Good video, thanks! I've got a 2013 Accord Sport with a manual, 122k right now and mostly trouble free, but that's tanks to preventative maintenance like you show in this video.
Thanks for uploading such a detailed Video. My 2015 Accord Lx,92000 miles is Missing while moving out of a stop sign, the car will hesitate to move then will pick speed after 1-2 second of pressing gas). Recently the check engine turned ON..
So the part # is 12030-5a2-a01. Honda original is 55ish$ knock off is 30ish Great video also you can do this job WITH OR WITHOUT OIL. Ill i did was replace seal my honda had 170k miles as well. But again AMAZING video and informative like fbi interviews. Took me 30mins once i saw this video 5 times on different days.
Man this is helpful but I cant stop thinking to myself with all the plastic. They don't make them like they used to 😒 great video man hitting like for the others
Thanks for the video. Bought a 2017 Accord and at 63k miles the valve cover gasket is already leaking significantly. In my 01' it lasted until 200k before I had to change it.
Great video! I'm about 140k miles on my 2013. This engine has been bullet proof so far but i do need to get my preventative maintenance done as small leak started developing around the head cover.
@@Brandon-id1td valve covers gasket failed, and caused a leak. By this time i also had replaced a starter, and rear wheel bearing. And a tension pulleys due to noise it was making.
@@jasonb8307 ya mine is making a weird clicking sound I change the serpentine belt it seems like it’s only at start up.. I’m leaking oil for valve cover and my spark plugs are misfiring I think it’s time to replace the gasket?
You mentioned NO OIL in the engine, what is the reason for that? I am only replacing the gasket. Does the "NO OIL" have to do with the valve adjustment? Thank you
Thanks for the video! I have a 2014 Manual 2.4 with 204,000 Km. I have a horrible rattle on start up. I’m thinking of calling her the “Rattle Box” The V-teck actuator was change at 158 or so just in warranty. But it’s bad again. It’s used oil since new, not that bad. What air intake do you have I see?
Thanks a lot, really well-explained video! I apologize, but a couple of questions are on my mind: I heard the leak could be coming from a bad PVC valve, is that true? Do I need to change the valve instead to replace the gasket? Any help with the gasket maker, what is the best and has a little amount ?? I don't need to buy something for only a few drops! Thanks again!
Just went to check my tensioner pulley because I've had a new noise when the engine revs. Was planning on replacing it so I took the drive belt off to check and the pulley is smooth and doesn't make any noise. Started looking around and saw oil near the valve cover gasket. I recently had to add a quart, which is something I've never had to do. I have a 2014 with 71k miles on it. Have you ever heard of the valve cover gasket needing to be replaced this early? That's what brought me to your video. I appreciate the depth you went to in your explanation. Thanks in advance.
@@carlspackler91 Man, I hope so. My 93 Accord was easy. I watched this video on the valve cover gasket replacement and it seems a lot more involved than the older ones. I'm swapping out the PCV valve, as well.
Well done video, thank you. Just one question about rotating the engine. In the past Honda engines rotated counterclockwise has this changed on this engine?
Excellent video the best so far!. Question I have 2015 Honda accord sport 4 cyl can you provide OEM valve cover gasket set with all the small gaskets part# for my vehicle?
Well made video. What is the purpose of the little squarish gasket on the middle inside of the cover? It looks like it communicates with a port going down the block.
I do notice when i change my oil im down quite a bit from when.i.put new oil in, also do you wver get a noise when shifting into park a sorta buzzing noise i have a video i put up of the noise itself n its driving me nuts cause i.cant find where.its.coming from
wow that engine is spotless. My 2012 has a dirtier engine and i'm at 93k. My question is, the dealer told me my "timing chain case cover is leaking", and when I look down on the side of my engine there is a bit of dried oil. Would changing this valve cover gasket fix that or do I need to change another gasket?
I have the same Honda Accord 2017 Sport with only 25.000 miles on it. The car is loosing coolant but not much just a little bit after 5.000 miles changing oil. Coolant in reservoir is lower than MINIMUM LINE now. just bought it brand new in 8/2017 from a local dealer. any recommend sir?
