1000$ paint job DIY AT HOME
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Air compressor 130
Paint gun 189 (mark1 eco my brand)
Paint : speedokote base coat kit 199
Glamour clear speedokote 119
Sander and sand paper 120
Body filler and primer 120
Masking materials 120
BALLPARK NUMBERS DEPENDING ON WHAT BRANDS YOU BUY AND WHERE YOU SHOP
we do work for the public, estimates cost 20$ via cash app, and pictures by email
Cash2kcars@gmail.com
I’m spraying flip cars for some local people in my area. With the old harbor freight 29 gallon air compressor. It keeps up with my LPH400. A year ago I tried the 1150 and that’s all I’ve been spraying since. Glass right off the gun. Keep up the great videos!
I'm going to give this a try
Not wrong. The smr1150 is top dog clear for under 80 bucks a kit.
I use the same compressor 💯
@@2koolforyou88 it's good for panel work
You always put the key board commandos to shame! Keep it up my brother.
I do stuff wrong on purpose just so they cry and scream in mommy's basement
Glamour coat clear coat is my favorite clear coat. I always seem to get a good shine out of it and its not expensive compared to other clears on the market
For 120 bucks and I can spray a whole car 2-3 coats??!! IT'S THE BEST. Most glamor clears out there are way more expensive
See you liked the electric sander. They work well. Air ones use to much air.
To much wear and tear on equipment using air ones.
Electric sander - 40 bucks and cordless
Air sander that blows up my compressor as well from to much heat total cost - 1000$+ and not cordless
Great video ! Us backyard guys struggle and get god results with what we have ! This is great for the newbies
Absolutely!
Looks like a great job! I guess I can do it with my Home Depot 30 gal compressor. Just need a good water separator for it.
Try a toilet roll filter. Cheap and easy to service and works great.
Oh yea 30 gallon easily doable
Marko, that paint came out nice! I was looking to buy a big compressor but found a new 60gal Kobalt in my Cuz' garage... never used or even plugged in :) Now its in my garage and my first paint job will be on my ole 04' Crown Vick! Gotta get it done by the end of March. before the Cottonwood trees let loose!
Spray that thing NOW lol cold is best
@@speedokoterefinishnetwork4937 yea he better spray it. Thanks for mentioning that too. I been thinking wait till warmer but I didn't think about cold allowing the paint to flatten out and flow better. I know it'll flash off too quick in summer than tiger stripe city or look like a pile of sand especially with metallics 😂 my marquis can wait lmao but my 89 civic sedan needs it's nice oem metallic blue back. B37M-3
Thats a boat lol. But not a bad ride. I daily a 05 marquis and my roof is getting pretty bad.
I’ve watched a lot of your videos and ironically this is the slickest and cleanest paint jobs I’ve seen on your channel.
It definitely came out clean for a budget job
How much would you charge for something like that? I’m an autobody guy and I want to start doing side jobs but I have no idea how to price them.
@@joshuawormington2880 macco charges 1200 for there cheapest paint job now. So nothing less than that
Great video. Going to do my old corolla soon. Good tip to spray in the colder weather. Thanks. Hopefully my 30 gallon compressor should have no troubles keeping up. 6.5hp petrol with 18cfm of air.
Oh that's to easy
Cost me 3k.but 2500 of it was mistake corrections😂😂
You inspire us brother thanks for the work👏💪
Absolutely!!!
❤ Aother best, Hay Marko, I don't know if other subscribers have this, but I have to subscribe, ever video u put out?? I've heard other utubers have this happen too, just letting u know, n yes I hit like 👍 n subscribe ever video 📹, Jason B, KS.
Weird stuff has been happening with TH-cam lately
QUICK QUESTION FOR YOU PLEASE
I recently shot my entire vehicle with "speedokote R-Rex bedliner" out of a 2.0 tip HVLP gun. It has dried with very little fine texture just how i wanted it. Since it has dried NOT glossy , I intend to use scotch pad to scuff it 1st than mist the exterior coating with speedokote brand " bite coat adhesion promotor" prior to shooting the clear to assure the clear sticks well. Can u please advise whats the least expensive speedokote gloss clear avialable for me to order that would work over this coating? They have too many types of clear , and i just dont know which one. The vehicle is not kept outside very much at all.
THANKS FOR ALL YOU VIDEOS
Smr 135 is pretty cheap and holds up well
Love your content and just subscribed. Looking for a good video on painting a Chevy Express or GMC Savana (you know, crummy GM White peeling paint issues). There's some not so great videos via the youtube search. I'm amazed that there are isn't some franchise specializing in painting contractor vans in every major U.S. City. I'd like to go White to Green before doing vinyl lettering. I have a fully wrapped Savana van and it looks awesome but am thinking (or at least hoping) that I could paint and vinyl and have it look nice for quite a bit less...plus I'd like to learn to paint and own 5 white vans.
