You did miss one thing. at 10:37 you point to a screw hole in the red plastic tab. Mine had a small black phillips head screw in there. In my case this red tab had broken off and that was the reason for the repair. Just wanted to throw that out there for other people, not criticizing. Thanks for taking the time to make this video, it saved me a LOT of time.
This might have been done a year ago but it is awesome new part is on its way to replace that part and now I'm not stressing whatsoever because you made it so I'll be able to do this and not stress about it and one less little thing for me to stress about turn it down and putting a new part and I appreciate you.... and I appreciate your " Time " and a awesome video...... Thank you so much Matt U.S. Marine Veteran
Thank you thank you thank you!! I was a little intimidated by this repair but your video was perfect and I am happy to have my vacuum back for so much less than had I taken it in for repair. Very very grateful to you for sharing your time and knowledge!!
Thanks so much for the detailed vid, ordered my parts 6 months ago finally came in and forgot how to put it all back together. Thanks again for the help.
Thank you very much for posting this video. It completely helped me every step of the process. I only needed to replace the yoke on my DC41, but this video was still a perfect help! You both show and describe what you did. Thank you for taking the time to record and post this.
Thank *YOU* for doing this vid. We live out in the sticks of Ontari-ari-ari-o and the nearest Dyson repair guy is two hours away. I was able to replace the hose in about two hours (albeit rewinding the video umpteen times ;-)! I ended up playing it at half speed which helped a lot. XLNT * * * * *
Thank you very much for watching and taking the time to leave a feedback! Really appreciate it! Glad to hear the video helped! Awesome job… doing it. Take a moment to pay your back too. Thanks
Thank you cbatilo, your video really helps. Your video in disassembling the parts was what I needed to fix my vacuum. After removing all the pet fur and hair. The brush was still not spinning, I needed to know how to get to the two pong and was able to tighten them for a tight contact. Work out great!
Loved the video. Worked perfectly. I do believe you referred to two screws as T8s and it confused me because they were T10s like the rest. Small potatoes. Awesome video!
Wifey friendly!! I replaced this hose on my 9 y/o Dyson w/o my husband's help...so I could brag I'm beautiful with brains. The original suction is back and I'm motivated to vacuum all day. Thanks for savin' me money and from buying a new Dyson.
Oh my goodness thanks so SO much! Your clear, concise instructions and clear filming allowed me to do this by myself and save a $60 - $65 repair bill. My old Dyson is better than new. I flipped through a lot of videos what were not going to be helpful for me and I was about to give up when I found yours. Many thanks, many thanks.
Thank you. Your video is very detailed that it's almost impossible to make a mistake disassembling and assembling. This is the video i have being looking for. Thanks again. I'm already subscribed
Great video applies to the DC55 did mine first time both hose's only issue ,I had was the reassemble of the part where it connects to the brush assembly , was not aligned correctly not shown in video it slides up and down in a groove , you can't get the case to fit together, with that last screw!!
It started out as a deep cleaning of my Dyson. But while trying to clean internal hose, the red tab snapped off. Figured I'd have to buy a new vac or pay big bucks for a repair call. And then I found your video! Thanks for the detailed instructions that even this 67 yr old grandma could follow. (And thanks for telling what size star bit you were using - very helpful!) Now it's like I have a brand new vac with great suction. Thank you, thank you, thank you!
Great video, which helped me, only problem I had was the the change over hose did not function correctly because I hadn’t got my plastic gear in the correct position which restricted movement but once aligned correctly all was great 👍 thank you
Fantastic video, very close to my DC50 had a little problem with timing cog. This is the only video I have found with reference to it. Great statement (leave it loose). Big shot out, Thank You!
Replaced the internal hose. Vacuum is working so much better except now the attachment hose has no suction at all. Usually there is some suction out of the top of the handle hose when vacuuming. There is nothing at all. Seems like there’s a switch or something that I’ve missed. Any tips or tricks?
Help Please - when I put the two screws on the left side by the white three screw assembly, it prevents the unit from being able to stand upright. What do you think I am doing wrong? Thanks!
