As always, its the little extras that make the difference. My air assist is a separate switch and I often forget to switch it on until after a project has started. The check list has now been added to my setup. Its these almost throw away tips that keep me coming back. Good luck with your operation, and thank you.
Thanks, I need all the prayers I can get John! They're basically removing and realigning 3/4 of the lumber spine to relieve the nerves. I stopped wanting to know more when he started talking about a Dremel! 🤪
Thanks for the video, files and adding the extra spacer. I like using diluted alcohol inks to stain some of my designs and will be using red and green for this. What that means is staining the entire board red and another one green. Breaking apart the design and cutting them out on the specific color then gluing them together. Like you, I have a bunch of grandkids who I know will love this and use them for the coming years as well. Also something I do on your free file videos is put the link to the YT video in my LB show notes. Makes it easier to refer to it later. Good thoughts headed your way on your pending surgery.
Happy Holidays, Thank you Rich your generosity is greatly appreciated, I learn something new on every video I watch. I am wishing you a speedy recovery with your up coming back surgery
I love this!!! I haven’t downloaded it yet because I’m not on my computer but my fingers are crossed that it’s an SVG file since I don’t use Lightburn. Thanks for sharing!!!
Thanks for this I have 2 great grandaughters I will be making this for. Hopefully the postal strike here in Canada will end in time to send them. Also thanks for including svg file, as a hobbiest who doesn't sell my stuff and at 77 I can't see buying a subscription to lightburn. Got the 20 W. wecreat laser about a year ago to embelish and add my logo to woodworking I do, Videos like yours give me more ideas.
Hey Rich Thanks for all the great videos ! Praying all goes well with your up coming surgery. On a lighter note, Is that Joe Pass or you on your Tee shirt? Looks like you but also looks a lot like Joe!
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
As always, its the little extras that make the difference. My air assist is a separate switch and I often forget to switch it on until after a project has started. The check list has now been added to my setup. Its these almost throw away tips that keep me coming back. Good luck with your operation, and thank you.
Thanks so much Chris! I try to keep the tips coming!
Great video Rich. And we'll keep you in our prayers for a successful surgery and speedy recovery.
Thank you Andy!
Thanks Rich, Have a friend with two young children this will be perfect for them, thanks again, Stay Healthy Sir.
Thanks Guy, enjoy it!
thanks Rich. I will be making a couple of these for my Gkids.
They are going to love them!
This is a very nice project for those of us with grandkids.
They'll love it Jim! Make sure to tell them the story!
Thank you for sharing this with us Rich.
You're welcome Gene! Enjoy! 😊
This will make Christmas time even better. Thank you and God bless.....
You're very welcome Charles!
Nice project! Prayers on your back surgery, I have had 3. Hopefully you will get some relief!
Thanks, I need all the prayers I can get John! They're basically removing and realigning 3/4 of the lumber spine to relieve the nerves. I stopped wanting to know more when he started talking about a Dremel! 🤪
Thank you Rich! I'm going to love doing this with my grandchildren. Though and prayers are with you for the surgery, and hope for a speedy recovery.
You're very welcome Fernand, thank you!
Thank You Rich, will be praying for you that your surgery goes well
Thanks for the prayers Dan!
Also good luck with your pending surgery, i just had gallbladder surgery. sending well wishes
Thanks so much! Hopefully it'll resolve my sciatica!
This is so great! I have several kids in mind already! Thanks so much. Prayers for a speedy recovery!
They’ll love it! Thanks for the well wishes!
Thank you Rich, Praying for your quick recovery
Much appreciated, thanks!
thankx rich for this beautiful video and the wonderful story of santa
Glad you enjoyed it Luc!
Thx for this video and file Rich. Good luck with the back surgery and speedy recovery!!!!
You're welcome! I appreciate the well wishes Harold!
Very cute and great for kids Rich! Thank you!!!
They will love it Jerry, enjoy!
Thank you very much for all your amazing video’s, Everything I know about Lightburn and using my Laser is down to you
Awesome! 👍 Thanks for watching!
Thanks for the video, files and adding the extra spacer. I like using diluted alcohol inks to stain some of my designs and will be using red and green for this. What that means is staining the entire board red and another one green. Breaking apart the design and cutting them out on the specific color then gluing them together. Like you, I have a bunch of grandkids who I know will love this and use them for the coming years as well. Also something I do on your free file videos is put the link to the YT video in my LB show notes. Makes it easier to refer to it later. Good thoughts headed your way on your pending surgery.
That’s a fun and unique way to make them! I love it Larry! Thanks for the well wishes!
Great idea Rich! Awesome work
Glad you like it Mike, thanks!
Thanks Rich
You're welcome! Thanks for watching Roger! 👍
Happy and Merry Christmas
Merry Christmas to you as well!
Thanks again Rich!
Enjoy! Merry early Christmas Pop-Pop! 🎅
Once again, thanks Rich! :)
You bet Bill!
Thumbs up. Thx. Greetings from germany
Thanks for watching Michael! Cheers.
Good Luck with your back!
Happy Holidays, Thank you Rich your generosity is greatly appreciated, I learn something new on every video I watch. I am wishing you a speedy recovery with your up coming back surgery
Thank you Ken, back at ya Brother.
I am writing 6000 letters right now with stuff i want! Gonna make those elves work for their supper 😁
I'll mention to the elves to make sure they don't miss your house Mike 🤪
Hope your surgery goes well.
Thanks so much Rick! Much appreciated! 🙏
I love this!!! I haven’t downloaded it yet because I’m not on my computer but my fingers are crossed that it’s an SVG file since I don’t use Lightburn. Thanks for sharing!!!
You are in luck Lynn! I included the ai, dxf and svg versions! 😊
@ Awesome! You’re amazing - thanks again!!!
Thanks for this I have 2 great grandaughters I will be making this for. Hopefully the postal strike here in Canada will end in time to send them. Also thanks for including svg file, as a hobbiest who doesn't sell my stuff and at 77 I can't see buying a subscription to lightburn. Got the 20 W. wecreat laser about a year ago to embelish and add my logo to woodworking I do, Videos like yours give me more ideas.
Glad you’re enjoying the channel Rick, and I hope the strike is resolved soon!
This is so cool I literally lasered something like this today hahaha brilliant
Glad you like it! Brilliant minds think alike! 🤣
@TheLouisianaHobbyGuy they certainly do
Hey Rich
Thanks for all the great videos ! Praying all goes well with your up coming surgery. On a lighter note, Is that Joe Pass or you on your Tee shirt? Looks like you but also looks a lot like Joe!
I'm not wearing a t-shirt in this video Ray.