How To Charge Battery At Home
ฝัง
- เผยแพร่เมื่อ 19 ธ.ค. 2020
- Charge Any Battery Of Car And Bike At Home.
Use 12v Charging Adapter Of Wifi Router Or Tv Setup Box.
Or Buy 12v Battery Charger From Links Given Below.
#batterycharger #homemadesolution
Visit The Link Given Below :-
To Buy 12v Adapter:-
amzn.to/3yePBWx
To Buy 12v Battery Charger :-
amzn.to/3GfRJl7
Or
amzn.to/3hA2eWe
Or
amzn.to/3HuOuZb
To Buy Digital Multimeter :-
amzn.to/40Oa9Co
Or
amzn.to/33MRD1Z
Or
amzn.to/3NvZeXF
|----------------------------------------------------------------|
❤️️ "Thanks For Watching" ❤️️
|----------------------------------------------------------------| - ยานยนต์และพาหนะ
you have not mentioned Amp rate required from Charger output and same for Bike/car battery
Minimum Output Of Adapter Must Be 12v - 1A. "Not Phone Charger"
Any Bike Or Car Battery Can Be Charged Using That Adapter.
But Remember It Only Helps To Charge Low Battery.
In Case Of Horn And Self Not Working.
This Method Only Charges Battery About 70%, Rest The Alternator Of Vehicle Do It's Job To Charge The Battery Full.
@@NikhilGurav Thank you Nikhil Gurav 👍👏
Will it work on 12.v , 2A?
Reply fast please
Can we use same color wires,?
@@Pandeyhihu Yes 12v, 2A will work.
You can use same colour wire but the connections must be proper
Love you man!!!!.... It worked well for my car...... It took nearly 1 hr to fully charge
So clear, precise and professional . thanks a lot bro.
Next time, kindly upload bike battery charging problem/magnetic coil problem ?
Thank you so much from Pakistan it worked for me on my suzuki mehran battery as well....i charged it whole night as it was a car battery.
Time is running out bro
Dude, thanks a lot......worked like a charm today...
You are genius it's really work save my money tqq so much ❤️❤️❤️
Life saver doctor..thank you
great videos without explantion and crystal clear
Thank you for your method. I used my 19.5V laptop charger and the effort was successful. Even though there are expensive methods for battery charging in TH-cam, your method is absolutely free. Thank you very much. I subscribed you.
Hello, how long did it take to be full?
@@Biznakali Around 3-4 hours
This technique worked well for my Activa - i.
Thanks for sharing the idea.
I had an adapter with output : 12V-1.5A. No hassles.
For how long did you charged .
I have 4mAh battery ?
How long you charge?
@@Andy-kv2hg over night
The battery did not charge for overnight also.
Finally took to local Mechanic, he said:
Charging coil is fine
RR unit is fine
Wire cables are not cut
But the meter was having short circuit problem
He disconnected those wire and it is charging fine
Good 👍🏼 now am trying this idea 💡
I tried and it worked for my Himalayan battery.. by using dish tv adapter
Thanks bro aleast it revive my fan though have already order new charging module but heat will be managed before the order arrives
thanks bro .
love from Nigeria🇳🇬🇳🇬
Your fab bro.... Before covid wave i used to give the battery in shop & pay 150₹😐😐. Just now fully charged at home as per your guidence. Thank you
Kon se charger se ho jayegi charge
@@harshmehrotra8639 I used my old XPERIA E3 charger
Grabe ang galing..pwedi pala magamit charger s celphone kahit 5 volts lang ang output nya..thanks for sharing this video sir..mabuhay po kayo God bless
I used it successfully. Thank you bro
👍👍👍👍. You make me save my money to buy new charger.
Thank you so much....I was struggling two days with charging after filling battery acid to my motorcycle battery (12v 6.5Amp). Then, today i found this. Then i take my router charger 12v and tried with it. 🌟 Result with a bang...❤ i charged at about 1hour. I dont know fully charged or not but my motorcycle signals, speedometer panel, headlight, horn and self start functions all are working very well...❤
What acid did u use? Snd wahts the cost for acid
@@goodspirit5747 Battery Acid. I dont know the type. But not battery water, it is called battery acid.