11:19 could you please tell me what size screw this is? I need to get one ASAP because I don't want to run my beautiful Dyson without being fully assembled and I've apparently lost the literal last step to reassemble this... 😢
Thank you so much for this! We almost had to spend $400 getting a new vacuum and because of you were able to fix our Dyson! Thanks a ton!
Thank goodness for your video! I swear you're the only one to actually show how the gear aligns. You saved my sanity. For real!
Thank you for explaining the gear, I didn’t realize there was a line up mark and was stuck!! 😂
Thanks for such a detailed video. I went ahead and bought the animal ball 3 to replace my 2. But I am gonna fix this and have it as a backup.
Thanks for the detailed instructions. I wouldn't have known how to replace the internal hose assembly without this video
You did miss one thing. at 10:37 you point to a screw hole in the red plastic tab. Mine had a small black phillips head screw in there. In my case this red tab had broken off and that was the reason for the repair. Just wanted to throw that out there for other people, not criticizing. Thanks for taking the time to make this video, it saved me a LOT of time.
Same for me. Save the screw because the replacement part doesn’t include one. Awesome video BTW.
Great video. Saved me a ton of money because I could watch this and fix it for 20 bucks!
Glad it helped! Thank you very much for taking the time to leave a feedback. Really appreciate it
Appreciate you doing this. My Dyson is now like new again !
Great step by step tutorial. I think I could’ve gotten to the part but I don’t think I could’ve put it back together without the help.
Thanks so much for this video! I was able to repair a vacuum I got for free and make it work much better.
This might have been done a year ago but it is awesome new part is on its way to replace that part and now I'm not stressing whatsoever because you made it so I'll be able to do this and not stress about it and one less little thing for me to stress about turn it down and putting a new part and I appreciate you.... and I appreciate your " Time " and a awesome video......
Thank you so much
Matt
U.S. Marine Veteran
First… thank you very much for your service! Anyway, thank you for watching and taking the time to leave the positive feedback! Really appreciate it!
Thank you thank you thank you!! I was a little intimidated by this repair but your video was perfect and I am happy to have my vacuum back for so much less than had I taken it in for repair. Very very grateful to you for sharing your time and knowledge!!
Glad it helped! Thank you very much for watching and for the feedback
Thanks so much for the detailed vid, ordered my parts 6 months ago finally came in and forgot how to put it all back together. Thanks again for the help.
6 months to get parts. Amazon had it to me in 2 days
Thank you sir. This video was very helpful
Can't believe you didn't replace that "nasty" HEPA filter. LOL
You still did a good job with the internal hose replacement demonstration. 👍
Best detailed video. It was extremely helpful and saved me a lot of money. Thanks. I'm subscribed
Excellent video gave me the courage to replace my hose. I usually have a problem but this video makes it look easy,
This was super helpful. I started on my own and got stuck with the little white gear thing. Then I found your video. Great job with this. Thank you
Great to hear! Thank you for watching and feedback
Thank you very much for posting this video. It completely helped me every step of the process. I only needed to replace the yoke on my DC41, but this video was still a perfect help! You both show and describe what you did. Thank you for taking the time to record and post this.
Thank *YOU* for doing this vid. We live out in the sticks of Ontari-ari-ari-o and the nearest Dyson repair guy is two hours away. I was able to replace the hose in about two hours (albeit rewinding the video umpteen times ;-)! I ended up playing it at half speed which helped a lot. XLNT * * * * *
Thank you! Replaced the internal hose thanks to your video!
Thank you very much for watching and taking the time to leave a feedback! Really appreciate it! Glad to hear the video helped! Awesome job… doing it. Take a moment to pay your back too. Thanks
Thank you cbatilo, your video really helps. Your video in disassembling the parts was what I needed to fix my vacuum. After removing all the pet fur and hair. The brush was still not spinning, I needed to know how to get to the two pong and was able to tighten them for a tight contact. Work out great!
Loved the video. Worked perfectly. I do believe you referred to two screws as T8s and it confused me because they were T10s like the rest. Small potatoes. Awesome video!
I will be attempting to do this on Saturday! Thank you for the tutorial!
Replaced this today with the help of your video. Thanks for posting!
