Fire Fighting Robot using Arduino by hobby project
ฝัง
- เผยแพร่เมื่อ 22 เม.ย. 2023
- Hii friends, this video is the upgraded version of the previous fire fighting bot. Now it uses an additional sensor called MLX 90614 (non contactless temperature sensor) which help the bot to measure the accurate distance from fire.
Purchase the whole components kit (including chassis,connecting wires........) or the whole project from us.
For more details and to place order mail me:-
jiishnumm@gmail.com
Code and Circuit diagram :- drive.google.com/drive/folder...
Fire Fighting Robot with sms and call alert :- • Arduino Fire Fighting ...
Thanks for watching - วิทยาศาสตร์และเทคโนโลยี
I would recommend adding more aggressive turn angles so the robot doesn’t drive into the fire but just faces towards it. For example make it so one side of the robot is driving forward and one side backwards and it’ll turn better
Could you please do a video where you explain everything about why you're doing this particular thing, what will be it's effect? That would help us a lot. Thanks!
In case you have the same problem as me, when I connected the batteries the car started to move forward. The problem is in a fire sensor. The solution is to disconnect all of them, the fire sensors, and connect them one by one until you find the one that has the problem. For that defective one, lower the sensitivity of the physical button on top of the dimmer.
Can you explain everything about components that why you're using the particular things what will be its effect....
Thank you 🎉🎉, i have bought all the components from hobby project for 3700 rs and delivered within a week, you are real lifesaver.
can u tell me how to buy?
can yiou tell me from where you buy?
There’s an email in the description
Hii how to buy this project
Instrumental?
يعني ما نعرف شلون نشكرك ❤❤❤❤ عاشت ايدك يا بطل كلش مفيد و كافي وبسيط ومرتب جداا ❤❤🌹🌹🌹🌹
Can this project run on Arduino Nano? I'm new to mechanical projects and don't have the slightest idea. So, it'd be helpful if somebody just explained me the difference between Arduino Uno and Nano
Can you please tell us where is water pump in circuit diagram
Hlw brother,just I want to khow which software u use to draw the circuit diagram?
It's very helpful for me,if u provide a circuit diagram drawing video as soon as possible.
Can I use mq2 sensor instead of the mlx sensor?
L298 ki jagah L293d motor driver ic use kiya to chalta kya sir...
Can temperature sensing fire suppression and flame detection be used together？😭😭😭😭🥺🥺🥺🥺
hello Im a shs student and i want to make this for our capstone project, is this working? please answer me we only have 1 month to do it and Im thinking about it what if I'll fail to make this😢
Bro can I use 12v relay module please reply
hi sir, is it possible to use the mlx90614 BAA sensor?? please answer🙏🏻
Can you give me a code where I don't use the MLX 90614 please?
Can you please tell me how to insert the wires
I got very confused with all the colours
Can I do it without using mlx90614?
can you send the code in the video because its different from the gdrive you gave in the description. please reply, thank you!
Can i know that from where 5v and gnd wire came
how do I code it if I don't want to use mlx on this robot
Bro can't open your code provided in the description
bro i want to buy all components so where i can buy?
Sir
i am a student trying to make this project for the exhibition
i am using 2 bo motors,1 servo,1 5v relay kit,1water pump,3 flame sensor,mlx90614,l298n driver,arduino uno
i try ur code but its not working properly
pls help
Hi bro
In which app we can do this coding please anyone tell me I am making it for my science project
Your code is showing invalid,,no mlx library showing
Hola estoy interesado en este proyecto, será que haces envíos a Colombia?
The code only work for adafruit mlx
bro pls help the sensors r sensing the fire but not moving anyhting'
Bro power supply is given to the circuit 5v relay's green light is continuously flickering. How solve this problem? 😢
Can this project work without MLX90164?🤷🤷
En caso de que tengan el mismo problema que yo cuando conectaba las baterías el carro empezaba a moverse hacia adelante. el problema está en un sensor de fuego la solución desconectarlos todos, los sensores de fuego y irlos conectando uno por uno hasta encontrar el que tiene el problema, a ese defectuoso bajarle la sensibilidad en el botón físico que tiene arriba el dimmer
Hi, we’re trying to make this project for our subject (electronics). We had to make an improvise material and we chose this. I just wanna ask what are the materials and the procedure. We will make sure to put all the credits on your channel.
if you are interested, you can purchase the complete project or the whole components from us
email :- jiishnumm@gmail.com
@@hobbyproject9557 what's the price?
3700 rupees
@@RishiosgHow long does it take to arrive
@@alex-uk8jy about a week
I didn't understand the connection of the bo motor
Nice project
bro water pump is not working
the drive link isnt opening, pls help
Sir what will be total cost of this components
Bro please tell me if I am making this project without (GY-906 MLX90614ESF Non-Contact Infrared Temperature Sensor Module) this item there have any issues on project working please reply me urgently
yes, it won't stop near the fire. here 90614 is used to stop the bot infront of fire. if you don't have mlx watch my previous fire fighting videos.
@@hobbyproject9557 ok thanks
Bro does it detect fire for sunlight???
