Makita DIY Plunge Router Base Template Guide Base

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น •

  • @ToolsAndStuffOFFICIAL
    @ToolsAndStuffOFFICIAL  4 ปีที่แล้ว +1

    The letter templates complete with brass bushing amzn.to/2UPd4th

  • @idhatemet00
    @idhatemet00 ปีที่แล้ว +3

    solid i was wondering what size forstner bits i would need to do this, your video answered that for me, thanks. If I could add something to it though, I'd recommend drilling the 35mm counterbore first, then use the center point left by the 35mm to reference the center of the 30mm so they end up perfectly concentric 👍

  • @karlwarnes6062
    @karlwarnes6062 4 ปีที่แล้ว +1

    Way better than anything I've bought trend.

  • @stuffoflardohfortheloveof
    @stuffoflardohfortheloveof 4 ปีที่แล้ว +2

    This is why I love you tube.....was just heading for the man shed to try and make one of these but got sidetracked into having a coffee and a refreshing poo. My intention was to try to make a base that utilised the main brass back plate so I could then place the guides through it etc. Your idea is much simpler although I’m not sure I have acrylic that thick (in order to allow me to forstner out the larger ‘shelf’ hole)....think my acrylic is only 4mm. You’ve also pointed out the obvious to me in that I could not work out why the main brass plate had 4 plain holes.....dust extraction.....couldn’t fathom it. Nice one 👍

  • @bijan4727
    @bijan4727 ปีที่แล้ว

    Hello Sir. Very nice job. Well done. I use Forstner bit too but I have a lot of difficulties , it takes a long time , and at the end it is not crisp like yours. Do you use special bit ? Is it because you do it on a drill press ? Or is it something else? Please advise. I really appreciate.

  • @AndrewHelgeCox
    @AndrewHelgeCox 2 ปีที่แล้ว

    You can drill through the face of the brass bushing, a necklace of little holes, all the way around to get more suction close to the bit.

  • @davidmarsh8753
    @davidmarsh8753 3 ปีที่แล้ว

    brilliant what thickness is the perspex please

  • @makolic1
    @makolic1 3 ปีที่แล้ว

    what is the proper one and guide bush to work with trend hinge jig for door hinges ??

  • @walter.bellini
    @walter.bellini 4 ปีที่แล้ว

    Perhaps once perfected, we would be interested in purchasing that nice upgraded bling base....

  • @TakamiWoodshop
    @TakamiWoodshop 5 ปีที่แล้ว +3

    Turned out nice man - thought you were changing to Tuuls and Stuff for a minute there.

  • @kmac2014
    @kmac2014 2 ปีที่แล้ว

    Thanks for the vid. Just bought one and I feel your pain. Gonna make my own just as you recommended. Maybe I’ll cut three lager openings for the dust rather than 4 wee holes. I looked at the palm sander for clues to that problem. BTW trade you Prime Ministers! Ken from Canada (up over).

  • @ChileExpatFamily
    @ChileExpatFamily 5 ปีที่แล้ว

    Excellent video and thank you for sharing.
    I have the Makita RP 0900 and it too does not come with the guide. I at first thought that I lost it or something and spent a little time looking around the shop for it. I am thinking I will make my own too. Makita should have included this in their kit. Really lacking on Makita's part. Jim in Chile

  • @sitgesvillaapartmentneilsc7924
    @sitgesvillaapartmentneilsc7924 4 ปีที่แล้ว +1

    Really cool , what are the templates made from? I assume there re different types to do A's and other letters etc that require double routing.

  • @DavePawson
    @DavePawson 3 ปีที่แล้ว

    Was the 9mm a bit thick? Not much follower sticking out?

    • @ToolsAndStuffOFFICIAL
      @ToolsAndStuffOFFICIAL  3 ปีที่แล้ว

      The follower is the same no matter what thickness material is used.

  • @OwenDawson
    @OwenDawson 4 ปีที่แล้ว

    brand new to using routers. have the RT0701C . looks similar to yours. i have the plate that holds the bushing, but can’t figure out how to center it. purchased the funnel looking tool but don’t see any way to adjust plate to center on cone?

  • @walter.bellini
    @walter.bellini 4 ปีที่แล้ว

    Thank you really great video, nice skills you have to make all that cool stuff. Good updates for the dust extractor.

  • @ianfranks4954
    @ianfranks4954 4 ปีที่แล้ว +1

    try flute spiral router bit

  • @andrewkjar306
    @andrewkjar306 2 ปีที่แล้ว

    I was wondering if those forstner bits are 30mm and 35mm?

    • @ToolsAndStuffOFFICIAL
      @ToolsAndStuffOFFICIAL  2 ปีที่แล้ว

      Surely I say it in the video?

    • @andrewkjar306
      @andrewkjar306 2 ปีที่แล้ว

      @@ToolsAndStuffOFFICIAL oops my bad, I didn't have my phones sound on. Thank you though!

  • @rollthetape88
    @rollthetape88 4 ปีที่แล้ว

    Hi, was there a part II to this, did you make a cap for the extraction nozzle in the end to replace the gaff tape?

