How to Install a Transmission Drive Belt on a John Deere Sabre
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- How to install a transmission drive belt on a John Deere Sabre. How to remove the mower deck on a John Deere Sabre. 38" Mower deck. • How to Remove the.Mowe... .
John Deere Sabre 14.5 horse power 38” mower deck.
Having just purchased an old John Deere Sabre, I found your videos are very well done and informative. It's heartening to see that you haven't let your disability slow you down. Great video!
Hi Michael, I’m glad my videos have been helpful. Thank you for watching and the kind comment!
Thanks for a highly detailed and informative video. These Saber lawn mowers are actually pretty nice. I have the owner's manual, but it only outlines how to change the deck belt. Watching this video made the drive belt change a breeze. Great job.
I'm glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated! Thank you for watching.
I have a Sabre 1538 Gear ( not hydrostatic, but the 5 speed). I took my deck off to change blades & clean it good & noticed my drive belt was cracked & running on the outer skin with 1/2 & 1 inch chunks missing. I am glad I didn't just cut it off to make removal easier because i never would have known about taking off the steering linkage. I actually thought I did something wrong at first. The belt size is 105.7 inches. The only thing I could find locally was 105.75,that .05 was enough to cause it to slip. You can loosen the pulley closest to the transmission & move it back to add a little more tension. It's a trial & error thing as I first moved it a small 1/4 inch & she jumped when I released the clutch, so I moved it forward slightly & as good as new. Also at around your 10:37 mark my belt goes on the outside of that shaft, closer to the switch to ride straight.
I’m a pretty handy guy, but I got a Telya. Your video was unbelievable the way you explain things the way you had video footage. I have never done this procedure before and it was exactly how you said it. Thank you so much for posting it. I will definitely tune in the next time I have any other issues with my mower.
I’m glad it was helpful and all worked out good! Thank you for watching and the kind comment. Please give this video a like, subscribe and share my channel with your friends to help it grow. It would be greatly appreciated!
I’ve owned my saber for two years. I’m the type that doesn’t like to do something without clear instructions. My mower DESPERATELY needed belts even when I bought it. But they’ve held on for two years. I can finally replace all the belts you’re a life saver
Hi Howard, I'm glad this video was helpful! thank you for the kind comment, and for subscribing. It is greatly appreciated.
This is the single most helpful youtube video in the history of youtube videos! Right down to the tools! Wonderful job- thank you. My belt finally died after 22 years... YES! 22 years! (Weekly mowing plus light snowplowing!) Two quick follow-up tips to offer: 1. I didn't have a small chisel like you did, so I used an extended screwdriver drill bit to wedge against that pulley. 2. This one is probably big- how to relieve the pressure on that spring loaded pulley if your belt breaks and you don't have the old one to work with. This was my situation. What I did was route the NEW belt in place, but I looped it around the shaft ONLY on the front pulley (not the pulley itself). Like you explained, the new belt is tighter- doing this gave me enough leverage that I could yank pull that spring-loaded pulley (as you show in the video) far enough to wedge something in. I then proceeded along with your video. Thanks again!
I'm glad all went good and glad you were able to figure it out. Thanks for sharing and the kind comment.
Followed your instructions, worked like a champ. The mower is 26 years old, now runs like a top! Thanks for a well-done video!!!
Thanks Calvin, I’m glad all went good. Please give this video a like and tell your friends about my channel to help it grow. It would be greatly appreciated. Thank you for watching:)
I did this 3x before and after watching this, it made it the easiest simplest change over, Thanks.
I'm glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
WOW! And there is people the have both hands and can’t do shit and complain about everything all the time!
You are an inspiration!! Keep the videos coming!! I make sure I share them!
Great video and I have a Scott’s s1642 and basically the same undercarriage and routing of drive belt. You can actually route the belt around ( up and over ) the main pulley by looping it up and over without having to take the pulley off / for those without torque / air driven wrench’s and save one step. 👍
By far this is the best video I have seen on utube and not just the video , but he explains in detail , he doesn’t just skim over things . I was having trouble getting the parking brake back together , he even tells you it most likely will fall out of its placement, which it does and shows you what hole it goes into , such clear instructions, Thankyou your the best .
