By the way thank you. Aapke fire fighting robot using Arduino mene apne final year engineering projects me banaya tha aur aapse what's app pe contact bhi kiya tha. Aapki madad se project to ban gaya tha. aur mera engineering pura hua Once again thank you.
@@ashutoshmishra1925 bhai mene project ka sara data delet mar diya. ab kuch nahi hai mere pass.jaha tak mujhe yaad hai, mene is video ke niche jo link hai wohi code istemaal kiya tha.koi change nahi kiya tha
Have you upload this project any website?I I saw that project a website which i unfortunately don't remember.If you upload that could you share that link.We wanna a project like that for a lesson.
Bro in flame sensor how to connect that black wire Black wire from right to front centre point.and black wire from left to leave out via hole is it correct bro
Bro how to make it in such a way that when it detects fire from long range ,it will go to it and even if obstacle comes between it , it will dodge it and go to extinguish the fire
nice work but pls I wanna know the Arduino was it programmed by u or it was an already programed one that u use.? ? am asking because a Friend told me to use an Arduino for project it must be programmed
First u need to download the code from the link in description, and paste it in arduino ide softwere ,then include librarys (servo.h and softwereserial) then click the compile, select the port and just click the upload .
I have a doubt that if the system (computer) is off will the robot work please tell me I am going to make this for my science experiments project I ordered all the things so please tell me
Sir, what should i do if i use L293D Motor Driver as the motor driver used here isnt available in my country. Pls help me. I was making this for my scince fair and later noticed the problem. Please help me sir. I would appreciate it.
@@Kiran-bl1bs Hi Kiran. I am so sorry to say this but I haven't yet get up to the coding bit (I need the PCB/ other structural system to do the code thing but I haven't yet receive the PCB). Are you also a first year uni student?
Hii bro does it works really we are ece students we are making this project please reply bro orelse our money willbe wasted. And please provide coding can we get msg and call plaz reply fast bro
I have same project like this. 360 degree fire fighting robot with 3 flame sensors ultrasonic sensor to avoid obstacles. And robot movement controlling through mobile application
Sir i have a clarification that is in the circuit diagram you're using 3.7v*2=7.4(2 batteries at motor driver position) but i want to use in that place with three 3.7v=11v at motor driver place other than submersible pump position i can use 3.7v battery at pump...so please give me a suggestion for my problem...
Everything is ok but......the twist is robot goes only 1 straight direction...it not turns left or right properly... So this is disadvt. Fix it otherwise this project is ❤️👌
Kudos 👌 ❤️❤️
Looking at the robot it seems like the first thing to catch fire will be the robot itself😂😂
Lol😂
Best Deatails video and mind-blowing
Great work 👌🏻
By the way thank you. Aapke fire fighting robot using Arduino mene apne final year engineering projects me banaya tha aur aapse what's app pe contact bhi kiya tha. Aapki madad se project to ban gaya tha. aur mera engineering pura hua
Once again thank you.
Bro I need report of your code please
@@ashutoshmishra1925 bhai mene project ka sara data delet mar diya. ab kuch nahi hai mere pass.jaha tak mujhe yaad hai, mene is video ke niche jo link hai wohi code istemaal kiya tha.koi change nahi kiya tha
@@ashutoshmishra1925 bro i delet all the data. but mene code me koi bhi change nahi kiya tha.
Theek bhai shukriya
😂hum bhi try karenge isi se
Have you upload this project any website?I I saw that project a website which i unfortunately don't remember.If you upload that could you share that link.We wanna a project like that for a lesson.
Great work Sir 💗💗
Mind blowing project
For those who have problem with pump just change High to low and low to high
Approximate cost of this project?
Sir I have done all things you did but my sim module doesn’t blink light also motor works automatically without any sense
Can I used GSM 900a instead? What changes I have to make for using 900a
kudos 💖
can we use this idea for our thesis project sir?
yep
This is a great project!! Well done..
