can be adjusted in phone settings under settings and search for "Volume Limit" and make sure it is turned off. Thanks!
Need a install video for wired remote. KCA-RC55MR
KCA-RC55MR
How do you save the time? Every time I set it then when I turn my bike off it goes back to the stock time.
If this is happening, it would most likely be that you are not connected to a constant source of power, only switched.
I did what it says and I remain on the screen NO FILE. try to read usb but it is not solved. stereo kmm-bt318 some recovery file?
Andres, can you please clarify what is happening? Are you trying to listen to music from a USB flash drive, but after inserting it into the receiver, it displays NO FILE? Or?
Hello! the problem I had is that when trying to update firmware my kmm-bt318 was not updated I am left in na file, and it does not work.
Andres: When downloading the update from our website, please try to download directly to your computer. After the file has downloaded to your computer, drag the file directly to a completely blank USB flash drive. See if this solves the issue.
Show us how to bring wires if they are missing
Can this units Equalizer be controlled by an IPhone 6+
Yes!
Hello from CZ...Too bad we don't get all the fancy toys you have in the US :)
Can I connect KTS-RC 100MR to this unit?
Lynette, only the KCA-RC55MR and KCA-RC35MR are recommended for this receiver.
Just tried to use remote app with this unit... says my unit is not compatible...
I have a 312... any updates to make it work??
What is the specific model number of your receiver?
@@KenwoodUSA kmr m312bt
@@KenwoodUSA also... when will you make a receiver with a wired remote faceplate...? I could mount the face anywhere...
@@metricOIL The KENWOOD remote app was just introduced in 2017, it is not supported on older models like the KMR-M312BT.
How do you turn it off?????
To turn off the receiver, press and hold the SRC button.
Thanks, I was trying that but I think I needed to let the functions catch up. I was pushing other buttons right before I tried to power off.
Play at .5 speed for a tutorial from Simple Jack
lmao, how bored you gotta be
I had been considering a marine headunit for my convertible as most I see have black digits on a white face for easier visibility. I am disappointed to see this does not.
Hello! the problem I had is that when trying to update firmware my kmm-bt318 was not updated I am left in na file, and it does not work.
Andres - please see response on your other inquiry.