This video just saved me. Pick up coil was reading 0 ohms and I switched it out with one from a bear tracker and it read 212 ohms and got spark! Thanks
This video is an overview on how to test the Warrior ATV stators. Different years have different color wires and different trigger and source coil values. For your exact specifications, please refer to your service manual.
@@RicksElectrics Super thanks, ll install a new stator to see if CDI is ok. One more question: l put some "engine restore" in oil before top end rebuild, if it shorts out or affects the source and trigger coils insul?
I have an 87 Warrior with no spark. I have replaced the coil, stator assembly and CDI box, and the ignition switch. It cranks but has no spark. I've verified the neutral, engine cutoff and reverse switches all work. Where should I go from here?
This video just saved me. Pick up coil was reading 0 ohms and I switched it out with one from a bear tracker and it read 212 ohms and got spark! Thanks
Saying pick up reading is all over the place is of no value how about telling spec?
This video is an overview on how to test the Warrior ATV stators. Different years have different color wires and different trigger and source coil values. For your exact specifications, please refer to your service manual.
Was the stator in the video good or bad?????
Hey, great question, what if you dont have a service manual? I need specs, and cant find em no where!
Thanks Rick. My 96 warrior 350 pick up : 250 and pulse: 180, are they in specs or out? It has very weak spark. Broke down 2 days ago.
Those readings are out of spec. A 1996 YFM350 Warrior should read 270-330 ohms on the source coil and 459-561 on the trigger.
@@RicksElectrics Super thanks, ll install a new stator to see if CDI is ok. One more question: l put some "engine restore" in oil before top end rebuild, if it shorts out or affects the source and trigger coils insul?
I have an 87 Warrior with no spark. I have replaced the coil, stator assembly and CDI box, and the ignition switch. It cranks but has no spark. I've verified the neutral, engine cutoff and reverse switches all work. Where should I go from here?
You've covered all of the areas I would tell you to check. Follow the "no spark flow chart" in your service manual.
I would say to check the wires/harnesses. But curious if you ever got er figured out? Thanks!
Ground
No specs ?! How T-F is you're video suppose to do any good to anyone exactly ?
Pretty sure that info is in your service manual (specific OHMs readings). If you have a specific question I can try to help you out.
Poorly video