@@goodspirit5747 Battery is charging but i dont know battery dont backup the power. When connected to the motorcycle battery start to drain quickly for no reason.
@@flashsellers2204 oh thanks for reply. So it would be better of we can afford new battery ryt?😌
Hi can someone anwser me .When im puting wires on battery its sparks i put first wire on plus then when im puting on minus its throwing sparks is that normal ?
excellent, very neatly explained... Thank you...
Thanks bro 🙏 just charged my 12V battery with my laptop "Asus" Charger using this method.
is the output of your charger 3A,is it still ok to use 3A
Thank you for sharing sir 👍💯💯
thangs for this video it save my money no by any thing in the electronic shop good job bro ...
Best....
Tried and it worked.
Thanks for this video ❤
It's working. Thank you
Brilliant buddy
May God reward you🤲🏻🤲🏻🤲🏻
Thank you very much sir ❤️❤️
Thanks a lot Bhai. Bohut help Kiya aapne 🙏
Thank you bhai. Aap iss issue related confusion ko solve kar diya.
I always gets confused which cable i should connect or disconnect my battery is frequently dying idk the problem yet i have changed the alternator and battery looks like i have to the rectifier also
This is how i always remember which one I should connect first or disconnect first
If bike and battery are couples its negative to separate them and positive to join them..
Thanks for the vdo
❤️👍🏼
Puide pla yon basta 12 v na charger lodi thanks for sharing
100 % working thanks bro❤
Very nice video bro
Very helpful. Thank you
verry nice great video thank you sir
Thanks again for open my brain
Heartly thanks bruh
Keep Supporting 👍🏼
Very very Thankful for this video 📹🙏🙌👏❤
Bro out of many videos, urs is the best. I really thank you
Appreciate Your Comment,
Keep Supporting,
Thanks
Bro I hadn't charged the battery for months, after seeing the video I charged for an hour and didn't work. Should I charge more
@@ashish.a6147 Try different adapter and charge for atleast 2 hours.
Also do connection properly.
Very good information.
Nicely explained.Thank you.
I am gonna try this and if this really works than you are going to save my too much time bro
Thanks for informative video
thanks I have my own charger because of your video..its effective..
Bro I will try this right now...if it works I really thankful to you.. I will told you my response after that..thank you
Is it work
@@Ajay-fw8ch actually my battery was dead ..but I saw some changes after that may be it charge if battery is not dead
@@yashpalsoni4208 👍👍
It's really work
I'll do it. Thanks man
Excellent bro, 👍👍
Excellent idea
Thank you sir this is a great video. I have an AC-DC adaptor/charger output 9V, 150mA 1.35VA can I use this to charge 12V 142A(CCA) battery?
No idea about that, but you can try and see, no issue in it
Very Slow charging....
Thanks. It worked really well for me. Used adaptor of Jio set top box. 4mm cable and it worked like a charm
You understand my experiment, Thanks
Veary good information guru
LOVE YOU BRO💝😘
bro mine was not working at all. i did it tonight using a settop box adapter. And it really works. i charged it for 8 hours/ was it too much? Thank you bro.
No problem but next time charge only 4 hours, it's enough.
@@NikhilGurav thank you bro. until no problem,. its charging my classic 350. great
@@dazzymanni Thank You, Keep Supporting
I see that you're using Amaron dry battery. Will this work on Exide liquid batteries? I mean the ones with liquid and acid?
Yes, but you first need to change battery water, then charge it.
thanks bro👌
Good job bro ❣️
Man I knew its gonna work. But I was a bit confused with the voltage & amp.
So I searched & found your video.
But I will advise to use higher amp & 12V.. Like I used an old 12v 2A from an led light. It charged within 3 hours.
Use something like 12v 1A at least.
Like set top box adapter etc.
Yes, Atleast Use 12v 2A adapter.
Can I use 12V and 1A adaptor
Yes you can also use 12v 1A adapter
Does it heat on charge, I m using 1a charger . No heat
@@remrem6681 It will not heat while charging dry battery
Input 100-240 v - 50/60 0.4A
Output 12V -1 A
Can I charge amaron 12 v bike battery
And how much time it take to get fully charged
3 hours maximum
Thank you
This trick works well 👌. Thank you very much.
