I just learned about the horizontal balance that no other person shows in their video of balancing the Weebil S, thanks you learn a hidden secrete all the time from people.
I've looked at so many vids on how to balance and I just could not get it. lol I'm not sure if its because this vid was short and sweet or maybe you had better angles than most. idk but THANKSS!
Hope for more weebills videos :) As what settings to have and so on. I have a Canon M50 and I haven found any proper settings that works for my shoots. Much thanks!
There can be shaky oscillating footage, definitely battery drain but unlikely to damage the motors unless it’s a long way out, and then it should shut down as a safety cut out.
After balancing, when I turn on my gimbal, the motor automatically completely keeps tilting down or up the camera until the end of the limit. Can you help me out ?
My horizontal balance doesn't budge. I loosen the screw and it doesn't move. I'm about to break this thing. Everyone loosens the screw and it moves. I loosen that same screw and it won't budge at all. So utterly frustrating!!
I need some help, I have similar setup but with XT2 and 35mm F2 WR lens... the problem is it’s perfectly balanced but still vibrating. I have changed all motor settings, lowered the power and everything, still same issue :( Any idea?
Autotune also didn't work for me. Neither did just putting it on low so I went into 'Motor' 'Custom' and turned down the motor that was vibrating, for me it was the roll, until the vibrating stopped, which for me was at 15. My Set Up : Sony A6400 - 16mm Sigma - Moment Cinebloom Filter - Moment ND filter - Rode VideoMic GO II with Fur Windshield (Side Mounted)
you go way to fast. When you describe each area like "roll access" for example you should point to that area and give time for the viewer to understand that location. Even better you could add text that highlights that area.
I just learned about the horizontal balance that no other person shows in their video of balancing the Weebil S, thanks you learn a hidden secrete all the time from people.
Exactly what I needed! Thank you for the solid video.
Finally. Someone going straight up to the point. I love it. Thanks
Thank you. Glad it helped
I am watching this as soon as I get off..been using mine for a yr now..winging it 😅😅
Finally after 10 other videos, I got it! Thanks
Glad it helped!
I can't believe you did this instruction video on a straight down angle
not sure if you still upload here but thanks a million lol I watched nearly every video on how to set up this thing
Thank you! This was super useful!
Yes! Finally! I love the video, easy smooth ! My gimbal is balanced properly. New sub here :) Thank you for the video!
that was very smooth and easy and helpful ..... Thank you
Great, thanks Joey 👍
finally the best video
Admittedly, I skipped to 'The Easy Way' chapter but this was well done 👍
Thank you so so so much! God bless you for me ooo! This was really helpful ooo! Chai. Thank you 🎉🎉🎉
I've looked at so many vids on how to balance and I just could not get it. lol I'm not sure if its because this vid was short and sweet or maybe you had better angles than most. idk but THANKSS!
Thanks a lot! This video helped.
Super helpful abd just subscribed!
Glad it was helpful. Thanks for the sub
Hope for more weebills videos :) As what settings to have and so on. I have a Canon M50 and I haven found any proper settings that works for my shoots. Much thanks!
Thanks,this helped a lot
Thank you. I’m glad it helped!
Aftr following all that my tilt axis that i adjusted first is not straight. Should i re adjust it aftr adjusting all
Yes you can fine tune that at the end. If your lens changes length with focus, set it mid way first.
@@tripleeightproductions what happens when gimbal isnt properly balanced? Shaky footage, battery drain, or motor damage?
@@tripleeightproductions also thanks for the reply ❤️
There can be shaky oscillating footage, definitely battery drain but unlikely to damage the motors unless it’s a long way out, and then it should shut down as a safety cut out.
@@tripleeightproductions ohh i see, thanks mann
Thank you so mich brother
Hey thanks. My Weebill S Pan Axis is spinning crazy after using Vortex Mode. Help!
Just after i turn it on it spins on its pan axis
Hmm, I don’t know. Try doing a factory reset, failing that a firmware update. I presume it’s correctly balanced and the batteries are good?
These levers are not locking no matter how much i tighten them up. Am i doing something wrong?
Nice video 👌🏼
Thank you!
After balancing, when I turn on my gimbal, the motor automatically completely keeps tilting down or up the camera until the end of the limit. Can you help me out ?
Why my new weebil vibrate. Still setup my gimbal
My horizontal balance doesn't budge. I loosen the screw and it doesn't move. I'm about to break this thing.
Everyone loosens the screw and it moves. I loosen that same screw and it won't budge at all. So utterly frustrating!!
HEY GUYS I have BMPCC 6K PRO and I am unable to balance my camera it always leans to the side... I cant move it any further to the left.
I need some help, I have similar setup but with XT2 and 35mm F2 WR lens... the problem is it’s perfectly balanced but still vibrating. I have changed all motor settings, lowered the power and everything, still same issue :(
Any idea?
Autotune also didn't work for me. Neither did just putting it on low so I went into 'Motor' 'Custom' and turned down the motor that was vibrating, for me it was the roll, until the vibrating stopped, which for me was at 15. My Set Up : Sony A6400 - 16mm Sigma - Moment Cinebloom Filter - Moment ND filter - Rode VideoMic GO II with Fur Windshield (Side Mounted)
Your weebill s loooks different than mines. I don't have that grey thing that you have
Best video on this.. Well done and thank you.. Sub'd
Can't even see what you're doing.
you go way to fast. When you describe each area like "roll access" for example you should point to that area and give time for the viewer to understand that location. Even better you could add text that highlights that area.
You lost me around 3:39