Great video! Wifey has a 2015 CR-V with this earth dreams engine. Is the valve clearance the same? A lot of the info ive searched for shows the regular K24 specs and directions.
Thanks for video. I just did the starter on my accord today at 95k. I bought a remanufactured one for 70 bucks. Not as good of deal as you got on yours but it still was not bad. Thanks again for making these videos. The starter replacment one really helped me out. So 170k on the Accord now huh. How much longer do you think you will keep it?
My 2013 Accord needed a new starter at about 100,000 also-- worked great until one day my wife stopped to get gas and engine would not start... No warning- I read that they were designed poorly in that slip ring dust gets into a contactor inside and shorts it out-- I replaced with a remanufactured one also but afterwards I wished I'd just got a new one from Bosch as it likely isn't a poor design like the Honda OEM one.
Awesome videos man....how are your spotted and drilled rotors holding up?....I’ve had fairly consistant issues even with Honda’s rotors with a little bit of warping...just curious on what brand rotors those are and how they have held up
The throttle body is super touchy and it can major problems if you throw off the position during cleaning which may require a trip to the dealer. I decided I didn’t want to be blamed if that happened to people.
i have 15 accord sport would you give a link for the parts?? or should i get one from rockauto or 1aauto? im kinda worried about parts quality. appreciate the feedback.
Ashraf Sunesara Yeah, I meant to do that, but time is always an issue for me. The tools are listed quickly early in the video. It’s mostly basic tools other than the feeler gauge which you can get at any auto parts store. Make sure if you do buy a feeler gauge that it has the size you need. I also highlight my other video with valve adjustment at about 6:30. Good luck and take your time.
Hello Michael, what do you think about oil catch can installation? Would you recommend? Rumours say installing one can prevent oil burn and valve cover gasket leaks...
Hi I have a Honda Accord Sport 2.4 2013 with a mechanical gearbox. Could you please show how to replace an oil in a mechanical gearbox. Thank you in advance.
Hi Michale,,I have 2016 Honda Accord,,,,the engine looks about the same like your car ,,,now I try to replace the brake flush , but I couldn’t find out where’s the brake flush locate at ,,,,,please help,,, thanks
At 5:37 there are good mm measurements but obviously incorrect inch measurements. People should try division by 25.4 to reveal that the intake range is 0.008-0.010 in or 0.0083 - 0.0098 in.
Andres Cruz vazquez changing the valve cover gasket is pretty easy with this video and doesn’t require rotation of the engine cams. Rotation is just for measuring valve lash / timing gaps.
Hi Michael, thank you for sharing this video that will help me in the future. where did you get the steps you showed in the video can you share the PDF or is there anywhere I can get the maintenance book that shows how to do any job in the car? I have a 2013 accord 4 cylinders and right now I have 125k miles on and do not have issues and im thing to do the water pump. Thank you and appreciate any help
I bought a 2016 honda accord used and recently I am noticing im losing oil somehow and i checked all around the engine also underneath but i cant find any leak. I noticed one thing around the gasket cover its kinda dirty and black all around it could this be the issue? but I don't see leaking but it's dirty and black. should I change the gasket cover? I changed the oil twice so far and not even 2000 miles my oil is below half on the dip stick. I drive a lot and also do uber. my car has 40000 miles on it currently. I'm guessing this car maybe in a car accident before but I don't know. Do you think I should change the gasket cover and see what happens?
Hi Mike, i have a question for you. I have the exact same car Honda accord 2014 Lx (same color) I just got back from the honda dealer because i had code P0128 and P0303 (mis fire on cylinder 3) And they told me that i blew my head gasket and need a new or used engine. I then took it to 2 mechanics and believe honda is taking it to a hole different level. What is your advice on that? and can i just replace the heads on it ? i dont want to replace the hole engine its very expensive and not thinking on keeping it for more then a year. Please help! Im stressing out and very confused!
What caused the initial issue? Did it overheat or were there any other signs of problems? If you do need an engine ebay is the cheapest and they offer engines out of salvage cars for less than $1000.
Personally I drain the oil first and when finished I pour another quart down with the drain plug off to wash out anything that may have come loose during the job.