Thanks for tuning in!
I have a 2012 honda civic, where can I get that paint kit from? Seems like a crazy question but I just found this video on TH-cam. Thanks
Speedokote sells everything you need! Start to finish
why is that clear coat so yellow in the cup?
When is your new paint guns coming out
Crazy you asked.... New prototype just came in yesterday! Should be launching come April!!
Nice it definitely has finally been done I was wondering about this for sure 👍🏾 🔥
I commented I was going to do it in pervious videos finally had to step up and do it
@@speedokoterefinishnetwork4937 it definitely looks good for sure
Should've R&I everything to do it right to prevent peeling but it came out good
Cheap jobs never get r&I
Mid grade paint jobs some r&I
Oem quality respray full r&I
This was just a cheap respray to show my fans / subscribers what you can do at home without much complications or much money.
However yes full r&I is the best way
You definitely ain’t the first but I appreciate the enthusiasm 😂
Post a link of who else has done it on video. I would love to watch
I have a question for you. I have two different, TH-cam channels, Troy‘s restoration and Troy‘s restoration 2.0 I do car restoration and Arcade restoration where I paint on both of those channels I have tried the SMR 21 had pretty good results with it. I spray in a heated spray booth, so I bake it at the end, I just picked up some SMR 1150 have not tried it. Is it a good clear what’s the longevity of it? Obviously it Hass to do with how well somebody takes care of it. Just wondering if you ever used it and what were your thoughts on it? Any tricks that I need to know thank you, Troy.
Super good clear for the money. Only thing I don't like about it is first coat is almost useless with this stuff, but my second coat it glosses up super nice and longevity I would expect it to last at least 4-7 years bakeing out in the sun
OK good to know thank you for getting back to me. I watch all your content and I love it. I like the fact that you do shit on the cheap I like to do cheap paint jobs. Unfortunately I have to do a lot of high-end ones.Witch takes along time
So when are yoi going to throw up a poll so us viewers get to vote on what beverage you spit onto a panel next before paint?
This weekend bro!!!!!
@@speedokoterefinishnetwork4937 😅great!
@@sinformant dude I had to throw in that short of the old guy.... I was dieing over that I'M NOT THE ONLY ONE 🤣🤣🤣
I saw that you changed the knob on the compressor to 90psi. Is there a reason for that an why? Asking respectfully.
I actually should have set it for less that way I had more consistent pressures
@@speedokoterefinishnetwork4937 so what’s that knob for? Is that knob for when to turn on the compressor?
curious how often are you cleaning your gun?
lets say on this job how many times did you actually break the gun down and fully clean before spraying any other coats? or did you just let it rock?
im having an issue where i can lay down about 2 quarts, however after the 2 cups are finished if i dont break down and clean my gun, it gets clogged and starts sputtering and spitting paint.. smh
i have an 80gallon, decent compressor so it isnt a lack of air but im wondering why i gotta clean so often?
i watch a local painter and doesnt matter what he sprays whether single stage enamal, waterborne, ppc etc etc he breaks his iwata down once..
if i dont break it down eberytime my paint jobs are shit.
Speedokote sells a spray can spray gun cleaner that you squirt in the top and run it through the gun. I don't have to break down my gun very often because of that. Mabey once every two weeks. It's nice
thank you sir, def investing in that product asap.@@speedokoterefinishnetwork4937
Im in baltimore county where is your shop located
Central Pa not far
It would have been more believable if you actually showed the air compressor being used in real time in real speed
It was right behind the car the entire time, you can see it in the video when I spray the rear passenger side quarter panel with the air line going right to it.
@speedokoterefinishnetwork4937 yes you can see it but you really can't nor hear it recharge 🤷♂️
@@waymenlawrence2064 I'll post a TH-cam short just to prove im a honest person, does that help?
@speedokoterefinishnetwork4937 just make another video actually showing the compressor in use with no overvoice
@speedokoterefinishnetwork4937 your trying to say your the first one to do this but your video is too edited and it doesn't show much
Dam i bought the McGraw 20 gal oil lube compressor. I was gonna get this vevor. I still might because its cheap too. But i need some old Honda paint. B37m-3 i think is the code. Florence blue metallic
20 gallon might do you a little better
@@speedokoterefinishnetwork4937 yea I remember you're older videos and where you used it to spray that Lexus. Thanks for mentioning the cold thing too
I'm glad i have patience but whoever painted the ef last did horrible. It's straight sand pile and tiger striped lol they tried atleast though!
Great video. Considering repainting my 1999 Tacoma. What about the emblems…if I wanted to keep their original color, do you suggest I scrape them off, then reglue them?