Thanks Rick, I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching
Thank you for your support and helping me fix my old JD tractor it was so helpful to fix my machine. Not to many of this Sabre models left. Even the owner manual did help me. But you saved me some money and time since the lawn shop have a four to five weeks lead time.
I'm glad it was helpful. I agree, I only service a few of the Sabre's now so I try and get the important videos when I can. I know they will come in handy for people like you that still own them. Thank you for sharing and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
Question do you have a video of engine swap replacing my 17 hp with a new briggs & Stratton engine, which is now 19 hp. My dilemma is the wiring is different from the old engine. I think they put a new electrical capacitor or a diode can provide you photos. Maybe you might have helpful hints how to do that I don’t want to blow the electronics, please advise and I’ll look at your station. If you have any cool tips, I can provide you a photo of what I’m talking about.
This was an incredibly educational how-to video for us Sabre mower owners. Exceptionally well done!
For your next video, can you do something on how we can convince our wives on the need for an engine hoist?
LOL, I’m glad it was helpful, thank you for watching and commenting!
Thank you again, Brad for sharing these very instructive videos. Especially this model as a lot of use still enjoy our older JD mowers. Your spirit is enlightening and an inspiration to all. 👍
I’m glad they are helpful and thank you for the kind words! Take care.
That was very helpful. I love how you explain every little detail. Only thing is, you had not videoed taking that rod off that holds the belt in place on that one pulley, and you did not reconnect it when you finished. I hope you remembered it before you dropped the mower and started using it. You are an awesome mechanic and very inspiring. True example of my favorite scripture. Philippians 4:13 - I can do all things through Christ who strengthens me. Thank you for sharing this video to taking the guess work out for others having to do this project, I will be doing this as soon as my parts come in. I will be changing both drive and deck belts as well as blades. Mine is a 46" cut so I am sure it may be a little different but I hope not too much.
God bless you.
Great video. I just got a used Sabre and it needs new belts. Thanks for this.
I’m glad it was helpful. Thank you for the kind words.
I appreciate you making this video. I came upon the yard find and beginning to bring it back to life. I wish I would have seen your video on the deck removal because I had removed a few to many parts. So now I have to add those back to my deck prior to reinstalling. I have the same engine size as your video, so I am going to grab the same part #
Hi Paul, I'm glad it was helpful and thank you for supporting my channel!
Hey man. I appreciate your video alot. Helped me out tons. My belt broke. so at this point I have it broken down, ready to go and waiting on the belt to arrive, and hopeing it's the right size. But, again. I want to thank you for your time that you took to make this video.
I’m glad it was helpful.
Solid video cheers mate! Definitely saved me the headache!
I'm glad it was helpful and thank you for the kind comment. Please give this video a like to help the channel. It would be greatly appreciated!
Thank you! Deck is off waiting for new belt.Video very well done!
Thanks :) I’m glad It was helpful.
i think you can slide the new black pulley back to tension the belt tighter
Holy crap ,,lol Great video ,just have to find the correct belt
Great informative video. What is the part number for that belt
Well done, love the fact ur into it no problem!!!
I’m glad it was helpful and thank you for the kind comment!
Great job, that hoist sure makes a difference! 👍👍
Thank you, I have been using the chain hoist for over twenty years and it is one tool I use almost every day. Thank you for watching!
I never would have thought to use that. I’m going to go buy one at harbor freight right now!
Thank you So very much for this vid. It saved my life!! Thanks Again!!
I’m glad it was helpful and thank you for the kind comment! Please give this video I like and share my channel with your friends to help it grow. It would be greatly appreciated!
You do a grate job with the vids. That’s a pretty busy job filming an working at the same time with three hands. Lol!. I also was born with a birth defect on my left hand ( I was born in 1956) Dr managed to save my thumb,a short pointer finger ,and a little finger. There’s not much that I can’t do, except flip someone off with my left hand. I’m fixing up my old L120 so I can sell it, I bought a new S220 . I hope it lasts as long as my old L120. 17 years old and never had the drive belt changed . 650 hrs on it.