@@Sunshone7311 i gotcha, i thought it was required. but im assuming its just a preference? but a great preference in that instance to avoid any contaminants
Nice video. Have the same car and I see seepage from the valve cover gasket. Does your engine consume alot of oil? Mine has from day 1 but not enough for Honda to do anything about it. Seems like consumption has gone up alot recently.
Zimbo Simmons check the torque on all 8-10 bolts. If you can tighten a few (gently with one hand on the ratchet), then you may be able to stop the leak in about a minute.
Awesome, thanks! So thorough and meticulous! Man... That engine bay, so clean! If you hadn't said the mileage, i would have guessed it was brand new!
Thank you, it’s easier to keep clean in California
About the best mechanic video I've watched in the last couple years... Enough said
I hope TH-cam has similar heart bypass surgery videos where a guy just digs around and just calmly narrates the way you do.
Wow, most comprehensive video out there! I really appreciate the time and effort you took to explain and walk us through the process.
-Cheers
I learn so much from you, thank you, Michael.
That micrometer trick is gold.. Thx!
Thank you after watching other videos. I still had questions you answered them all in great detail and quickly way to go awesome job.
Pro tip: disconnect the battery to ensure the alternator wire doesn’t accidentally short the fuse in case it touches something
Excellent video, explained in good detail
Good video, thanks! I've got a 2013 Accord Sport with a manual, 122k right now and mostly trouble free, but that's tanks to preventative maintenance like you show in this video.
Thank you for the advice on using the micrometer. Great idea.
I have same car, That’s really helpful...thank you.
Great video! Very informative. Well produced. Thanks for making it.
Great video. Very well done and thoroughly helpful. Thank you.
Thanks for posting this very helpful video.
Doing mine now. My 2014 LX is at 220k i definetly needed to see this video. Awesome & Thanks!
How did you make the CVT last so long?
What do you mean? Lol. I do my own Maintenance and just drive it normally, well more than normal considering i drive for Uber often.
Great demo! Thanks for sharing!
Thank you, keep the good work.
This video is helpful. Really helped me.
Great video 👍👍👍 I have a 2013 honda accord the same engine and I'm hit 150k so I'm need to do this. Thx u
Thanks for uploading such a detailed Video. My 2015 Accord Lx,92000 miles is Missing while moving out of a stop sign, the car will hesitate to move then will pick speed after 1-2 second of pressing gas). Recently the check engine turned ON..
Let me quess, po172 leaking fuel injector
Great video man 👏🏽
So the part # is 12030-5a2-a01. Honda original is 55ish$ knock off is 30ish
Great video also you can do this job WITH OR WITHOUT OIL.
Ill i did was replace seal my honda had 170k miles as well.
But again AMAZING video and informative like fbi interviews.
Took me 30mins once i saw this video 5 times on different days.
always buy OEM parts when working on a Honda
Great video, well done.
This is good Video to learn how to repair gasket. Get it
Excellent video Michael, i wish i had the luxury to work on my own car... guess i will go to the dealer for the same.
Accord 2014 90Kms
Sohail Kazi maybe wait for 175,000 km to do this job. That may be 2022 for you.
170k and your engine bay looks good as new. 🤩
Man this is helpful but I cant stop thinking to myself with all the plastic. They don't make them like they used to 😒 great video man hitting like for the others
Thanks for the video. Bought a 2017 Accord and at 63k miles the valve cover gasket is already leaking significantly. In my 01' it lasted until 200k before I had to change it.
replace your PCV valve
Very good video!
Thank you
The best!
Great video! I'm about 140k miles on my 2013. This engine has been bullet proof so far but i do need to get my preventative maintenance done as small leak started developing around the head cover.
What did you get done?
@@Brandon-id1td valve covers gasket failed, and caused a leak. By this time i also had replaced a starter, and rear wheel bearing. And a tension pulleys due to noise it was making.
@@jasonb8307 ya mine is making a weird clicking sound I change the serpentine belt it seems like it’s only at start up.. I’m leaking oil for valve cover and my spark plugs are misfiring I think it’s time to replace the gasket?