    • @skieoner52
      @skieoner52 3 หลายเดือนก่อน

      I saw this and decided to make one because I couldn’t find one. I can’t make them for sale but if you’re in the UK I’ll send you one or the design 👊

  • @jejkobprodukcje9060
    @jejkobprodukcje9060 ปีที่แล้ว

    Nice job!!!😊

  • @philsg13
    @philsg13 5 ปีที่แล้ว

    Good vid cheers, Had just made myself one of these over the weekend too, Except mine is for the cheap ryobi router. I did the exact same stuff up too, I drilled my hole right through with the small forstner bit first then realised I still needed to centre a bigger bit to rebate the bushing.
    Where did you get your acrylic from in NZ?
    I can only find 6mm perspex or wholesale suppliers of large sheets.

    • @ToolsAndStuffOFFICIAL
      @ToolsAndStuffOFFICIAL  5 ปีที่แล้ว

      It wasn't too big of a deal because I had already set the fence on the drill press so it was easy to line up again. The base was originally a sign that my wife brought home from work. Up to 20mm is available from some sellers on TM.

    • @philsg13
      @philsg13 5 ปีที่แล้ว

      @@ToolsAndStuffOFFICIAL cheers, will take a look! yeah I used an old acrylic book rack from work too, but wasn't perfectly flat.

    • @hanspijpers2100
      @hanspijpers2100 2 ปีที่แล้ว

      @@ToolsAndStuffOFFICIAL Drilling the bigger one first, halfway and then ending with the smaller one for the rest ?

  • @HomeImProveMentHow
    @HomeImProveMentHow 5 ปีที่แล้ว

    How's it going I'm dropping in fr Make Things.
    Thank you for sharing this was a nice tutorial on how to make this base yourself in the vacuum setup is pretty cool.
    ... I look forward to hear from you keep up the good work God bless bye for now Ken

  • @permanentwave
    @permanentwave 3 ปีที่แล้ว

    im new to this what does the guide bushing do ?

    • @johnmcbean9935
      @johnmcbean9935 3 ปีที่แล้ว

      Allows you to follow templates, like the letter he used in the video. Those are called Porter Cable types if you Google it. You can buy kits with various sizes. The adapters are easy to find.

  • @RayW808
    @RayW808 3 ปีที่แล้ว

    0:35 Anyone know what that bit/guide thing is called? Thanks if I get answer, I hate you all if not :-)

    • @RayW808
      @RayW808 3 ปีที่แล้ว

      nm found it, Self-Centering drill bit guide...

    • @ToolsAndStuffOFFICIAL
      @ToolsAndStuffOFFICIAL  3 ปีที่แล้ว +1

      Look in the description.

    • @RayW808
      @RayW808 3 ปีที่แล้ว

      @@ToolsAndStuffOFFICIAL I did, maybe I missed it.

  • @Pyper70
    @Pyper70 4 ปีที่แล้ว

    Any particular reason you went with a 9mm acrylic stock? Was your guide bushing tall?

  • @arvindkesa8746
    @arvindkesa8746 5 ปีที่แล้ว

    Hey mate, where did you buy the template guide from? Cheers

  • @alanmullock381
    @alanmullock381 5 ปีที่แล้ว +1

    Ingenuity is alive and well in New Zealand!👍👍👍👍👍👍👍🤣🤣🤣🤣🤣🤣🤣

  • @andrewmitchell3289
    @andrewmitchell3289 5 ปีที่แล้ว

    Great stuff, really impressed

  • @craigwheatcroft9233
    @craigwheatcroft9233 5 ปีที่แล้ว +1

    Just buffers cant watch it all you should sell these I'd buy one

  • @benmarsom3381
    @benmarsom3381 5 ปีที่แล้ว

    Auckland?

  • @christopherkennedy314
    @christopherkennedy314 4 ปีที่แล้ว

    Tunage!😎

  • @credibility63
    @credibility63 4 ปีที่แล้ว

    The problem with dust collection is that the bushing covers almost the whole template. There's very little room to suck out the dust. If you were to rout without the guide bushing dust collection would be fine, but your templates wouldn't. Seeing how thick the polycarbon base is you could probable cut four circular slots around the bushing with maybe five millimetre left between slots. should be strong enough.

  • @vru1012
    @vru1012 5 ปีที่แล้ว

    Супер
    Я себе тоже такую сделаю

  • @dadduorp
    @dadduorp 3 ปีที่แล้ว

    You should consider manufacturing these and have yourself a $$ side gig there. I can use one of these but don’t have the ancillary equipment to make one.
    Just sayin.’

    • @ToolsAndStuffOFFICIAL
      @ToolsAndStuffOFFICIAL  3 ปีที่แล้ว

      I don't have the time anymore. Too busy reviewing tools. Besides most wouldn't want to pay the price it would have to be. But I did think about doing it some time ago...

  • @uriuriuri
    @uriuriuri 4 ปีที่แล้ว +1

    When do I drop my second pinga?
    Just kidding. Great job. Go kiwis 🥝✌🏼

  • @oneeyedphotographer
    @oneeyedphotographer 4 ปีที่แล้ว

    The music is appalling.

  • @permanentwave
    @permanentwave 3 ปีที่แล้ว

    im new to this what does the guide bushing do ?

    • @ToolsAndStuffOFFICIAL
      @ToolsAndStuffOFFICIAL  3 ปีที่แล้ว +1

      Watch the video and you will find out.

    • @idhatemet00
      @idhatemet00 ปีที่แล้ว +1

      bro lol you're on youtube, just watch the video or look it up?