Thank you very knowledgeable , Excellent had to replace inner hose assy and this video really helped .
Wifey friendly!! I replaced this hose on my 9 y/o Dyson w/o my husband's help...so I could brag I'm beautiful with brains. The original suction is back and I'm motivated to vacuum all day. Thanks for savin' me money and from buying a new Dyson.
Thank you very much for watching! I really appreciate you letting us know that the video helped you fix your Dyson. Thank you
What a huge pain in the ass just for a simple part. Glad they changed this procedure on later models
or they could have used metal or something other than cheap plastic considering it was an $800 vacuum.
Oh my goodness thanks so SO much! Your clear, concise instructions and clear filming allowed me to do this by myself and save a $60 - $65 repair bill. My old Dyson is better than new. I flipped through a lot of videos what were not going to be helpful for me and I was about to give up when I found yours. Many thanks, many thanks.
Thank you. Your video is very detailed that it's almost impossible to make a mistake disassembling and assembling. This is the video i have being looking for. Thanks again. I'm already subscribed
Nice video, helped fix our vacuum and save $$.
EXCELLENT JOB! THANK YOU
Awesome video. Got my Dyson all fixed up!
Brilliant! Thank you
You're very welcome! Thank you - happy to hear the video helped
Great video applies to the DC55 did mine first time both hose's only issue ,I had was the reassemble of the part where it connects to the brush assembly , was not aligned correctly not shown in video it slides up and down in a groove , you can't get the case to fit together, with that last screw!!
Now I want all the Sharks!
It started out as a deep cleaning of my Dyson. But while trying to clean internal hose, the red tab snapped off. Figured I'd have to buy a new vac or pay big bucks for a repair call. And then I found your video! Thanks for the detailed instructions that even this 67 yr old grandma could follow. (And thanks for telling what size star bit you were using - very helpful!) Now it's like I have a brand new vac with great suction. Thank you, thank you, thank you!
Thank you very much for leaving this great review of the video! So happy that it helped you! Thank your for watching and wish you an awesome night!
Great video, which helped me, only problem I had was the the change over hose did not function correctly because I hadn’t got my plastic gear in the correct position which restricted movement but once aligned correctly all was great 👍 thank you
Thank you🤘
Fantastic video, very close to my DC50 had a little problem with timing cog. This is the only video I have found with reference to it. Great statement (leave it loose).
Big shot out, Thank You!
Thanks! Easy to follow.
Glad it was helpful! Thank you very much for the feedback
Exactly what I needed to see!! Thanks!!
Thanks! Video helped a lot for my hose replacement?
Thank you!
thank you for this video! got me through replacing both this and the other internal hose as well! hurray for diy😊😊
Thank you very much for the feedback! I really appreciate it. Thank you
Thank you for this! Really appreciate it!
Thank you very much for appreciating the video and detailed work on it.
That was easy to put a new pardon already done it
you forgot the T8 screw other than that thank you!
Replaced the internal hose. Vacuum is working so much better except now the attachment hose has no suction at all. Usually there is some suction out of the top of the handle hose when vacuuming. There is nothing at all. Seems like there’s a switch or something that I’ve missed. Any tips or tricks?
Help Please - when I put the two screws on the left side by the white three screw assembly, it prevents the unit from being able to stand upright. What do you think I am doing wrong? Thanks!
After undoing the 5 screws that part you pulled off wony come off on mine.
Thanks for the video. Do you know where I can get the seal for the part you hold in your hand at 9:12 ? I have a Dyson UP13 model.
👍🏻👍🏻
gah I think I lost my two washers are they more or less standard off the shelf?
The yellow one was the best my house burned and I got the purple I hate it
I could hit the buy it now button in 1/10 the time.
11:19 could you please tell me what size screw this is? I need to get one ASAP because I don't want to run my beautiful Dyson without being fully assembled and I've apparently lost the literal last step to reassemble this... 😢
You didn’t address those small clear hoses in the bottom that break and are EXTREMELY hard to replace
Man, that thing is like the dumbest design ever way overly complex. for a vacuum cleaner. why does it need that big stupid ball for anyways?