@@jasonb8307 my Honda is a 2013 Honda Accord sport with 120k
@@Brandon-id1td nice! Ive just reached 170k today
Good video!!!👍
Awesome video! Any chance you could share the workshop manual?
You mentioned NO OIL in the engine, what is the reason for that? I am only replacing the gasket. Does the "NO OIL" have to do with the valve adjustment? Thank you
Thanks for the video! I have a 2014 Manual 2.4 with 204,000 Km. I have a horrible rattle on start up. I’m thinking of calling her the “Rattle Box”
The V-teck actuator was change at 158 or so just in warranty. But it’s bad again. It’s used oil since new, not that bad.
What air intake do you have I see?
Thanks a lot, really well-explained video!
I apologize, but a couple of questions are on my mind:
I heard the leak could be coming from a bad PVC valve, is that true?
Do I need to change the valve instead to replace the gasket?
Any help with the gasket maker, what is the best and has a little amount ?? I don't need to buy something for only a few drops!
Thanks again!
Just went to check my tensioner pulley because I've had a new noise when the engine revs. Was planning on replacing it so I took the drive belt off to check and the pulley is smooth and doesn't make any noise. Started looking around and saw oil near the valve cover gasket. I recently had to add a quart, which is something I've never had to do. I have a 2014 with 71k miles on it. Have you ever heard of the valve cover gasket needing to be replaced this early? That's what brought me to your video. I appreciate the depth you went to in your explanation. Thanks in advance.
71k isn't at all early for a valve cover gasket. I'd say it's an easy and cheap place to start.
@@carlspackler91 Man, I hope so. My 93 Accord was easy. I watched this video on the valve cover gasket replacement and it seems a lot more involved than the older ones. I'm swapping out the PCV valve, as well.
Well done video, thank you. Just one question about rotating the engine. In the past Honda engines rotated counterclockwise has this changed on this engine?
Excellent video the best so far!. Question I have 2015 Honda accord sport 4 cyl can you provide OEM valve cover gasket set with all the small gaskets part# for my vehicle?
Hey I was wondering were did u buy the gasket or if u have a part number they don’t have them at the local auto parts
So would I need to worry about the crank position if I'm just replacing the gasket?
Well made video. What is the purpose of the little squarish gasket on the middle inside of the cover? It looks like it communicates with a port going down the block.
I do notice when i change my oil im down quite a bit from when.i.put new oil in, also do you wver get a noise when shifting into park a sorta buzzing noise i have a video i put up of the noise itself n its driving me nuts cause i.cant find where.its.coming from
wow that engine is spotless. My 2012 has a dirtier engine and i'm at 93k. My question is, the dealer told me my "timing chain case cover is leaking", and when I look down on the side of my engine there is a bit of dried oil. Would changing this valve cover gasket fix that or do I need to change another gasket?
Where did you buy those rotors from? They're really nice! thanks for the video. It really looks easy to do. Feel very encouraged.
Power Stop
So b4 u.did that u removed all the oil n replaced with new oil once u wer done?
Do you have to drain the oil first?
170.000 miles. Waow. My 06 accord just has 119.000 miles.
Maybe because of different Quality? WhatsApp: 8617858512295
120 on my '16. Catching up!
I have the same Honda Accord 2017 Sport with only 25.000 miles on it. The car is loosing coolant but not much just a little bit after 5.000 miles changing oil. Coolant in reservoir is lower than MINIMUM LINE now. just bought it brand new in 8/2017 from a local dealer. any recommend sir?
do you make timing chain adjustment for this accord?
Great video! Wifey has a 2015 CR-V with this earth dreams engine. Is the valve clearance the same? A lot of the info ive searched for shows the regular K24 specs and directions.
Thanks for the video. DO you have a video for how to adjust the valve?
Smfh lol
Thanks for video. I just did the starter on my accord today at 95k. I bought a remanufactured one for 70 bucks. Not as good of deal as you got on yours but it still was not bad. Thanks again for making these videos. The starter replacment one really helped me out. So 170k on the Accord now huh. How much longer do you think you will keep it?
