*I absolutely love this tool!!! The first one was defective and Dewalt replaced **MyBest.Tools** More bulky than the Bosch and Makita corded palm routers I have but worth it. Nice solid base*
Do not clamp the cutter in this way. Use two wrenches (there are specially two in the set). If you use one (as you did at 7:50) there is a chance to destroy the body of the unit.
Does anyone have an issue with the guide bushing it comes with not being centre to the bit or collet and know how to fix it? It goes off centre when i clip the lever down it looks like
I don't understand how the guide goes on. The 2 shoes on the guide do not slip into the router housing?. They just sit either side of that little square. Also does the guide sit in between the 2 split washer on the thumb turn. Nice video bro
NEVER use one spanner to lock or unlock the collet while you're changing the bits. Always use two spanner, why do you think Makita included the two spanners with the kit? you'll damage the router casing eventually if you use one spanner. Not very professional.
*I absolutely love this tool!!! The first one was defective and Dewalt replaced **MyBest.Tools** More bulky than the Bosch and Makita corded palm routers I have but worth it. Nice solid base*
Nice demonstration, easy to understand, thank you.
Согласен, великолепный инструмент.
Купил себе, только сетевой.
Спасибо, что показали некоторые нюансы эксплуатации.
Do not clamp the cutter in this way. Use two wrenches (there are specially two in the set). If you use one (as you did at 7:50) there is a chance to destroy the body of the unit.
But the manual specifically mentions both ways to do it
@@BambooTimeit can break use both spanner’s
take off battery when you change bit, because you can really quick lost your fingers.
I really when I was editing the video 😆
Прекрасный инструмент! У меня похожий Drillpro, а аккумулятор приспособил через самодельный адаптер от Nawin. Всё получилось очень хорошо.
3:04 Do you know where we can mount that?
I would use a cast aluminum fence to eliminate any flexion, hopefully with a micrometer adjustment. I don't know if one exists.
У меня точно такой же, только копия😎 Ваша модель- зверь-машина) Кстати, зачем вы используете параллельный упор, если у вас фреза с подшипником?🤔 5:28
Does anyone have an issue with the guide bushing it comes with not being centre to the bit or collet and know how to fix it? It goes off centre when i clip the lever down it looks like
I don't understand how the guide goes on. The 2 shoes on the guide do not slip into the router housing?.
They just sit either side of that little square.
Also does the guide sit in between the 2 split washer on the thumb turn. Nice video bro
Simpli the nut squished the bit and because there is an opposite twist compared to the turns, it should not loose.
THANK YOU!
Thank you!
Moi je besoin on fait comment
Traduire en Francais.Mercie 😊
Please, I want a piece of it with an air conditioner, I can get it.. Thank you
NEVER use one spanner to lock or unlock the collet while you're changing the bits. Always use two spanner, why do you think Makita included the two spanners with the kit? you'll damage the router casing eventually if you use one spanner. Not very professional.
why would you wear gloves? :D...
😎👌👍
.
Use Tripod. It’s not comfortable Watching one handed yt videos.
Ok good. Remainder of video you use tripod.
Dewalt…