Wow bhai kya mast video bna huaa
Bro can i use 12v 3a adapter for a 13.10v battery?
Yes sure
I used 12 v adapter with 3 v output and put it for 60mins...when i tried to start the vehicle ,horn and indicator started to work but the power is not enough to start the vehicle.. I've put it to charge again.. I'll update the result
Edit:- i rode the vehicle for some times, and now it works..
Any results bro? How long did you charge??
@@Andy-kv2hg i was charging it the wrong way...i connected the wires on positive and negative properly later, and it worked...
@@adhils9633 you mean to say + terminal should be connected to Red wire ( + charging wire)?
@@Andy-kv2hg yes...my charger had both wires black..one wire had white stripes...its is positive and the other black is negative...
@@adhils9633 great,
My charger has Red and Green wire.
I believe Red is + terminal, connected to + terminal of battery.
I checked by Tester, so the current is passing to battery
Since 20 minutes it is charging, will check after 1 hour!
Good editing
Brilliant
Will try and let you know..
How much time it takes to charge?? Please tell me 🙏🙏
2 to 3 hours
how much time to fully charge battery?
Depends the volt and amp your charger produce.
Normally charge for 2 hour
#_DIL_KHOOSH_HO_GAYA_BHAI...
Thank u bro
What is the highest volt/amp adapter you can use on a 12 volt battery without damage to any component?
Obviously 12v Adapter
Check the ampere too whether it is 5A or 1A.
bro
my Set top box Adaptor
input 90-270v
50/60Hz 0•7A MAX
Output:12•0V 2A
can i charge the battery of scooty with this adapter
please Bro reply
Yes, Your Adapter Has Output Of 12v, You Can Use It To Charge Scooty's Battery
@@NikhilGurav Bhai Battery m koi dikkt to nahi hogi na
or kitni der m hogi battery full charge
@@AnilThakur-yr6qt No Problem
Yes
Thanks bro
Thanks bro for this wonderful tutorial
How much time it takes to increase voltage from 11.8 to 14
Your battery should never reach 14 volt while being disconnected from the vehicle. 12-13 is perfect
Poli chetta
Can you tell in English ?
@@NikhilGurav he tell that you are super
Malayalam 🔥🔥🔥🥺
@@NEVEREVERGIVEUP478 Ohhk, Thanks ❤️
Thanks
It's really work bhai
Thank you so much 🥰❤️🥰🥰❤️🥰❤️
Love from Nepal
Keep Supporting ❤️
How much time does it take to fully charge the battery?
3 Hours Maximum
Thx buddy
I have set top box adaptor output-12v-1.5A.
Input-90-270v 50/60ha
Can I use?
Yes, This Will Work.
The best method to charge a vehicle battery is to use a UPS... you can get it in a junkyard or from a collecting shop with very cheap price. Remove the battery inside it and connect the battery that need to be charged into it.
Did you mean the Computer UPS which is used as backup?
@@abhiram___ yep
@@maheen- but what about the current used for charging? In how much current (ampere) does the UPS charge the battery?
@@abhiram___ It spit out efficient current to charge a 6 Ah battery. Bikes have 4 Ah battery, they will get charged faster because of low amp. but batteries below 4 Ah can't be recommended. Batteries above 6 Ah takes longer and longer time according to the capacity. you can even fully charge an inverter battery with 100 Ah using this. but takes days.
@@maheen- Thanks bro
Awesomely good news 👍
Awesome tutorial my friend. But what is the reason why we should disconnect the negative first and reconnect the positve first.
If you connect the negative terminal first, the car’s entire frame becomes grounded together with the nuts and bolts on the frame. After you connect the positive terminal and if by mistake spanner touches the frame or any grounded part of it, a short circuit may occur that could cause the battery to explode.
I thought the rubber tires will prevent the grounding to earth?
@@emmanuelchukwu4964 But the stand is metal.
Negative is all connect with body .