@@lmbgaming91515 yes they have to come off
@@speedokoterefinishnetwork4937 what glue should I use? Also, how do I get a hold of the gun you were using?
@@lmbgaming91515 honestly buying new emblems would be best . They come pre glued . Peel and stick easy
@@speedokoterefinishnetwork4937 what about your gun? You mentioned it was your own product…how do I buy it?
@@lmbgaming91515 email over your
-mailing address
-cash app info
-phone number
cash2kcars@gmail.com
Please keep any and all questions about products on here as that email is for orders only
Mannnn i know im off subject but what episode of the Simpsons was that in the beginning lol
No idea 🤣🤣🤣🤣
@speedokoterefinishnetwork4937 lol thanks.. searching I must lol
Hey what psi were you spraying at?
No idea wasn't keeping track cause can't keep constant pressure with that small of a compressor just to be honest 🤣
Totally winged it
Hello, I asked another TH-cam painter about a month ago to do EXACTLY what you just did. I got well over 100 replies to my question/comment. THANK YOU for doing this! I did not ask he use a 6 gallon compressor though :). Amazing. I took an old 21 gallon HF compressor and put a 2 piston 2 HP oil less motor on the tank. I'm going to try and spray a car with it. Is that an HVLP or LVLP spray gun you used with the small compressor? Does Speedokote offer OEM colors? I know you have a business to run but helping us DIY'er out like in this video is really nice. Thanks!
So to answer your question, hvlp lvlp doesn't matter your going to run out of air and have to wait for it to fill up.
And yes speedokote does sell oem colors to match by code. That's what I used in this video
I'm amazed on how beautiful your paint jobs turn out looking out for our pockets!!! Thanks for sharing the tips and tricks!!! Awesome job Man!!!💪😎🙏🙌
Much appreciated!
Nice. I've pained a few cars with the craftsman 6 gal
Should have filmed it!
Lmao doubt that. 6 gallons you will be able to spray a door handle and the tank is empty
@@thomas-gj7pp I actually used a 6.6 gallon for this video. There is a short where you can hear compressor going and see it in come clips. Not a lie. Not fake. Actually happened
You should have thought this one out. This video insults the intelligence of your supporters. Not your "fans" this guy thinks he's a famous actor all of my "fans" 😒
So people that fallow me every single video, every week, for years, are not fans? Please educate me...
@@Juliopaints your more than welcome to leave if you want.. I have fans, subscribers, and followers... If you don't like my verbage that's YOUR issue, I'm not here to tippy to around people's feelings and word things carefully. Wrong channel man. And as far as your insult about me being "to cocky" These type of claims usually come from the grown men who haven't made anything of life and are extremely envious and jealous that a 31 year old has made it farther than most 40-50 year olds. But carry on mate 🍻
@@speedokoterefinishnetwork4937 cheers mate 🍻 and if by "further in life" you mean material items / business. Then 👏 I'm sure you don't mean internal happiness from family and friends but we all know what you mean 😅 💰💰💰
🤣🤣🤣🤣
Hey great job!! How much paint should it take to paint an entire car? Would you do 1 or 2 or even 3 coats? Thanks..waiting for calm cool days!
If I was doing a full color change I would have gotten a gallon.
But for a same color oem respray like this with minimal body work , 1 qt kit
If you needed to extend your paint would this be a good place for some clear base + premixed color???
If you need to extend your color, start by covering primer areas with some old "junk paint" That's the best method I have done
Thanks for doing this for us Marco I think we all appreciate the time and cost you put into it. I'm really happy that someone has finally done a full respray using a small 6.6 gallon compressor it just goes to show it can be done, the car looks amazing as well mate nothing wrong with that👌🙏👍John UK
Absolutely!
Great video, as always! Much love from Miami! What products would you recommend for a diy guy in this miami heat?
Smr42 with medium or slow activator
X-slow speedokote reducer
Great job brother. It looks good. Trying to get my garage cleaned out so I can play with my old pickup.
That's the hard part lol
Marco - internet police here - even I think this one came out good. No buff, no corrections, just send it.
True🤣
lol... you made me laugh.
Spit and wipe do it for ya?
Good job! So the panel - paint your wheel is the they!?
Sorry Marco , have to ask, you did this job with your gun- a ordenary professional gun, IF YOU DONE IT with your TEEMU -gun, what do you think have been the different or similarity to this spray....? And sorry again, if you used a LVHP- gun, whats the similar vs non similar things you have to do.....⁉️
Ok, now maybe a tip for you - I know that you are a clever guy...😜.... But if you could get hold of panels of a car...(thinking maybe cheaper then a hole car, you know I'm swedish so little of the car and parts- prices in US) or GET A CAR (A= for tinkering around car- tryout car)...to do ANYTHING AND EVERYTHING WRONG to do car....Sorry I hope you can understand how I meaned......? Good job!