Will this work i want to make it too school science evplease
arduino code please, I have to do it for my science project
Will this work i want to make it too school science evplease reply
I make the same using ur circuit diagram but my robot is not in control, before detecting fire robot started to move as soon as I put on battery. Please help me 😢
Bro what happened is it resolved
Easy, i had the same situación, Change the sensibily of the flame sensor, turning to the left, the dimmer switch
Bro please mene pehle hi 5k spend kar diye hai but project work hi nahi kar raha hai
I copy exactly your project and your code but still my project is doing differently and the pump is already on even though there is no fire.
Was the problem solved?
I in the same problem. What to do ? Do you have any idea please?
What software did you use to draw the circuit diagram?
Tinkercad
I want all the components how i can get it
Motor drive work nhi kar rha hi ap bata sakte ho connection kesa karna hii plz plz plz
The code what we have entered to verify before upload fo uno board it displaying an error about mlx sensor😢 can you reply please
install mlx90614 library.
@@hobbyproject9557how to install
hi bro can u plz give libraries for this
hi sir is there any way where we could not use the mlx 90614 if possible please post that circuit
yes, watch my 1st fire fighting robot video.
Can you come in Bangladesh for make this project
I can't open the code can I have the code pls
Gracias por tu ayuda
hi bro
im not able to open the "mlx_90614" file in the drive link
can you make it accessible
Download and open it using IDE software.
bro it is showing error
#include //include MLX90614.h library
1:50 I can't understand where the +5v and gnd wires are connected. I even checked the circuit diagram but still i am not able to understand. Plz help bro 🙏🙏🙏. I need it for my school project. Plz help. Btw nice video 👌👌👌
same here
Where is without mlx video
is that code is running
greeting sir... I am verry interested from your robot.... do you have a a schematic diagram for the the wirings of the robot?? thank you
check the description.
My robot aren't work
Can we do that without mlx and with flame detection?
yes , u can
Battery ki High voltage ki vajese Arduino.. Damage ho gya sir...hmne Arduino me connection se phle hi program load kiya isi vajese hua kya... Ya koi or reason hain...
No, it's something else.
I copy exactly your project and your code but still my project is doing differently and the pump is already on even though there is no fire.
Please help....
Budget
If i am using a 9v battery so should i use a 9v relay module? Please help 🙏🙏. Btw nice and helpful video. Thanks in advance.
Use Li ion or Lipo battery.
How far can it understand the location of the fire?
You are right
I make exactly as per ur circuit diagram but my robot is not moving Please give me some solution 😢
jiishnumm@gmail.com
what sensor you have put in water??
Water pump
i properly connect all the module and upload the code in arduino uno module bt my fire fighting robot is not work properly why??plz,give me a solution Sir
jiishnumm@gmail.com
Bro Can You Please Give Me Code !
I think I will buy the project but where I can do that ?
jiishnumm@gmail.com
Hi brother i see this video and make project but code issue💔💔 plzz plzz tell me
I all so same problem bro and install the library
Coading gat bro please
Sir what is the total cost
For the project components
Please reply sir it's very urgent 🙏🙏🙏🙏
3800/-
@hobbyproject9557 Bro water Pump is contineous running
interchange NO and NC pin on relay module.
Does arduino uno r3 come with coding
No, but if you need i can do that for you.
@@hobbyproject9557i also need
sir temperature sensor is necessary? can I make without this sensor?
yes u can, but it wont be accurate.
I have brought everything from hobby projet for 3100
Bro kaise contact Kiya please reply 😢
هذا صار مشروع تخرجنا 🏌️🏌️🏌️🏌️🏌️✨
why is the code not open??
ino file open using IDE software or download and change its format from .ino to .text
Mlx 90614 ke bina bna skte hai
Yes with flame sensors
No such file or directory found aa raha hai adafruit ke liye
include mlx90614 library.
@hobbyproject9557 thnk u..but just mlx library didn't worked... adafruit_mlx library worked
Does it includes wire for Arduino uno
Bro plz tell I want to buy kal panvel ko jana hai
yes
Bro code error vasthundi
kay aap hame all program sed kar sakate he kay
Provided in the description, if you are interested to purchase component kit mail me. jiishnumm@gmail.com
The file is can't open
Please could you send in my gmail all program
???
Bro the is not dumping to uno
Code is getting error and not dumping to uno
How to clear it plzzz tell?
This code is not working please sloved it sir
In file included from C:\Users\Anuhas\AppData\Local\Temp\.arduinoIDE-unsaved20231113-1244-11ak2jc.t387k\sketch_dec13a\sketch_dec13a.ino:5:0:
C:\Users\Anuhas\Documents\Arduino\libraries\Adafruit_MLX90614_Library/Adafruit_MLX90614.h:18:10: fatal error: Adafruit_I2CDevice.h: No such file or directory
#include
^~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
exit status 1
Compilation error: exit status 1
Pls tell overall price of kit
Complete project for 5k excluding delivery charges.
@@hobbyproject9557 perdon mi ignorancia pero no entiendo que significa 5k
Kindly share contact i want to busy
Can anybody send me the code in comment pls🙏
Mlx 90614 ke bina bnaa skte hai kya 4:25
Pls reply
yes, watch my first Fire Fighting Bot video.
How will buy
jiishnumm@gmail.com
Mlx ke bina bna skte hai kya
Please reply
Yes with flame sensor
haa
upload programming language
Code share krdo bhai
Bro In the code adafrupt_luxa90614.h : no such file indicates or directory
include mlx90614 library.
Bro can you send the code link
Provided in the description.
Mujhe project chahiye
I am having another brand