But what is the use of relay in this ? Can you please elaborate it ?
for turning the water pump on
Yes
Excellent
cool❤️
Plsz Also give the programming which is used in arduino
Hey! The lights in flame sensor glows but it doesn't work. Can you please suggest any solution on this.
Will the kit work before inserting sim?
Bro in flame sensor how to connect that black wire
Black wire from right to front centre point.and black wire from left to leave out via hole is it correct bro
Bro can you provide this project document for better understanding?
Will the motors work with out buck converter?? Pls reply
Im looking for a help, I bought a IR sensor instead of Flame sensor, does this will still work?
I am going to do it in my sience project
We are so excited😅🎉❤
@hobbyproject
I need a Suggestion
That Can I use L293D motor driver instead of L293?? Cuz, in BD that one is not available anymore
use L298.
@@hobbyproject9557sir is the code and wire placement same for it? Or are there some Changes
Brother I dont know why but it is not working , the code which shared on the website is correct na ?
Hey can you suggest me the all product name and where you get all these andprice to
Hello, will the SIM module work in any country? I'm in Canada, will the SIM module work with Canadian providers? Thanks!
Noo
Bro i didn't understand that servo wiring can you explain i done the project completely but servo wire only is there please reply ❤❤
L293 motor controler What is possible with it?
please reply 😪😪
Bro how to make it in such a way that when it detects fire from long range ,it will go to it and even if obstacle comes between it , it will dodge it and go to extinguish the fire
Bro Arduino uno model konsa hain?
Can we make this tutorial as a reference for our capstone project?
Sure
Better use muti directional wheels. Then the moment will be a bit fast .
Hey can I use Arduino nano instead of Uno and will it work with the same code if i do so?
Please give me code
can i use L298N motor driver instead?
What is the counterfeit if i dont have L293 motor driver? I only have L293d motor driver
Excuse me, can i know how the flowchart is?? Im kinda not understand, thank you
hey listen if i want to buy this then what is the cost my budget is less than 2500 rs
👍
@Hobby Project
Bo motor wheel thik se kam nahi kar raha he
Automatic run ho raha he
Ye problem motor driver ka he ya program ka
Did u got the solution bro?? Same thing is happening with me
bro relay ka kya kam tha agar output voltage 4.5 hi rakh na tah, utn toh arduino hi provide kar sakta hai???
plz explain
What is the A1, A2, B1, B2 port of motor driver for?
Hai sir I have one doubt
Bro yeh jo extra wiring ki hai uska batado please i have to complete this project before my finals
Hai.. can u send me relay module link to buy😢...
Where did you connect vcc and ground of flame sensors.please reply sir🥺
Mq ke sath connect broo
Can I know for lm2596 which one u use? Step up or step down?
step down
Hello! I don't understand how the pump is connected 14:07 How is connected to the extra battery and hiw with the circuit? Please response
See the circut
What App or website did you use for making your Schematic Diagram?
tinkercard
Star UML
Sir I've removed rx and tx pins of sim 800l but still the code is not uploading. Please reply🥺
nice work
but pls I wanna know the Arduino was it programmed by u or it was an already programed one that u use.? ?
am asking because a Friend told me to use an Arduino for project it must be programmed
First u need to download the code from the link in description, and paste it in arduino ide softwere ,then include librarys (servo.h and softwereserial) then click the compile, select the port and just click the upload .
@@jishnu3301please give code given link in expired and not working
download using chrome.
@@hobbyproject9557 still file not supported showing
open using ide software or change its format from .ino to .text
bro can you send detailed circuit diagram bro pls
it will be help full for my project
In circuit diagram where is the Mini breadboard picture connection
bro tumne jo required components name show karne keliye text animation use kiya hoo kaise kiya
Can you please help me with my project.
Please help me with the circuit diagram😊,
I will tell u about the idea
I have a doubt that if the system (computer) is off will the robot work please tell me I am going to make this for my science experiments project I ordered all the things so please tell me
Where did you order the L293 motor driver?