Hi Thomas, glad to hear you are like me and there is not much we can't do! Watch this video if you haven't changed the belt yet. It may be a little closer to your model. th-cam.com/video/lk43fFHin3I/w-d-xo.html. I do like the new S220 and I think they went to a ball bearing in the front wheels. If you can confirm that since you own it let me know.
Very descriptive, thanks mate...
I'm glad it was helpful! Thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
Need to ask a question? Purchased a spare engine for my tractor which is a 17 hp briggs & Stratton engine. And planning to install a 19 hp Briggs Stratton engine. The issue I have is the wiring set up. The new engine has a electronic module but the old engine doesn’t. I don’t know how to wire it. Could you offer some advice?
Man, you are awesome! This helped me so much and saved me a lot of time and frustration.
I’m glad it was helpful and thank you for the kind comment.
I have a 15.5/38 is that the same belt?
My old belt is shredded but you can see where it broke when I measured it it was 94 7/8 but who knows what it really was and every time I look up drive belt they can’t stop mentioning the word deck
Call a John Deere dealership and give them the model number off of the plate/sticker on the machine(they need that number). Tell them your looking for the Transmission belt. You should be good after that! I would also recommend using the John Deere belt and check all pulleys, replace if necessary. You do not want to do that job twice.
Love this video I just recently became one hand less I feel so useless but I just did mine thank you so much you’re an inspiration
Thank you. and for the kind words.Sorry to hear about your hand issue. I was born that way so I do not know anything else which makes it easier for me than having something happen during life.
@@JohnsonsSmallEngines I’m only 44 lost my hand this winter I tree got me but the thing is I need to cut my lawn blew belt last fall so been sitting there I was going to pay someone to cut my lawn same mower so you’re the first video that piped up weird but man you inspired me to try and I did it and I thank you for that and the video
What really blows peoples minds is as a young kid, I loved riding motocross bikes. Keep:on trying new things and I always tell my self that I can do it and somehow with a lot of Patients it get it done.
I think I messed up my e140 today. A couple of months ago I accidentally rest my foot on the emergency brake and with my other foot on the drive pedal. Then belt started smoking, because I pressed further on the drive because I thought I was stuck on something. Then I realized what I did a little to late. The belt seemed fine, it wore it down a little, but i didn't think it would hurt it. Now today I think the clutch went out, because the belt might have been to loose from the wear. It started smoking like heck, and wouldn't go forward or reverse. Ugh! I'm 48yrs old, but I've never had a hydrostatic mower, or a riding more of my own until now. Every mower I've ever even driven or used was well over 30 and 40 years old. Grandpa's Cub Cadet was a 1970 model, and it ran like a top. Just had to rebuild the Kohler motor, and that was it. Any suggestions? Do you think the clutch or Hydrostatic transmission is out? Sorry for the long story, it just really has me heated that this happened.
It sounds like you will need to replace your drive belt and make sure you check all of your Idler pulleys also. Here is the link on how to install a new transmission drive belt for a D140 which may be very close to the E140. th-cam.com/video/lk43fFHin3I/w-d-xo.html
@@JohnsonsSmallEngines God Bless ya for answering my question. I'll make sure that I check that out. Thank you so much, and take care.
How do you set the tension for this belt. I got a new belt put on,.,used it once and now tension is loose and belt is floppy....rider won't move hardly at all....help
It sounds like something must have happened under there. The video shows how it is tensioned. It is only spring tension. If it worked once it was ok then. You need to look and see what has happened.
I just received a 1438 Sabre and put a new carb on to get it running. Won’t go up a hill in 5th gear but in lower gears it will. If there is no tension adjustment (only spring) I would assume it’s time for a new belt?
I would try the belt first. Also check to make sure the transmission pulley isn’t in need of replacement. They get loose up and down motion.
A very good instructional video again, very helpful. Thanks.