@@emmanuelchukwu4964 Here ground doesn't mean literal ground. Its referred to the negative terminal. Which is the whole frame of a vehicle.
What if you don't have red/ black wire ? Does the colour matter ? Or is it just to identify terminals easier ?
It's good if you have same colour wires.
Using different colour wires may confuse you to identify which is Positive and Negative terminals, which will result in explosion or some small damages.
@@NikhilGurav it is just two wires right..i connected red to positive and the blue to negative . i didn't have black wire . Instead i used this blue wire. My battery is being charged now .
How long are you charging??
@@Andy-kv2hg 40 minutes to one hour
best how to video
Good bhai
I studied electrical engineering for 5 years, this video is fake. To charge a battery you must apply a larger voltage than the output voltage of the battery e.g 12v battery would need about 14/15V.
Your Money is waste in engineering.
Sometimes Practical works than Theory
Try this method, see results and then come here to comment and teach 👍🏼
@@NikhilGurav savage Reply bro 😂💯🤣
5 years studied , not 5 years experience 🗿
@@NikhilGuravdestroyed in seconds
@@NikhilGurav o
Bro I have 100-240v 50/60hz
Output 12v
Will it work on dead battery of bike
Yes it will charge if you battery is fully Low. Not The One Which Is Dead / Expired. Old Non Working Dead Battery Needs Replacement, They Cannot Be Reused Or Recharged
Super
Ima try it
My dear friend, in your video, you are charging a 12 Volts battery with a charger having an output of 5.2 volts. Electricity always flows from higher potential (Voltage) to lower potential. Hence, your this method will NEVER work with a charging adapter of lesser voltage than the intended battery voltage. In order to make it work your charging adapter MUST HAVE AN OUTPUT VOLTAGE of more than 12 Volts.
You my dear friend, please go through comment section, many of them had charged their battery using this method.
It's better to try first then comment
My dear friend, you better consult some electrical engineer or an electronic engineer for your this method. If this works you definitely deserve a medal for your INVENTION(?)
@@vijayghugre3293My dear friend, go and teach your high level engineering to someone else, don't waste my time
You Better Get Lost, Before I Block You
@@NikhilGurav epic comeback
Sahi baat hai aapko 12 volts ka charger with higher Amperage chahiye.... 12-0-12 transformer sabse best kaam karega .... baki SMPS aur yeh charger 10 min me jal jayenge ...
Bro INPUT-100-270AC-50/60HZ
OUTPUT-12VOLT-DC 1 Amp
-How much time taken and
-can i use it?
If output is 12v you can use but use more amp adapter
@@NikhilGurav using this adaptor how much time taken
2 hour maximum
2hour for 2ah battery
4 hour for 4ah battery
24 hour for 24ah battery
If 12VDC/1AH supply given😊😊
Hi, I would like to do this! Thanks for the tips! I have a question by the way. Would adapter with an output of 9V 500mA work?
Use 12v adapter only
Awesome
Sir 5 v adapter se 12 volt battery full charge how impossible
Try and see
Brother ,you used 5v charger ,5v charger possible to charge 12v battery ?
I tired that time using 5v set-up box adapter only, it worked no idea how, but you try using 12v adapter for a successful output
Amazing
Good idea.
I tried with 12 v but failed , then used 19 v laptop charger like this 10 minutes successfull
This video is fake
@@ganeshprabhu7440
I was successful with laptop charger
I tried to charge it without disconnecting the battery from motorcycle as the screw was very tight. My wifi adapter's (12V) wire and adapter goes too hot just after connecting with positive terminal before putting the adapter into the socket
😂🤦🏻🤦🏻 Never Do This Bro
That Might Damaged, Your Bike Electric Components.
Always Disconnect Battery Before Charging It.
@@NikhilGurav Ok bro
so you mean the hotness was beacause of not disconnecting the battery right?
@@carromboard Yes Right.
@@NikhilGurav One more question bro
The phase is in the left side hole of the socket (in the electric board) so that means the negative (neutral) will become the innerside of the adapters jack?
@@carromboard That Doesn't Matter, Adapter Can Work In Any Electric Board. No Matter Which Side Phase Is.
Jabardast