@@Kiraraa-rb5if I bought it In the nearby science project shop.
Can I use L298N Motor Driver for this
Can you explain about this program or can you give me full program access please 🥺
Please give motor driver buy link I can't find anywhere
Can you please send me the architecture and flowchart of this project sir
Sir maine project same banaya.par kam nahi kar raha.plz help.
Sir, what should i do if i use L293D Motor Driver as the motor driver used here isnt available in my country. Pls help me. I was making this for my scince fair and later noticed the problem. Please help me sir. I would appreciate it.
update please, i have the same prob. l293 isnt available also in my country is it okay to use l293d?
Use L298N
Which type of jumper wires are used in this....
Please share the code... Link is not working
Bro can i use combination of two battery give more than 4.5 volt and set ot to 4.3volt using potentiometer
use lm2596 buck converter.
Thanks bro
Where should i add receiving end phone number ?
13:47 Which water pump is this? Could anyone please share the link which we can purchase it from?
Sir, can you please tell me what kind of water pump and nozzle did you used? Thank you!
5v Mini water pumb and for nozzle i have used pen tip.
@@hobbyproject9557
Hello sir,
Thank you so much for the information and have a lovely week ahead :)
@@Kiran-bl1bs Hi Kiran. I am so sorry to say this but I haven't yet get up to the coding bit (I need the PCB/ other structural system to do the code thing but I haven't yet receive the PCB). Are you also a first year uni student?
@@hobbyproject9557 sir can you tell me is it remote controlled or automatic
automatic
Bro flame sensors are detecting for sunlight also
Bro is your project working fine if yes then can u please help me
Please again share the code. Provided link is not working
Anna where give the power supply
Hii bro does it works really we are ece students we are making this project please reply bro orelse our money willbe wasted. And please provide coding can we get msg and call plaz reply fast bro
9400496834 WhatsApp
cost of all these
Can you tell the Cost of all the required product
Could you please send the detailed information about the components...
Bhai is GSM me sim card konsa us karna hai
Will sim800l support 4g Or 5g sim card? Please reply. 🥺
You can use any sim card that have a 2g band support.
I have same project like this.
360 degree fire fighting robot with 3 flame sensors ultrasonic sensor to avoid obstacles.
And robot movement controlling through mobile application
hi do u have the documentation of your project?
@Abidali-qi3xj can you please help me with the project
@@poorvi2388 yes bro
@@Abidali-qi3xjcan you send it to me??
Hello bro! If I use L293D motor driver would the result be the same? Or is there need to change code?
Hello can you share the answer with me?
Will u please send me the code of this project
@@gamingindustry893 tell your number iwill send code
how do I get the code from the google drive I can't download it or have access to it. PLS!! thankyou
Sir i have a clarification that is in the circuit diagram you're using 3.7v*2=7.4(2 batteries at motor driver position) but i want to use in that place with three 3.7v=11v at motor driver place other than submersible pump position i can use 3.7v battery at pump...so please give me a suggestion for my problem...
Do you have code
Yeah i have the code ihave downloaded not opened and opened using arduino app
Cashu Koduthu oru Puthiya Lighter Medikkadaa 😂
Coud
Bro where to connect powersupply for flame sensor
I have problem the wheel is not move which typw of fault is there
How you connect with this on phone? Please tell me
Broh relay issue. Can u advice a solution
انت كفوووو ❤
Sir I want to buy this
Everything is ok but......the twist is robot goes only 1 straight direction...it not turns left or right properly...
So this is disadvt. Fix it otherwise this project is ❤️👌
Can you provide a servi included with library
Where can i buy L293 motor driver? Badly need right now
use L298 driver.
How many jumper wire was there (1:12)
Hiii brooo
Bro u have flowchart for this project?
No.
Can we connect the wires to anywhere in the breadboard?? Pls reply
Bread board separated into two in one straight line is the single connection
Ok thanks man appreciate it!!
Ok
why is water not coming out ,sir. please tell me
Where did you get the code for Arduino?
You know the code?