I’m glad it was helpful and thank you for watching. I have installed many transmission belts on tractors and it seems they all have some kind of issues but this one went very well and it was a good video to share! Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)
My 5 speed saber does not move. It sounds like the transmission is grinding trying to move. I was wondering if you know where I could buy a new transmission for it.
If you hear grinding, you most likely have a bad pulley on top of the transmission. Check out this video, it may help. th-cam.com/video/gVUXQyHKVtM/w-d-xo.html.
what about a manual 5 + rev just went won't engage shifter does nothing. stuck in the woods help.
Sabre 14.5 38 u got me out of other jams so thanks!
Sounds like shifter came off of transmission mounting point?
@@JohnsonsSmallEngines thanks i'll let you know tomorrow. much appreciated
@@JohnsonsSmallEngines Brad , i located the belt has come off , in park on blocks. any advice before i enter the school of hard knocks. peace.
@@im-already-tired-tomorrow take mower deck off and follow the video and you should be ok.
@@JohnsonsSmallEngines on the gear shift 14.5/38 i found the pulley below the seat , and the belt thrown. i found locking the brake releases tension and this time not so hard of a fix. thanks much , for ur attention , very helpful and generous. peace , and still subbed.
Thanks a lot man. This is a life saver tutorial.
Glad it helped :)
i was looking into a sabre 18hp on the weekend. It engages the deck belt when the deck is high.... when i lower the deck to notch 2 for cutting it basically dies off. As well, when i pull the electric pto, i do not hear that crisp sound similar to that of my dads john deere lx 178. I assume a worn belt.... but not sure
Yes, it does sounds like a worn/stretched belt.
@@JohnsonsSmallEngines thats what it was, i was trying to search and see if there was an idler or support missing. After watching some videos.... its straight from pully to pully
Most gen Xers couldn't do this with 10 hands. So good on you.
What size belt did you use? I couldn't find on the internet what the correct size was.
I go by correct part #'s not sizes. The part # is at 1:02 into the video. You may be able to to the John Deere web site for specifications. Here is the John Deere link. partscatalog.deere.com/jdrc/
@@JohnsonsSmallEngines thank you for the response! I was able to do what said last night and got it all figured out. Thanks for the detailed video!
nice job Johnson very helpful
Hi Keith, I'm glad you liked. Thank you for watching :)
Can you make a video on D140 Transmission Control Lever Replacement cause mine broke and I don’t know how to remove the pin to put new one on . The part that. I’m replacing is for a John Deere d140 part number M810140. Please I enjoy your videos your very detailed and you explain stuff perfectly please. Make a video cause I can’t find one anywhere on net
Hi Jennifer, I would but I need one to come into the shop. Everything I work on are customers machines and go back so I do not have much time with them to take videos.
The pin will need to hammered out with a punch, The control lever will come off then replace the old pin with a new pin.
@@JohnsonsSmallEngines ok thanks
Does anyone have an idea of what part can replace a broken tensioner pulley on the sabre 1438gs.
I got the mower second hand and have not seen the actual part to use as a reference. I found a few aftermarket parts but they say does not fit deck. That does sound ideal and I have no idea how to make that work as it's a part attached to the deck. Any help would be greatly appreciated. I can send a picture of serial and model tag for reference if needed.
Try the John Deere web site to look up your part. partscatalog.deere.com/jdrc/. OR call a John Deere dealer and talk with the parts department.
@@JohnsonsSmallEngines sadly its not on the site. I will have to contact a dealer or fix it shop. Thank you for the response.
Thanks for the great video!
Hi Joe, I'm glad it was helpful and hope your job went well. Thank you for watching and commenting, Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated!
What size belt did you put on?
The part # for this exact model, hydrostatic drive transmission is a John Deere GX10851. You need to make sure the belt you get is for the model tractor you have.
Awesome videos thank you so much
I’m glad it was helpful, Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:) Thank you for watching.
Is it the same belt for the sabre 1538 model (15.5/38H)
I do believe it is the same belt. You can look it up in the John Deere parts look up web site or call a John Deere dealer to confirm before you purchase the belt.
Unbelievably helpful. You're a life saver!
I'm glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!