Finally reached 140hp - Suzuki Swift Sport

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ม.ค. 2025

ความคิดเห็น • 18

  • @armchairtuner
    @armchairtuner 3 หลายเดือนก่อน +3

    Next step put some Cat Cams in it, Drop in, no other mods for an extra 10hp 👍

    • @autofokusDanmark
      @autofokusDanmark  3 หลายเดือนก่อน

      Hi There. Really! I actually though about it. Thanks for the tip :)

  • @Lesley9292
    @Lesley9292 5 วันที่ผ่านมา +1

    Hello ! Nice video
    I have a swift from 2008 myself
    I wonder if you really need the Cat converter ?
    what if you dont use it ?
    and if this legal MOT wise ?

    • @autofokusDanmark
      @autofokusDanmark  5 วันที่ผ่านมา

      @@Lesley9292 you don’t, if you moral is okay with it😂.
      You will get an error from time to time on cat efficiency below threshold, but if you can live with that then no problem.
      /Simon

    • @Lesley9292
      @Lesley9292 5 วันที่ผ่านมา +1

      @@autofokusDanmark oh well maybe i wil add the high flow cat converter if its not too expensive ;) and add heatwrapping around it for max performance

    • @autofokusDanmark
      @autofokusDanmark  4 วันที่ผ่านมา +1

      @ good descision. Nevertheless, a de-cat or race cat is mandatory to really increase the power.
      Good luck😀

    • @Lesley9292
      @Lesley9292 4 วันที่ผ่านมา +1

      @@autofokusDanmark I already did a chip tuning, Cold air intake ( Injen) Strut engine and under the car, exhaust
      spacers and lowerd 3cm
      its already a fun little racecar

    • @autofokusDanmark
      @autofokusDanmark  4 วันที่ผ่านมา +1

      @ Sounds like a true racer 😀 Well done👌

  • @joaocandeias
    @joaocandeias 2 หลายเดือนก่อน +1

    Hi! Sounds so nice, thinking of doing the same on mine.
    May I ask what rear muffler you're using?

    • @autofokusDanmark
      @autofokusDanmark  2 หลายเดือนก่อน +1

      Hi. Thanks for writing😇.
      It is a low budget iron sports exhaust, not stainless steel or anything fancy.
      However, only fitting the rear exhaust made no change to the sound, not untill the exhaust header was installed👍😎🎵.
      /Simon

    • @joaocandeias
      @joaocandeias 2 หลายเดือนก่อน +1

      @@autofokusDanmark Thank you for your "Swift" reply 😅
      Is it an Ulter Sport brand muffler? If yes, that's great feedback since i was looking forward to buy one used. Also Iron, not stainless steel version.
      I'm also curious on what you did with the O2 sensors for this new cat, and also how the complete exhaust system works from under the car. I'm assuming that the O2 sensors were deleted and the ECU reprogrammed so it does not acknowledge the cat? Just guessing.
      Thank you and keep up the great work!

    • @autofokusDanmark
      @autofokusDanmark  2 หลายเดือนก่อน +1

      @@joaocandeias yes, that was the one!! Forgot the name😂.
      You can easily just fit the post cat 02-sensor. The ECU barely notices the “wrong” signal. You might get a MIL after 1000 km though.
      So now it is up to your morality, if you want to fit a cat😂.
      Best of luck my friend.

  • @audriulis
    @audriulis 3 หลายเดือนก่อน +1

    I wish I could do the same to mine ssp, would be also great to know where and what cat converter you have fitted, thank you

    • @autofokusDanmark
      @autofokusDanmark  3 หลายเดือนก่อน +1

      Hi. It is an easy job, good luck. The cat is just a standard high flow cat from race cars.

  • @iamnotyourmate
    @iamnotyourmate 3 หลายเดือนก่อน +1

    Would be cool if you sent the links the parts the cat and also the exhaust header

    • @autofokusDanmark
      @autofokusDanmark  3 หลายเดือนก่อน

      Hi. Have a look in the video description. The cat is just a standard high flow cat.

    • @joshkeil8270
      @joshkeil8270 7 วันที่ผ่านมา +1

      How did you re map the ecu as I’m in Australia and no one done them here

    • @autofokusDanmark
      @autofokusDanmark  5 วันที่ผ่านมา

      @ you need software and hardware to do it. I reccomend you get a proff to do it.
      It is remapped thorugh bench mode.