Install HONDA Clutch, Flywheel & Main Seal - with DIY Tools - Honda ACURA Integra

Today I replace the Flywheel and clutch with new parts and I make special tools so I can do the job properly just like the Service Manual describes. I also replace the B-Series engine's Rear Main Seal which sits behind the Flywheel. The basic fabrication and use of these tools will be universal across many different cars. The car today is a Honda or Acura Integra DC2 Type R aka DC2R Exedy OEM
🔔 Hit the bell next to Subscribe so you don't miss the next video!
OEM Parts used:
91214-PLE-003 Rear Main Seal 91214PLE003
90011-PH3-000 Flywheel Bolts 90011PH3000
90034-689-000 Pressure Plate Bolts 90034689000
OEM Clutch plate to maintain the nice easy OEM feel
New Exedy Lightweight Flywheel
Be Cool... Send me something :)
Uzumaki Garage
PO Box 666
Belconnen ACT 2616
AUSTRALIA
00:00 Intro
00:33 Modify socket for removing Flywheel Bolts
01:21 Make a bracket to hold flywheel while removing bolts
02:14 Removing Flywheel Bolts
02:24 Removing Rear Main Seal from engine
03:06 Replacing Rear Main Seal
04:23 Preparing new Flywheel with Bearing and Dowel Pins
05:14 Making a Flywheel Ring Holding Tool
06:27 Preparing Flywheel bolts for Thread Locke
08:20 Preparing for Clutch plates installation
09:43 Outro
If you would like to support my channel or send me something cool for me to talk about or use in my workshop. My postal address is below Cheers! :)
This is not a DIY, I'm not a trained mechanic.
If I have made any mistakes in this video please let me know.
I know sometimes my videos are very basic but hopefully they will help some people. I also like to document what I do to the car with video while trying to be creative. Most of the time I do everything here myself which is a big job and its hard to remember everything, But I shoot most of this stuff with my old iPhone and sometimes my old GoPro. The "Pieces to Camera" I film with my Canon 5D so I don't even use a proper video camera at all. Although I would love to get a SONY FX3 some day to go with the gimbal I recently bought as that will open up a lot of creative shots in future videos.
NEW! Try the Closed Captions options button on TH-cam on this video
Take a look at my Instagram Account @uzumaki.garage which is mostly photos of my own cars
Uzumaki Garage is based in Canberra Australia. We love many things about Japan and can't wait to return. But until then we celebrate and enjoy Japanese food, music, whisky, tattoos and the modern classic JDM cars.
Always wear Personal Protective Equipment (PPE) when working on your car or in your garage. Sanding, grinding and painting is dangerous to your health and life. Follow the manufacturers recommended safety procedures not mine. Read the instructions and download the PDF safety sheets.
Disclaimer:
Owing to factors beyond the control of Uzumaki Garage/Andrew Hogan, it cannot guarantee against unauthorized modification of this information, or improper use of this information. Uzumaki Garage/Andrew Hogan assumes no liability for property damage or injury incurred as a result of any information contained in this video. Uzumaki Garage/Andrew Hogan recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of Uzumaki Garage/Andrew Hogan, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not Uzumaki Garage/Andrew Hogan.
Disclaimer #:2
The videos on this channel are for entertainment purposes only.
Do Not Copy what I do in my videos. Best to take your car to a licensed qualified professional. Use the information I share or describe in my videos "AT YOUR OWN RISK". Fuel leaks can cause your car or property to catch fire. Fuel vapours are dangerous and should not be inhaled.
Uzumaki Garage accepts no responsibility or liability for property damage or injury incurred as a result of any use of the information contained in this video channel.
Uzumaki Garage makes no representation and assumes no responsibility to the accuracy of information on this channel.
I am not a qualified mechanic. Working on cars is dangerous and can cause serious injury to you or someone else. Working on your car you can render it unsafe, unroadworthy and negate its warranty. Running your car's engine in a confined space can kill you. If you make a mistake working on your car you can easily destroy your engine, start a fire or destroy your property. Do not copy the things I have done in my videos, I am just showing what I have done but I am not saying I have done it correctly.

[@frias2287]

Good job brother mega like 👍👍💯

[@SPARTANASASIN]

Editing was great in this vid! The Integra deserves this level of care, those special honda tools are definitely keeping it at top factory spec

[@UzumakiGarage]

Thanks very much mate. Positive feedback motivates me to keep making videos. I like to do the best work I can on the car and I take my time doing the job and filming it in case it can help someone else in the future.

[@rogerprice981]

Nice video

[@UzumakiGarage]

Thanks!

[@reza_dc2]

Great videos ~ love them all . .. Please do a timing belt video for the B series motor. Thanks ~

[@UzumakiGarage]

Thanks very much mate. Yes I probably will do the timing belt on this car next year. cheers :)