My 2013 Accord needed a new starter at about 100,000 also-- worked great until one day my wife stopped to get gas and engine would not start... No warning- I read that they were designed poorly in that slip ring dust gets into a contactor inside and shorts it out-- I replaced with a remanufactured one also but afterwards I wished I'd just got a new one from Bosch as it likely isn't a poor design like the Honda OEM one.
Sold it 180k, still ran great. That’s the mileage I usually move on to a new car. Sold it to HS kid and last I heard it was driving great for him too.
folks, 170k on a Honda is just barely broken in for the engine. that is not high mileage
Do you drain the oil out the system?
Awesome videos man....how are your spotted and drilled rotors holding up?....I’ve had fairly consistant issues even with Honda’s rotors with a little bit of warping...just curious on what brand rotors those are and how they have held up
They held up well, sold the car at 180k with no issues.
Make sure you have the angled pliers for a way easier job
Hey, where can I find that guide and print it?
Thanks for all the vids, at about 132k on mine. Do you have VTC rattle on start up?
Yep, I just learned to ignore it since it apparently doesn't hurt anything.
Awesome and well explained video. How's the oil consumption so far if any?
check engine oil and transmission oil regularly these engines leak badly at 60k miles .
what kind sealant you used?
great video. can you do one on throttle body cleaning?
The throttle body is super touchy and it can major problems if you throw off the position during cleaning which may require a trip to the dealer. I decided I didn’t want to be blamed if that happened to people.
Question where did you get the instructions from i have a 2013 honda Accord 3.5 l and can’t find a video on that fix
Great video Michael! Question, how often should this service be done?
Every 100k or when you delvelop a leak or valves are noisy.
i have 15 accord sport would you give a link for the parts?? or should i get one from rockauto or 1aauto? im kinda worried about parts quality. appreciate the feedback.
Fantastic video, Michael is it possible to put link to the tools you used? i will be doing this soon my 2014 is at 150K
Ashraf Sunesara Yeah, I meant to do that, but time is always an issue for me. The tools are listed quickly early in the video. It’s mostly basic tools other than the feeler gauge which you can get at any auto parts store. Make sure if you do buy a feeler gauge that it has the size you need. I also highlight my other video with valve adjustment at about 6:30. Good luck and take your time.
Tell me, what kind of oil do you pour into the engine? How long does the oil change take?
what is the torque spec for the ignition coil?
Thanks for all the hard work you do. Where can I get that repair manual?
Its the online Honda subscription.
You got a link to that site?
Hello Michael, what do you think about oil catch can installation? Would you recommend? Rumours say installing one can prevent oil burn and valve cover gasket leaks...
I didn’t use one, but they are effective at keeping deposits down in the pcv system on direct injection and turbo engines.
Hi
I have a Honda Accord Sport 2.4 2013 with a mechanical gearbox. Could you please show how to replace an oil in a mechanical gearbox.
Thank you in advance.
Did you have carbon build up on intake valves since this 9th generation Accord has gas direct injection ?
Actually no, it never had an issue.
hello, from where u find your repair manaul. tank you
Hi Michale,,I have 2016 Honda Accord,,,,the engine looks about the same like your car ,,,now I try to replace the brake flush , but I couldn’t find out where’s the brake flush locate at ,,,,,please help,,, thanks
Can I see the cover valve bolt torque specs?
At 5:37 there are good mm measurements but obviously incorrect inch measurements. People should try division by 25.4 to reveal that the intake range is 0.008-0.010 in or 0.0083 - 0.0098 in.
How much torche did you use?
hey mike if am just changing the gasket do I have to route the engine?Or could I just change the gasket without moving the rockers
Andres Cruz vazquez changing the valve cover gasket is pretty easy with this video and doesn’t require rotation of the engine cams. Rotation is just for measuring valve lash / timing gaps.
Hi Michael, thank you for sharing this video that will help me in the future. where did you get the steps you showed in the video can you share the PDF or is there anywhere I can get the maintenance book that shows how to do any job in the car? I have a 2013 accord 4 cylinders and right now I have 125k miles on and do not have issues and im thing to do the water pump. Thank you and appreciate any help
I had access to the factory online manual. It’s an expensive service that you have to be approved to get.