Almost all the sub 300$ guns right now are from China.. However difference is some go through through testing and quality control before released.. Others not. This is what makes the price difference.
And yes I've been thinking of doing that 🤣
Awesome results! You always throwing out all these wild challenge scenarios and come out great.
Yes I try man!
Dawg!!!
😎😎😎
The choice of music. Top tier. The one beat where you show the car. That bass is niice.
Appreciate it !
Why you putting down the base model TL man😂 a set of wheels, some tint and gut the cats and you've got a cool car. TL-S in a manual though 🔥 the body style has held up with time. Looks great 🤘
It's mostly dumb kids and broke wana be bill gates around my area that drive them that's what makes me hate them.
Over all not a bad car for a around town f-off car 🤣
@@speedokoterefinishnetwork4937I bought my 04 in 06 with 30k miles on it so maybe a different feel. The seats were nice and soft and pretty quick for a Honda 😂
@@Joeshomegarage yea the people that bought these new were a different class.. This was successful middle class / upper middle class Americans who wanted a luxury car.
Now it's a screw boy car 🤣
Nice 💪💪💪💪
Thanks!
Would this work on a single stage? Single stage is a little thick than basecoat clear coat, I wonder if there’s any difference? Great video all and all!
With a tad of reducer and x slow activator absolutely
Thank you sir, for a free and vital info!
You're very humble it looks gorgeous!!
I try man!
Great video. What can I do about an '01 Ford truck with spider cracked black paint? Do I sand it all down to bare primer and then spray or can I just scuff, skim and paint? I just want a nice 10 footer.
Pretty much sand down to primer. Not a fun job.
@@speedokoterefinishnetwork4937 Not great news but thanks for the help. 😃. Keep up the great work.
@@MikeWolf-427 absolutely
Love and appreciate your videos Marco!
Thanks!
Spit & wipe 😂😂 love it! Great job as always
Thanks 🥰
Can’t wait to see a crazy paint job on that rollback! Excellent work as usual, keep it up man!👊
I'm actually debating on getting a 2019-2022 crew cab 5500 .
So this one I might just redo the white to freshen it up and clean it up good
Sweet, I really like my 4500, if I ever get it back 😂
@@seanfalter9903 any day now lol
can you do some experimenting with denim pads for cutting and buffing if you haven't already?
Absolutely!
Just to update you, I just bought them right now. I am here to bring you content you guys want to see!
@@speedokoterefinishnetwork4937 Hell yeah bro! That would be sick if the denim can knock out runs and sags after hitting them with the razor blade trick.
Nice job 10 star ⭐️
Thanks!!
What air compressor hose is that
Just a harbor freight one
Yes he is one of the greatest minds
Much appreciated!
It came out amazing.
Thanks!
Looks Great Bro. #LGB
Thanks man!
your the man!
I try!
Since we can only say good things or be deleted great video mate. And very very believable 👍
Generally speaking..... I have 0 issues with people giving education advice which can help me and my viewers.
Derogatory comments, however yes will be deleted and the people who make them will be muted from my page. Meaning they can still view and comment on my page but no one including me will see the comments.
@@speedokoterefinishnetwork4937 noted, ok so I will not say that I don't believe this was even possible. I will say this was very possible. I think you will be the only one on TH-cam to do this one. Great job 👏👏
@@kenny54231 I have yet to see another person on TH-cam spray an entire car with the 6.6 gallon vevor.
Panel paint absolutely. Not a whole car
@@speedokoterefinishnetwork4937 my friend you will not see that ever simply because it is not possible. Most other channels are very transparent. Great video buddy 👍
Came out great.
Thanks!
😩 "promosm"
I have that car
It's a good little beater.
Round 2!
😂😂😂my bad man
It's all love haha. That glamour clear always comes out nice! @speedokoterefinishnetwork4937
@@acevedohiram so I find this clear to be best for super cold weather like 25-45 degrees is best. Anything Warmer I grab the smr42 or the smr32
@@speedokoterefinishnetwork4937 do you use accelerator for the base in those temps?
It would be nice to see a comparable Urechem Speedokote comparison, big Thumbs Up on this vid
I used urechem back in the day 0 complaints
Mannnn how in the hell 😮 you a bad man. Salute 🫡
That's a magic trick I'll have to see that in person. 😅😅😅
I told you I was guna do some stuff to blow this whole TH-cam paint community out of the water 😂😂😂 YOUR TURN BIG G 😂😂😂
@@speedokoterefinishnetwork4937 🤔 man I'll have to paint a car while riding a camel 🐫 to beat that.
@@thetriggerman954 😂🤣😂🤣🤣🤣🤣 wait till you see my next video bro... Im actually going to top myself
@@speedokoterefinishnetwork4937 😲 he's gone mad I tell u. 😲😲😲😲