Ok thank you very much
Are the valves adjustable onn a 2014 Accord or are they hydraulic lifters with shims?
They are solid with a top screw adjustment, no shims needed.
any carbon buildup problems
I bought a 2016 honda accord used and recently I am noticing im losing oil somehow and i checked all around the engine also underneath but i cant find any leak. I noticed one thing around the gasket cover its kinda dirty and black all around it could this be the issue? but I don't see leaking but it's dirty and black. should I change the gasket cover? I changed the oil twice so far and not even 2000 miles my oil is below half on the dip stick. I drive a lot and also do uber. my car has 40000 miles on it currently. I'm guessing this car maybe in a car accident before but I don't know. Do you think I should change the gasket cover and see what happens?
Check your pcv valve and change it if its stuck open can cause you to use oil
Just a question do u recommend unhooking the battery when doing this
Terrence Scott in the video he recommends disconnecting the battery, especially because you’re working with the alternator.
Do you know where I can find a video of a head gasket replacement to this same model car?
Sorry, no
Hi Mike, i have a question for you. I have the exact same car Honda accord 2014 Lx (same color) I just got back from the honda dealer because i had code P0128 and P0303 (mis fire on cylinder 3) And they told me that i blew my head gasket and need a new or used engine. I then took it to 2 mechanics and believe honda is taking it to a hole different level. What is your advice on that? and can i just replace the heads on it ? i dont want to replace the hole engine its very expensive and not thinking on keeping it for more then a year. Please help! Im stressing out and very confused!
What caused the initial issue? Did it overheat or were there any other signs of problems? If you do need an engine ebay is the cheapest and they offer engines out of salvage cars for less than $1000.
I have 17 accord sport and im at 122k highway miles, should i consider getting the valves adjusted
Not quite yet, around 150k unless it’s making noise.
valve cover gasket the same as head cover gasket ?as titled on this video?
Yes. Honda calls the valve cover gasket the head cover gasket because it is actually the head cover gasket.
ALSO CROSS REFERENCE NUMBER FOR GASKET
(VS50887)
Would you drain oil before you start this job?
I did it after so anything that gets in the only why working on it drains out.
Can you post a link from where you buy the OEM parts?
Honestly I hunt different online retailers for OEM parts. hondapartsnow is my primary source.
you mentioned at the end.. drain the oil prior to doing this job?? you said no oil when doing this job?
Personally I drain the oil first and when finished I pour another quart down with the drain plug off to wash out anything that may have come loose during the job.
@@Sunshone7311 i gotcha, i thought it was required. but im assuming its just a preference? but a great preference in that instance to avoid any contaminants
Have the same car.......I have a question have you done or know where the fuel filter is on this vehicle...Honda Accord sport 2013 6speed
In the gas tank
Nice video. Have the same car and I see seepage from the valve cover gasket. Does your engine consume alot of oil? Mine has from day 1 but not enough for Honda to do anything about it. Seems like consumption has gone up alot recently.
That sucks, never had an issue with oil consumption. I used Mobil 1 synthetic.
@@Sunshone7311 I use Royal Purple since the beginning. Never had a Honda do that. This is my 4th Honda. All the rest went 250k+.
@@eee2115 Yeah, I don't get it. It really sucks.
maybe replace the valve stem seals
I have oil leaking around the head cover, what does that mean?
Zimbo Simmons check the torque on all 8-10 bolts. If you can tighten a few (gently with one hand on the ratchet), then you may be able to stop the leak in about a minute.
Where did you get that strut bar...
It comes factory. At least it is on my '16 Sport
you drain the oil before you perform this correct?
tonyology no need to.
Can the head cover gasket be replaced without touching the timing?
Yes.
Michael I searched around and can't find the manual u show on vid , where can I find them ?
Its a subscription based manual directly from Honda for techs.
@@Sunshone7311 ok ty
Hi
How often do we need valve adjustment. My 2016 accord 2.4 has 168000km.
If the valve train is noisy or every 125k miles / 250k km.
The owner's manual has a maintenance schedule that tells you what should be checked every service interval.
Did we need to drain the engine oil before working on it?
No